Quick Procurement & Configuration Matrix

Executive Product Architectural Overview

Tank measurement in hydrocarbon and chemical operations sounds simple until the operating constraints are considered. The technician may be standing on a vessel deck or terminal platform, the tank can contain volatile product, vapour release must be controlled, the reading may influence inventory or custody-transfer decisions, and the measured values must be repeatable enough to compare with fixed tank-gauging systems. The HERMetic UTImeter Gtex addresses this operating reality by combining three routinely required observations—ullage, liquid temperature, and oil-water interface detection—within a portable instrument intended for closed gas-tight operation. Rather than treating each measurement as an unrelated task, the unit gives a field operator one controlled measurement path through an appropriate vapour-control valve and adaptor.

In practical terms, ullage is the distance from the reference point to the liquid surface. Accurate ullage measurement is fundamental to calculating or validating tank contents. The Gtex provides audible and visible selectable indication when the sensing probe reaches the liquid surface, while the graduated tape provides the dimensional reference. Honeywell specifies ullage/interface detection accuracy of ±2 mm and tape accuracy of ±1.5 mm per 30 m. Those figures matter because field verification is often used to challenge, confirm, or diagnose an automatic tank gauging value. A portable reference device is most useful when its measurement method, tape condition, calibration status, reference height procedure, and operator technique are all controlled.

Temperature is equally important because liquid density and volume calculations are temperature sensitive. The UTImeter Gtex incorporates a temperature sensor with a stated measurement range from -40°C to 90°C, selectable Celsius or Fahrenheit display, and selectable 0.01° or 0.1° resolution. Honeywell states temperature accuracy of ±0.1°C from 0°C to 70°C and ±0.2°F from 32°F to 158°F. For cargo-control teams this enables a portable temperature check at selected immersion depths. It does not eliminate the need to follow the vessel, terminal, surveyor, API, ISO, or company measurement procedure; instead it provides the field instrument required to execute that procedure in a controlled closed-gauging workflow.

The third capability—oil-water interface detection—is operationally significant wherever free water may collect at the bottom of a hydrocarbon tank. Interface identification supports water-bottom checks, cargo quality control, inventory reconciliation, tank stripping decisions, and troubleshooting where unexpected water ingress or separation is suspected. The probe differentiates the liquid condition and gives the operator an indication, allowing the tape reading to be correlated with the interface level. This is particularly valuable because free water can distort inventory calculations and can carry quality, corrosion, handling, and custody implications.

The architectural value of the Gtex therefore lies less in a single headline feature and more in workflow consolidation. Marine and terminal teams can standardize on one portable gauging platform for several related checks, reducing the number of instruments carried to the tank and simplifying training, spares, battery management, storage, cleaning, and maintenance routines. The unit includes an eight-character backlit LCD, approved 9 V battery operation, tape cleaning provisions, a window wiper, modular construction, and interchangeable adaptors. Different product conditions can require different variants: the standard Gtex uses FKM gaskets for key hydrocarbon applications, the Gtex Chem is intended for corrosive liquids with FFKM gaskets and a tape connector, while Gtex Visc / Gtex Chem Visc configurations add load at the sensing probe for higher-viscosity products. This is why procurement should start from the cargo, valve and procedure rather than from a generic part description.

For organizations operating in Dubai and across the UAE, the instrument fits environments where ships, terminals, petrochemical assets, tank farms, bunkering operations, independent inspection companies, fuel distributors, and industrial storage sites need portable reference measurements while limiting vapour exposure. Its hazardous-location certifications and references to API, ISO, IMO, SOLAS, MARPOL and OCIMF-related requirements make it particularly relevant to regulated marine workflows. FourTeck’s role in the procurement chain is to help the buyer translate the field requirement into the correct commercial configuration: tape length, metric or English graduation, chemical compatibility, probe load, adaptor arrangement, accessories, quantity, documentation requirements and delivery location should all be resolved before the purchase order is finalized.

