Fanvil Apartment Indoor Station in Dubai, UAE

Fanvil indoor stations are apartment-side communication terminals used with compatible SIP door stations and building entry systems. Select from model-dependent touchscreen, connectivity, monitoring and access-control options for residential and mixed-use developments.

A successful purchase starts with a defined station model, entrance-device compatibility, network architecture and building operations plan rather than an assumed universal specification.

Request Quote Review Specifications

B. Quick Procurement & Configuration Matrix

C. Executive Product Architectural Overview

An apartment indoor station is the resident-facing endpoint in a wider building communications system. At the entrance, a compatible outdoor door station identifies a visitor and initiates a call. The indoor terminal presents an incoming-call interface, carries voice and potentially video, and allows an authorized resident to request door release. In many projects, the communication signaling is based on SIP, while the media session, video decoding and access command depend on the participating products and system configuration. A procurement team should therefore think in terms of a complete communication path rather than a single screen mounted in a hallway.

Fanvil’s indoor station portfolio spans simpler terminals and more advanced touchscreen equipment. The appropriate choice depends on user interaction, the expected entrance video experience, the number of associated door stations, resident accessibility requirements and the level of integration with management or security infrastructure. Different products may run different operating systems and expose different interfaces. A touchscreen specification should not be interpreted as evidence that every third-party application will run, or that every access controller can be operated without additional integration.

For a new Dubai apartment development, the design process normally begins with unit count, entrance count, concierge arrangement and the required distinction between private apartment calls and shared building announcements. A small residential block with one lobby entrance may be relatively straightforward. A high-rise property with service entrances, parking access, multiple towers and a central control room requires a more deliberate numbering plan, network segmentation and resilience model. A consistent resident experience matters because equipment is used by children, elderly residents, visitors and maintenance teams with different technical expectations.

The indoor station also sits at the intersection of physical security and IP networking. Video performance can be affected by network congestion, codec compatibility, endpoint configuration and camera stream capabilities. Door release requires a trustworthy access-control path; the terminal should not be treated as the sole security authority. Designers should define where authorization occurs, how door controllers are protected and how logs are maintained. The exact capabilities of each Fanvil product should be checked against the current vendor documentation and the selected intercom ecosystem.

In retrofit projects, the first question is whether existing cabling and entrance hardware support an IP-based solution. Legacy analog wiring cannot automatically be assumed to carry Ethernet or deliver adequate power. The contractor may need to test cable routes, add switches, install power supplies or replace outdoor devices. In mixed-vendor environments, a SIP label alone is not proof of full interoperability: audio, video, event handling, unlock commands and provisioning behavior should be tested independently.

From an asset-management perspective, apartment terminals are deployed in large numbers and remain in service for years. Procurement should account for spare devices, configuration backups, labeling, firmware maintenance, apartment turnover and the operational consequences of a failed endpoint. Standardizing on an approved model can simplify training and replacement, while using multiple models may make sense when premium apartments or accessible units require different interfaces. FourTeck can assist with product selection discussions and quotation coordination, with any installation or engineering service scope to be agreed explicitly.

D. Enterprise Business Value and Lifecycle Benefits

Return on investment for residential intercom systems is usually operational rather than a guaranteed monetary figure. Potential benefits include fewer manual access interventions, more consistent visitor handling and reduced administrative overhead. Actual savings depend on staffing practices, building scale and integration maturity. An evaluation should compare the current workflow against a documented target process, including exceptions such as unattended deliveries and maintenance access.

Long-term value also depends on managing change. A property may introduce new entrance devices, change network providers or renovate common areas. The selected indoor station should be assessed for documented compatibility, firmware support and a reasonable spare-unit strategy. These considerations often matter more than cosmetic differences between similar displays.

E. Hardware and Technical Architecture Highlights

At a functional level, an indoor station combines a display and user interface, an audio subsystem, a network communication stack and application logic for calls and access functions. Video-capable models decode a supported media stream from a door station or camera, while audio circuitry manages microphones, speakers and call control. The processing platform and memory architecture vary by product, and should never be inferred from another model in the same family. Procurement specifications should quote the precise manufacturer’s datasheet rather than a generic family description.

The screen affects how residents interact with the device. Some stations prioritize straightforward call-answer and unlock controls, while touchscreen models may offer richer navigation, camera selection or configurable features. Screen size is not a reliable proxy for interoperability or processing capability. Review viewing angles, installation height, brightness needs and the clarity of call-state indicators in a real apartment setting. Accessibility and language requirements should be included in the acceptance test.