Enterprise Business Value & Operational Benefits

Return on investment for a portable gauging instrument should not be measured only by purchase price. Buyers should account for the cost of measurement delays, additional instruments, training complexity, unsuitable wetted materials, inaccurate tank references, unplanned service, and carrying the wrong adaptor to a vessel or terminal. A properly specified Gtex can reduce these sources of friction by consolidating measurement tasks and standardizing the portable workflow. The strongest commercial case normally appears where several tanks, vessels or terminals must follow repeatable manual verification routines and where instrument downtime has an immediate impact on loading, discharge, survey, calibration or inventory activities.

Reliability also depends on governance. A portable gauge that is physically capable but poorly controlled can still produce questionable data. Enterprises should therefore combine procurement with an instrument register, serial-number tracking, calibration or verification schedule, battery control, pre-use inspection checklist, tape cleanliness inspection, probe inspection, grounding check, and defined post-use cleaning procedure. If the device is used across chemically different products, compatibility and decontamination rules become especially important. These controls convert the equipment from an isolated tool into a dependable measurement asset.

From a continuity perspective, standardizing a fleet around compatible instruments and adaptors can simplify spare planning and operator competency. Teams can hold approved battery stock, cleaning materials, selected adaptors and replacement items without maintaining unrelated tool families. For multi-vessel operators, marine service companies and terminal groups, this can improve technician interchangeability. However, configurations should not be mixed casually: chemical service, gasket material, probe weight and connection hardware must remain matched to the approved application. FourTeck can help document the requested configuration within the quotation so purchasing, operations and HSE teams are aligned before supply.

Hardware & Technical Architecture Highlights

The HERMetic UTImeter Gtex architecture can be understood as five cooperating elements: the tank connection and vapour-control interface, the measuring tape and winding mechanism, the sensing probe, the electronic display/indication system, and the enclosure/maintenance features that make the assembly practical for field work. The tank connection is critical because closed gauging depends on a suitable valve and adaptor relationship. Honeywell supports interchangeable adaptors, allowing the portable gauge to be fitted to different vapour-control arrangements. Procurement teams should not assume that every existing valve accepts the same adaptor; identifying the valve manufacturer, nominal connection and installed arrangement before quotation helps prevent a technically correct gauge arriving with the wrong mechanical interface.

The tape provides both mechanical suspension and the dimensional reference used for ullage or interface readings. The referenced Gtex platform is offered with 15 m, 30 m and 35 m tape lengths, with metric or English graduation. Tape resolution is 1 mm or 1/16 inch, and the stated tape accuracy is ±1.5 mm over 30 m. Because the tape itself is part of the measurement chain, its condition matters. Kinks, contamination, deposits, abrasion, incorrect cleaning or physical damage can undermine measurement confidence. The integrated tape-cleaning concept is therefore more than a convenience feature; it supports repeatable handling and helps limit cargo carryover during retrieval, although formal cleaning and decontamination procedures may still be required.

At the lower end, the sensing probe detects the liquid surface and oil-water interface while incorporating temperature sensing. The standard Gtex configuration uses a one-inch sensing probe and FKM gaskets for key hydrocarbon duties. The Chem version uses FFKM gaskets and a tape connector for corrosive-liquid applications. Visc and Chem Visc versions add a two-inch load on the sensing probe to improve behaviour in high-viscosity products. These distinctions should drive purchasing decisions because wetted-material compatibility and probe descent characteristics directly affect usability and service life. A buyer handling mixed cargoes should map each intended product family against the manufacturer’s compatibility guidance rather than assuming a chemical variant is automatically universal.

Electronics are intentionally simple for field operation. Honeywell specifies an eight-character backlit LCD with continuous temperature reading capability. Temperature can be displayed in Celsius or Fahrenheit and with selectable resolution of 0.01 or 0.1 degree. Liquid and interface detection can use audible and visible indication. Power is supplied by approved 9 V batteries, supporting rapid field replacement without a dedicated charger workflow. In a hazardous-area instrument, however, “9 V battery” does not mean any battery should be used; operators should follow the approved battery requirements stated in the current manual and certification documentation.