Networking may involve wired Ethernet, model-dependent Wi-Fi and SIP signaling. Wireless connectivity can be useful where structured cabling is impractical, but it introduces coverage, roaming, interference and credential-management questions. Wired links are commonly preferred for predictable performance in dense multi-unit properties. Where PoE is supported, switch budgets should account for simultaneous operating load and engineering margin. Verify whether an adapter is supplied or separately required.

Input and output interfaces vary materially. Certain Fanvil models support alarm inputs or relay-related integration, but the quantity, electrical ratings and software behavior are not universal. The integrator must verify sensor compatibility, wiring topology and safety requirements. An alarm input should not be described as a certified fire-alarm system connection without explicit engineering approval. Critical life-safety functions must remain compliant with the building’s approved safety design.

Management features can include local web administration, configuration provisioning and firmware updates on supported devices. Those capabilities should be assessed for secure transport, credential policies, rollback options and maintenance windows. The project’s technology stack may include SIP servers, intercom controllers, network switches, VLANs and access-control platforms; the indoor station is one endpoint in that chain. Test every intended integration using the exact hardware revision and firmware selected for purchase.

F. Technical Specifications and Sizing Notes

A product-family page cannot responsibly promise a single screen dimension, processor, alarm-input count or wireless standard. Fanvil offers several distinct generations and variants. For example, its published i500-series introduction discusses both seven-inch and 10.1-inch touch display options across the family, as well as model-dependent Android and Linux platforms. These family-level statements do not establish the configuration of an unidentified station.

Before approving a bill of materials, obtain the exact model code and current revision-specific datasheet. Compare the required display behavior, codec compatibility, mounting dimensions, power method and accessory package. Check whether the quoted part number includes wireless connectivity and whether any integration feature needs a separate controller, server or license. If a project specifies a particular camera or door station, request evidence of interoperability testing. Firmware versions can affect functionality and should be recorded in commissioning documents.

For high-volume orders, the engineering team should sample-test representative units before releasing the full quantity. Record the actual power draw, network registration behavior, call setup time, video quality and door-release response in the target environment. Document exceptions clearly. A successful pilot is a stronger basis for purchase than broad compatibility language.

G. Configuration, Sizing and Deployment Workbench

01 / Define the building communication map

List every apartment, tower, entrance, concierge position and controlled door. Identify whether each residence needs one station or several, and whether residents must answer calls from parking gates, reception desks or service entrances. Build a numbering plan before assigning endpoint credentials. A clear map prevents duplicate identities and avoids costly renumbering after installation.

02 / Establish traffic and headroom

Estimate simultaneous call sessions during visitor peaks rather than multiplying a theoretical maximum by apartment count. Include audio and video bandwidth, switch uplinks and the capacity of the chosen registration or management platform. Use realistic margin for future phases and seasonal peaks. The network architect should validate media paths and quality-of-service policies through representative testing.

03 / Verify entrance and camera interoperability

Create a device matrix containing every outdoor station, camera, SIP platform and access controller. Test incoming audio, video preview, call rejection, transfer behavior, unlocking and reconnection after a network interruption. Check whether cameras require a particular streaming protocol, codec or authentication method. A successful audio call does not prove the entire feature set is compatible.

04 / Engineer network ports and addressing

Allocate switch ports for all wired stations, reserve addresses or define DHCP policy, and segment security devices from ordinary resident internet traffic. Determine how DNS, time synchronization and SIP routing will be provided. Avoid assuming that a residential Wi-Fi network offers adequate reliability for building access communications. If wireless models are selected, complete a coverage survey and plan credential changes.

05 / Design power and environmental readiness

Confirm the supported PoE standard or adapter specification for the selected SKU. Add the load of entrance panels, controllers, switches and any supporting servers to the power design. If uptime during short power interruptions is required, assess UPS runtime across the complete communication path. Check mounting depth, cable exit, wall construction, humidity and direct sunlight exposure at the planned installation point.

06 / Review licenses and management boundaries

Separate functions provided directly by the endpoint from those supplied by external platforms. SIP registration, mobile-app access, cloud management, concierge routing and recording may have different requirements and commercial terms. Do not assume that a station purchase includes third-party software entitlements. Ask for a written feature responsibility matrix identifying vendor, integrator and property-management obligations.

07 / Pilot before mass deployment

Commission a sample group representing different floor levels, network segments and resident scenarios. Test normal operation and failure cases, including a disconnected network cable, switch restart, lost server registration and rejected door-release request. Capture firmware versions, configuration backups and issue logs. Resolve repeatable faults before bulk installation begins.

08 / Plan handover and long-term support

Create a device register with apartment assignment, serial number, IP information and maintenance ownership. Provide residents with concise instructions for answering, monitoring and unlocking. Train facilities personnel to distinguish endpoint problems from network or controller faults. Establish a spare stock policy and documented warranty claim process before building occupancy increases.

H. Industry Use Cases and Workload Scenarios

Residential towers and apartment communities

A multi-storey building may require visitor calls from a lobby panel to individual apartments, plus selected interactions with concierge staff. The solution should preserve privacy between units, provide understandable call identification and prevent unauthorized door-release commands. The precise model should reflect resident usability and the building’s intercom platform.

Premium villas and gated compounds

Villa deployments may combine a front-gate intercom, pedestrian entrance and internal communication point. A larger touchscreen can be attractive where residents want a more visual interface, but buyers must validate supported camera feeds and controller logic. Outdoor environmental requirements apply to the gate equipment, not automatically to the indoor station.

Hospitality and serviced apartments

Managed accommodation has frequent occupant changes and may require a repeatable reset or reassignment workflow. The property operator should define whether calls route to a room, front desk or security office. Equipment selection should consider maintenance access, configuration retention and the privacy implications of changing occupants.

Healthcare staff accommodation

Staff housing may benefit from controlled visitor access and consistent communication between residential units and a staffed entrance. However, an indoor station should not be substituted for a certified clinical alarm or emergency response system. Any emergency integration requires a separately reviewed design with appropriate service-level and regulatory requirements.

Government and institutional residences

Institutional buyers often emphasize documented access policies, segmented networks and lifecycle records. Procurement teams should require traceable model numbers, firmware documentation and a security review before rollout. Any government-specific approval or cybersecurity certification must be verified for the actual product and installation context.

Retail and mixed-use property

Mixed-use developments can include apartments above shops, office suites and shared loading zones. Communication routes must be defined carefully so commercial traffic does not interrupt residential privacy. A site-wide plan can differentiate entrances and establish appropriate call destinations without exposing unrelated units to one another.

Education campuses and student housing

Student residences may have high occupant turnover and varying visitor policies. Centralized documentation, simple user interfaces and controlled provisioning can reduce support burden. Designers should establish how room reassignment, temporary access restrictions and shared entrances are managed while respecting the institution’s data policies.

I. Technical Feature Deep Dives

I-1. Processing, throughput and workload performance architecture

The user experience begins when an entrance panel initiates a call. A successful sequence involves endpoint reachability, signaling, media negotiation and a clear presentation on the indoor station. Call setup delay can be caused by SIP infrastructure, network routing, authentication, device load or incompatible settings. It is not appropriate to attribute every delay to the indoor station’s processor. Testing should isolate each stage and record observable response times.

Video quality depends on the source camera, encoding profile, network conditions and the indoor endpoint’s decoding support. The integrator should agree on a supported resolution, frame rate and codec combination before deployment. Higher theoretical camera resolution does not guarantee a better image if the terminal or network cannot sustain the stream. A pilot should evaluate facial detail, motion, lighting transitions and image recovery after temporary packet loss.

Audio clarity matters just as much as video. Entrance areas can be noisy, reverberant and exposed to wind, while apartments may contain television or household noise. Microphone placement, echo control, volume settings and network quality influence intelligibility. Test two-way speech under realistic conditions and document the acceptable baseline. Resident satisfaction often depends more on reliable voice communication than on the number of optional features.

In larger projects, concurrent traffic requires attention to the shared SIP platform and network rather than merely counting terminals. Separate call signaling from media capacity estimates and include uplink oversubscription. Network monitoring should make it possible to distinguish local cabling faults, switch congestion and upstream service issues. Designers should avoid specifying unverified maximum station counts or unlimited scaling claims.

I-2. Security, redundancy and system resilience

The indoor station participates in a physical access workflow, so credential management is essential. Default passwords should be changed, unnecessary services disabled where supported and administrative access restricted to trusted networks. Firmware maintenance should follow a tested change process. The endpoint must not be treated as a replacement for an access controller with appropriate authorization and audit capabilities.