Environmental and pressure limitations are equally important. The sensor measurement range is stated as -40°C to 90°C, while the instrument ambient operating range is stated as -20°C to 50°C. Maximum tank overpressure for the referenced Gtex is 0.3 bar / 4.4 psi. These figures are specification boundaries, not targets. Users must also account for cargo temperature, deck temperature, direct sunlight, cleaning chemicals, static-control practices and the certification conditions shown on the instrument. When a project approaches the edge of any limit, the configuration should be reviewed before purchase and again within the operating risk assessment.

Definitive Technical Specifications & Sizing Notes

Sizing a portable tank gauge is mostly about fit, not computational capacity. Start with maximum tank reference depth and choose a tape length that reaches the required measurement point with adequate operating margin. Then confirm whether the site works in metric or English graduation, identify the installed vapour-control valve and adaptor requirement, and document the cargo families the instrument will contact. Hydrocarbon service may suit the standard FKM-gasket configuration, while corrosive liquids can require the Chem variant with FFKM gaskets. High-viscosity products may justify a Visc configuration with additional probe load.

For UAE projects, environmental planning deserves explicit attention. The stated ambient range extends to 50°C, but exposed metal surfaces and deck environments can become hotter than ambient air under direct sun. The operating team should therefore assess storage, staging and measurement timing, and must not treat the data-sheet limit as permission to expose the instrument to uncontrolled heat. Similarly, the maximum tank overpressure of 0.3 bar is a product limit that must be compared with the actual measurement point. Where any parameter is uncertain, the correct action is configuration review before ordering and procedure validation before use.

Configuration, Sizing & Deployment Workbench

Unlike servers or network appliances, a UTImeter does not need CPU, memory, storage-throughput, port-density or software-license sizing. The equivalent sizing questions are mechanical reach, measurement accuracy, wetted-material compatibility, hazardous-area approval, tank pressure, environmental limits and operational governance. When preparing an RFQ, buyers should therefore avoid generic enterprise-hardware templates and provide the field parameters that actually decide fit. FourTeck can convert those inputs into a configuration-oriented quotation for the Dubai or regional project.

Industry Use Cases & Workload Scenarios

The instrument can also support training and competency programs where operators must learn the relationship between manual gauging, fixed instrumentation and tank reference data. A training unit should mirror the production configuration as closely as possible so that adaptor handling, tape management, indication behaviour, cleaning and safe-use steps translate directly into real operations. Where a business serves multiple industries, keeping separate clearly identified configurations for hydrocarbon and chemical service can reduce the risk of cross-use.

Technical Feature Deep Dive 1: Measurement Performance Architecture

The UTImeter Gtex measurement chain begins with a physical reference point. For ullage, the operator lowers the probe until the liquid surface is detected and then reads the tape against the defined reference. Honeywell states ±2 mm detection accuracy, while the tape itself is specified to ±1.5 mm over 30 m. These values should not be casually added or treated as a complete field uncertainty statement because total measurement uncertainty includes reference-point definition, tank movement, wave action, tape alignment, operator reading, thermal effects, cleanliness, calibration status and procedure. For operational decisions, enterprises should use the uncertainty method defined by their measurement standard or quality system.

The selectable audible and visible indication is operationally useful in noisy or visually demanding environments. A deck may have machinery noise, radio traffic, PPE restrictions, rain or low light; alternatively, audible indication may be undesirable in some procedures. Providing both modes allows the operator to follow the approved work method. The backlit display further supports readability for temperature verification, while the eight-character format keeps the interface deliberately simple. There are no complex menus intended to turn the device into a data historian; it is fundamentally a direct portable measurement tool.

Temperature measurement introduces another layer of procedural discipline. The sensor can measure from -40°C to 90°C, but the stated high-accuracy band is ±0.1°C between 0°C and 70°C. When performing cargo temperature work, the probe normally must be held at the specified depth long enough for the reading to stabilize, and the location of the temperature measurement should correspond to the governing procedure. Because the Gtex provides continuous temperature reading, the operator can observe stabilization rather than relying on a single instantaneous value. Again, the product enables the measurement but the approved method determines how that measurement becomes reportable data.