Network segmentation can limit exposure if a resident device or unrelated system becomes compromised. A dedicated security VLAN, controlled management access and documented firewall rules may be appropriate depending on architecture. Remote support channels should be approved by the property owner and protected with suitable authentication. Whether encrypted signaling and media are available must be confirmed for the exact endpoint, server and firmware combination.

Resilience planning begins with a failure-mode assessment. Consider loss of mains power, a failed PoE switch, interrupted SIP service, disconnected entrance panel and damaged cable. Determine which functions must continue, which should fail safely and how staff will respond. A UPS supporting only the indoor terminal does not preserve communications if the rest of the chain is offline. Door release behavior must follow the site’s fire and life-safety engineering requirements.

An alarm-input feature should be handled carefully. Some stations support sensor connections, but an input’s presence does not prove regulatory suitability for life-safety signaling. Alarm event delivery, acknowledgement and escalation must be designed as a complete process. Critical systems should remain independent unless a qualified engineer approves a specific integration and the required authorities accept it.

I-3. Remote management, telemetry and infrastructure integration

Managing dozens or hundreds of stations manually can create configuration drift. Where supported, centralized provisioning or configuration templates can help standardize accounts, server addresses and feature settings. The engineering team should test how credentials are distributed, whether configuration transport is protected and what happens after a factory reset. Management capability varies by model and firmware.

Operational telemetry should support a simple question: can the resident receive and answer the next entrance call? Useful indicators may include registration state, network connectivity, device reachability and relevant event logs. The availability of each metric depends on the product and management stack. Monitoring must be implemented with appropriate access controls and data-retention practices, particularly where visitor images or call records are involved.

Firmware upgrades deserve a staged rollout. First test a representative device against the existing door station, controller and SIP server. Record the initial firmware version, settings and test results. Then validate audio, video, unlock behavior and recovery from reboot. Only after the pilot succeeds should a wider deployment be considered. Where rollback is unsupported, the maintenance plan should include a spare unit or other recovery path.

Integration is an engineering task, not a marketing checkbox. SIP compatibility may support calling while proprietary commands, camera discovery or door-release behavior remain different. A project acceptance document should identify each supported workflow and the party responsible for resolving cross-vendor issues. This approach reduces uncertainty at handover and provides a repeatable reference when a device is replaced years later.

What Buyers Should Check Before Purchase

01 / FIT — Configuration Fit and Model Sizing

Confirm apartment count, number of indoor terminals per residence, screen preference and accessibility expectations. Decide whether the user needs basic answering and unlocking or additional camera monitoring and programmable interactions. Compare models using current manufacturer datasheets and a demonstration. Do not use a family-level feature description as the specification for every variant. Record the exact part number, finish, firmware baseline and any accessory requirements.

02 / MATCH — Compatibility and Environmental Requirements

List every entrance station, SIP server, access controller, camera and network component. Verify supported call signaling, audio/video formats, unlock commands and management methods. Confirm mounting surfaces, cable routes, power supplies and switch port availability. For wireless variants, survey coverage rather than relying on nominal Wi-Fi specifications. Check the device’s indoor environmental limits and ensure the installation avoids unsuitable heat, moisture or physical exposure.

03 / TERMS — Availability, Delivery and Warranty Terms

Request a written quote identifying model, quantity, included accessories, delivery location, taxes, lead time and warranty conditions. Confirm whether stock is ready, sourced to order or subject to substitution. Ask how defective units are handled and whether regional warranty service is applicable. If a project has staged handovers, specify shipment batches and acceptance milestones. Avoid basing construction schedules on an unconfirmed availability assumption.

04 / REQUEST — Quote Preparation Data Needed

Send the proposed model or a clear requirements list, total unit count, building type, existing door-station brands, network/power constraints and desired delivery date. Include drawings or a simplified entrance-to-apartment communication diagram where available. State whether configuration, testing or installation services are requested separately. This information helps FourTeck coordinate a more relevant commercial response and identify missing compatibility questions before procurement approval.

K. UAE Regional Availability and Service Ecosystem

FourTeck can receive inquiries from buyers across the UAE and coordinate model selection and commercial quotations. Actual inventory, delivery timing, installation support and warranty arrangements must be confirmed for each order. Sharing a complete bill of materials and project schedule helps reduce quotation revisions.

K1. Dubai Supply and Logistics Support

Dubai apartment developers, system integrators and property managers can request project pricing for Fanvil indoor stations. Include the delivery zone, site access requirements and any free-zone documentation needs. Staging, labeling or configuration support should be specified in the request and confirmed as part of the agreed scope. Lead times are not guaranteed without a written quotation.