Interface detection uses the probe to identify the boundary associated with oil and water, helping establish free-water depth. This is a different measurement objective from liquid surface detection even though both use the same portable assembly. Free water can materially affect tank quantity calculations and can indicate operational issues. A field team should therefore define whether the requirement is a routine water-bottom check, a discrepancy investigation, stripping confirmation or a quality-control activity. The necessary documentation and measurement frequency may differ. By combining both detection modes, the Gtex helps the operator transition between surface and interface work without changing to a separate instrument.

Tape length selection directly affects field usability. A 15 m unit may be ideal for smaller tanks because it reduces unnecessary tape handling, while deeper tanks can require 30 m or 35 m. Buyers should avoid choosing the longest tape simply because it appears more flexible. Longer tapes can take more time to deploy, retrieve and clean; they also add unnecessary material if the fleet never needs the extra reach. A configuration matrix by vessel class, terminal tank or service route is a better procurement method. FourTeck can quote multiple lengths if a fleet has distinctly different tank groups.

Technical Feature Deep Dive 2: Safety, Redundancy & System Resilience

Portable gauging equipment operates at the boundary between measurement engineering and hazardous-area safety. The Gtex’s intrinsic-safety approvals are therefore central to its design. The referenced model carries ATEX II 1 G Ex ia IIB T4, FM Class I Division 1 Groups C and D T4 / Class I Zone 0 AEx ia IIB T4, and IECEx Zone 0 Ex ia IIB T4 markings in the manufacturer data. These approvals indicate suitability within defined hazardous-location conditions, but users must verify the exact certificate and marking of the supplied unit against the gas group, zone/division classification and site rules. Certification is not a substitute for safe operating procedures.

Gas-tight closed operation is intended to reduce product vapour release compared with open manual gauging. The practical safety chain includes the tank valve, adaptor, gauge body, seals, grounding and user procedure. An incompatible or damaged adaptor can undermine the purpose of the closed system even when the electronic instrument itself is correct. Buyers should therefore include connection details in the procurement review and ensure operators inspect seals and interfaces before use. Any leakage, mechanical damage or questionable condition should trigger removal from service under the organization’s maintenance rules.

Resilience also comes from mechanical simplicity and modular serviceability. Honeywell highlights easy battery exchange, tape cleaning, a window wiper, modular design and interchangeable adaptors. These features help field teams restore readiness without replacing the complete instrument for every consumable or routine issue. The benefit increases when a business owns several units and carries a controlled spare strategy. A sensible spare package may include approved batteries and selected service items, while specialized repairs should follow Honeywell-authorized procedures. Procurement documents should distinguish user-replaceable items from components that require qualified service.

Power resilience is straightforward but still requires control. The instrument uses approved 9 V batteries, avoiding dependence on proprietary charging stations. For vessels or remote terminal sites, this can simplify logistics. However, hazardous-area certification can depend on the battery type, so procurement teams should identify approved batteries and prevent uncontrolled substitution. A battery register or approved-stock list is a simple way to stop field personnel from fitting a convenient but non-approved cell.

Environmental resilience requires attention in the Gulf climate. Honeywell states an ambient operating range up to 50°C. In Dubai, Abu Dhabi, Fujairah or other UAE locations, direct solar heating can cause equipment surfaces and enclosed storage spaces to exceed the surrounding air temperature. Operators should plan shaded storage, protect the instrument from unnecessary deck exposure and follow the manufacturer’s limits. Similar care applies after measurement: residues should be removed using approved cleaning methods so that gaskets, tape markings and probe components are not degraded by aggressive cleaning agents.

Technical Feature Deep Dive 3: Field Management, Telemetry & Infrastructure Integration

The HERMetic UTImeter Gtex is not a networked telemetry device in the modern IT sense. It does not need an Ethernet address, wireless onboarding, cloud account or software subscription. That simplicity is an advantage for hazardous-area field measurement because the operator receives the result directly at the instrument. Integration therefore occurs through procedures and records rather than APIs. The technician observes the ullage, interface or temperature value and enters it into the vessel log, survey sheet, terminal system, calibration record or maintenance workflow defined by the organization.