K2. Abu Dhabi and Al Ain Logistics Reach

Projects in Abu Dhabi and Al Ain may involve corporate residences, institutional housing or large property portfolios. Procurement teams should provide building schedules and phased delivery requirements so sourcing and shipment coordination can be evaluated. Compatibility validation remains essential when an existing entrance system is being retained.

K3. Sharjah and Northern Emirates Logistics Infrastructure

Buyers in Sharjah, Ras Al Khaimah, Fujairah and Umm Al Quwain can request supply coordination for residential intercom projects. A clear location and quantity schedule helps establish delivery feasibility and commercial terms. For mixed-use developments, include the number of shared entrances and the intended communication platform.

K4. Ajman and Surrounding Emirates Logistics Coverage

Ajman property operators and contractors can seek quotation assistance for new installations and replacements. Confirm the existing station model, mounting arrangement and wiring before choosing a replacement. Physical fit alone does not guarantee compatibility with the previous intercom system.

L. GCC and Pan-African Supply Chain Reach

Regional project inquiries may require export documentation, shipping coordination and destination-specific compliance checks. Commercial feasibility, duties, customs requirements, delivery times and local service coverage must be confirmed before accepting an order. Buyers should provide destination, consignee and project quantities early in the quotation process.

L1. Saudi Arabia (KSA)

Saudi residential and mixed-use projects can submit model and quantity requirements for sourcing review. Confirm local import rules, destination city and compatibility with the planned intercom system before finalizing equipment schedules.

L2. Qatar

Qatar buyers should specify whether the requirement is a new installation or a replacement of existing stations. Export logistics and documentation are assessed on a project basis, with product availability and delivery terms confirmed in writing.

L3. Oman

Oman system integrators can request guidance on model selection and commercial sourcing. Provide a door-station compatibility matrix and destination details to support accurate quotation coordination.

L4. Kuwait

For Kuwait project inquiries and regional procurement coordination, consult FourTeck Kuwait. Confirm the selected model, quantities, shipping terms and any local certification needs.

L5. Kenya and East Africa

Kenyan integrators and property developers can route project inquiries through FourTeck Kenya. Include power architecture, deployment scale and destination details for a meaningful supply discussion.

L6. Uganda

Ugandan buyers can contact FourTeck Uganda for regional procurement inquiries. Confirm local delivery and support terms before scheduling installation.

L7. Pan-African Logistics and Trade Reach

Multi-country projects can submit consolidated requirements through FourTeck Africa or FourTeck global. Each destination may have different import, tax, warranty and documentation requirements; none should be assumed uniform across the region.

M. Related Fanvil Models and Compatible Alternatives

Fanvil i501/i501W: Consider these current indoor station variants when the project calls for an appropriate entry-level resident endpoint. Compare wired and wireless options by exact part number, and validate display and integration needs against the official datasheet. Do not assume identical network features across suffix variants.

Fanvil i504/i504W: Evaluate these SIP indoor stations when the user-interface and connectivity profile fits the property. Check screen characteristics, mounting and supported intercom workflows before selection. Their position in the product family does not automatically establish a universal upgrade path.

Fanvil i505/i505W: These Android-family options may suit projects that specifically need supported customization or application workflows. Additional software functionality requires validation, licensing review and a security assessment. Android branding is not a guarantee of unrestricted third-party application compatibility.

Fanvil i506W: Compare this model where its published interaction features and wireless capabilities align with the building plan. Test the selected entrance devices and determine whether wired network power or an alternative power arrangement is required.

Fanvil i507W: Consider this Android indoor station for requirements that justify its feature profile. Verify software version, approved integrations, camera preview behavior and management procedures before deployment.

Fanvil i554/i554W and newer i56-series variants: These are additional options in Fanvil’s current catalog. Use a formal comparison of screen, operating system, interfaces, power, mounting and vendor-supported functionality to determine fit. Older i51W, i52W and i53W models appear on Fanvil’s end-of-life list and should not be specified for new projects without a deliberate lifecycle review.

N. Why Enterprises Choose FourTeck for Procurement

Enterprise buyers need a procurement process that distinguishes confirmed product facts from assumptions. FourTeck can be approached with a model-specific request and supporting technical requirements so the resulting quotation discussion addresses the real project rather than only a product family name. The buyer should request a written statement of the supplied part numbers, accessories, commercial terms and service responsibilities.