For digitalized operations, enterprises can still integrate the Gtex into broader asset-management practices. The gauge can be assigned an asset ID or barcode, linked to a serial number, calibration/verification status and service history, and managed through an EAM or CMMS platform. Pre-use inspection forms can be digitized on intrinsically safe mobile devices where permitted. The measured values can then be entered into cargo or inventory systems using controlled data-entry fields. This approach provides governance without modifying the certified portable instrument or introducing unnecessary connectivity into the hazardous zone.

Telemetry in this context is best understood as the relationship between the portable reference reading and fixed automatic tank gauging. When a fixed radar, servo or other tank gauge reports an unexpected value, the Gtex can provide an independent manual comparison if the tank arrangement and procedure allow it. The two systems do not communicate electronically; the human and procedural workflow performs the comparison. If the difference exceeds the organization’s acceptance criterion, technicians can investigate reference heights, instrument calibration, product conditions, water bottoms, tank movement or faults in the fixed system.

This independent-reference role is valuable because it separates measurement technologies. A portable tape-and-probe system does not share the same sensing chain as a fixed level transmitter, so agreement provides useful confidence and disagreement provides diagnostic evidence. The portable instrument can also be used after maintenance or during commissioning to help validate fixed gauging performance. The governing standard and asset procedure should define the required number of readings, stabilization method and acceptance tolerance.

From an infrastructure-planning perspective, the absence of software licensing reduces lifecycle complexity. There are no subscription renewals or server dependencies for basic operation. The lifecycle focus shifts to physical service: tape condition, probe condition, seal compatibility, battery approval, certification, calibration/verification and adaptor readiness. Buyers accustomed to IT procurement should recognize this difference and place budget into the correct areas. FourTeck can support the supply conversation by documenting requested accessories and configuration in the commercial quotation rather than presenting the instrument as a generic boxed electronic device.

What Buyers Should Check Before Purchase

A technically complete RFQ protects both the buyer and the supplier. It gives operations a chance to validate the actual field requirement, gives HSE personnel a clear basis to review hazardous-area suitability, and gives procurement a like-for-like configuration for commercial comparison. If some information is not known, FourTeck can still start the quotation discussion, but unknown items should remain explicitly open rather than being silently assumed.

UAE Regional Availability & Service Ecosystem

FourTeck supports UAE buyers by coordinating technical requirement capture, configuration validation, quotation and delivery planning for marine and industrial instrumentation projects. Availability, lead time, accessories and warranty route can vary by requested configuration, so the supply process should begin with a clear operating profile rather than a request for an unspecified “UTImeter.” For urgent projects, include the required-on-site date, vessel or terminal location, quantity and whether documentation must be submitted before delivery.

K1. Dubai Supply & Logistics Support

Dubai buyers can request quotation support for shipping companies, marine service providers, terminals, free-zone operators, fuel businesses, industrial plants and inspection organizations. FourTeck can coordinate delivery requirements across mainland and free-zone destinations, subject to access rules and commercial terms. Where the gauge is needed for a planned docking, cargo campaign or commissioning window, provide the schedule early so tape length, adaptor selection and accessory needs can be reviewed before shipment.

K2. Abu Dhabi & Al Ain Logistics Reach

For Abu Dhabi and Al Ain projects, FourTeck can support quotation coordination for government, energy, industrial, terminal and corporate procurement. Buyers should state whether the instrument is intended for marine use, shore tanks or mixed service, and should include any approved-vendor, documentation, inspection or delivery-access requirements that affect the supply package.

K3. Sharjah & Northern Emirates Logistics Infrastructure

Sharjah, Ras Al Khaimah, Fujairah and Umm Al Quwain customers can use FourTeck for sourcing and delivery coordination across port, marine, storage, manufacturing and logistics environments. Fujairah-area requirements can be particularly time sensitive for bunkering and marine operations, so buyers should identify the vessel/terminal context and required date during the initial request.

K4. Ajman & Surrounding Emirates Logistics Coverage

Ajman organizations can request product availability verification, delivery coordination and pre-sales configuration guidance. For smaller operators that do not maintain an internal instrumentation engineering team, providing tank depth, cargo type and valve details gives FourTeck enough context to reduce ambiguity and route the inquiry toward the appropriate Gtex variant and accessories.