For apartment projects, the most useful pre-sales information is often a compatibility matrix. It should show which door stations, SIP systems and controllers are in scope, what workflows must be demonstrated and what remains outside the vendor’s standard functionality. Buyers can ask FourTeck to coordinate product documentation and sourcing questions; any detailed engineering, commissioning or integration work should be contracted explicitly.

Delivery planning is equally important. A tower may need several shipment batches to match construction phases, while a replacement project may require only a small quantity of matching units. State the preferred delivery schedule, acceptance process and required documentation at quotation stage. Current availability, shipment method and estimated arrival should be confirmed rather than assumed.

After-sales expectations should also be documented. Ask who handles initial fault triage, what warranty exclusions apply and how replacements are processed. Record firmware versions and installation conditions to simplify future support. A disciplined procurement file protects the building owner, integrator and residents by clarifying responsibilities before handover.

O. Frequently Asked Questions

1. What is a Fanvil apartment indoor station?

It is a resident-side communication endpoint used with compatible entrance intercom equipment. Depending on the selected model and system, it can support audio/video visitor calls, call handling and authorized door-release requests. It is not a standalone building security system. A complete installation also requires suitable entrance devices, networking, power and access-control configuration.

2. Can one indoor station work with every Fanvil door phone?

Do not assume universal compatibility. Although many Fanvil devices use SIP-based communication, supported video formats, unlocking commands, provisioning methods and special functions can differ. Check the manufacturer’s compatibility information for the exact models and firmware, then test the intended call and access workflows before placing a large order.

3. Do all Fanvil indoor stations include Wi-Fi?

No. Wireless capability is model dependent and may be indicated by a particular variant designation. Review the exact datasheet and verify the supported bands, authentication options and power arrangement. For dense residential buildings, wired Ethernet may provide a more predictable communications path, while wireless deployment requires coverage and interference testing.

4. Is a touchscreen included as standard?

Fanvil offers indoor stations with different interfaces, including touchscreen models. The display size, resolution and touch functionality should be confirmed for the quoted part number. Choose the interface according to resident accessibility, expected video use and the building’s operating procedures rather than assuming that the largest screen provides the best overall fit.

5. Can residents unlock the building entrance?

Supported systems can provide a door-release action from the indoor station, but successful and secure operation depends on compatible entrance hardware and correctly configured access-control logic. The door controller should enforce the intended permissions. The integrator must test authorized and unauthorized scenarios and ensure emergency egress remains consistent with applicable building requirements.

6. Can an indoor station display CCTV cameras?

Selected Fanvil indoor stations support compatible camera preview or monitoring functions. Camera access is not guaranteed for every brand, protocol, codec or stream profile. Verify the chosen camera, firmware and authentication method, then test actual image quality and switching behavior. Separate surveillance recording or video management functions may require additional equipment.

7. How should a high-rise project be sized?

Start with apartment count, entrance count, simultaneous call expectations, network topology and the SIP or intercom management platform. Calculate switch ports, power budgets and uplink capacity, then reserve headroom for future phases. The indoor station’s presence alone does not establish the maximum building capacity. Pilot testing should validate representative call loads.

8. Are alarm sensors supported?

Some Fanvil indoor station models provide alarm input interfaces, but the number and supported behavior vary. Check the exact datasheet and wiring requirements. A general alarm input is not evidence of certification for fire or life-safety use. Any connection to critical alarms must be assessed by appropriately qualified professionals within the approved building design.

9. Can FourTeck supply indoor stations outside Dubai?

FourTeck accepts procurement inquiries for UAE and regional projects, with sourcing and delivery feasibility to be confirmed individually. Provide the destination country, city, required model, quantity and project timeline. Cross-border shipments may involve additional import documents, local approvals, duties and warranty conditions that should be agreed before ordering.

10. What information is needed for a quotation?

Send the preferred Fanvil model or required features, quantity, destination, deployment date and details of the existing or proposed entrance system. Include requirements for Wi-Fi, screen size, camera preview, alarm inputs and mounting accessories. Ask for written confirmation of included items, lead time, warranty and any separately priced installation or integration services.

P. Request a Project Quotation

Share your selected model or project requirements, indoor station quantity, building location, entrance hardware details and preferred deployment date. FourTeck can review the commercial inquiry and coordinate the next procurement steps subject to confirmation.

Contact FourTeck for a Quote