GCC & Pan-African Supply Chain Reach

FourTeck can coordinate regional export inquiries for enterprise and industrial equipment where cross-border documentation, freight planning and project schedules require centralized procurement. Export availability depends on product configuration, destination requirements, manufacturer channel terms and applicable trade controls. Buyers should provide destination country, consignee details, quantity and preferred shipping basis when requesting a quote.

L1. Saudi Arabia (KSA) Export & Supply Support

Saudi Arabian marine, energy, terminal and industrial projects can route inquiries through FourTeck for configuration review and project quotation. Include hazardous-area requirements, cargo conditions and delivery city so the supply path can be assessed accurately.

L2. Qatar Market Supply Reach

Qatar buyers can request cross-border sourcing and logistics coordination for terminal, shipping and industrial applications. Project documentation and site-access requirements should be identified before dispatch to avoid delays at the commissioning stage.

L3. Oman Regional Distribution Support

Oman procurement teams can request supply support for ports, refineries, storage terminals, shipping operations and industrial tank systems. Specifying the operating location and tank connection type helps ensure the portable gauge is ordered with the correct practical interface.

L4. Kuwait Supply Chain Coverage

FourTeck supports Kuwait project inquiries with configuration validation, quotation and export coordination. For local procurement routing and regional commercial engagement, visit FourTeck Kuwait.

L5. Kenya & East Africa Supply Infrastructure

Kenyan system integrators, industrial operators, marine organizations and logistics businesses can request technical inquiry routing and delivery coordination through FourTeck Kenya. Cross-border projects should specify final destination and documentation needs.

L6. Uganda Regional Procurement Support

Uganda buyers can request project supply management and technology sourcing support through FourTeck Uganda. For instrumentation projects, provide application, quantity, required certificates and delivery target.

L7. Pan-African Regional Logistics & Trade Reach

For multi-country African projects, FourTeck can coordinate centralized sourcing and export planning through FourTeck Africa and FourTeck Global. Regional projects benefit from one consolidated specification sheet so each destination receives the intended tape length, seals, adaptor and documentation package.

Related FourTeck Products & Compatible Alternatives

The best alternative is determined by operating environment rather than by model hierarchy. A standard Gtex is appropriate when hydrocarbon cargo compatibility and the referenced marine closed-gauging configuration meet the requirement. Gtex Chem becomes relevant when corrosive-liquid compatibility drives seal selection. Visc versions are valuable where product viscosity can make an unweighted probe difficult to lower consistently. The N Series should be considered when a project specifically calls for its newer hazardous-area approval set or tape-length range, while Gtex 2000 is positioned for land applications. FourTeck can quote the appropriate family member after reviewing the application.

Why Enterprises Choose FourTeck

Industrial instrumentation procurement works best when the supplier captures the engineering context instead of forwarding a one-line model request. FourTeck supports buyers by translating application information into a structured quotation request that can include variant, tape length, graduation, adaptor, quantity, documentation and delivery requirements. This reduces the risk that purchasing receives several superficially similar offers that are not actually comparable.

FourTeck also supports logistics coordination across Dubai, the wider UAE and selected export markets. Lead time is confirmed against the requested configuration rather than assumed. Where a project has a fixed commissioning, docking or cargo date, the timeline can be included in the commercial review. Buyers can also request warranty and service-route details as part of the quotation so lifecycle expectations are visible before order placement.

For technical teams, the benefit is access to a procurement partner that understands why tape length, chemical compatibility, hazardous-area marking and tank connection matter. For procurement teams, the benefit is a cleaner bill of requirements and fewer unresolved field assumptions. For management, this improves purchase traceability and reduces the chance that an instrument arrives on site but cannot be used in the intended service.

Frequently Asked Questions

1. What does the Honeywell HERMetic UTImeter Gtex measure?

The UTImeter Gtex combines three portable tank measurements: ullage level, product temperature and oil-water interface level. Honeywell positions it for closed gas-tight gauging of hydrocarbons and compatible chemicals on marine vessels and shore tanks. The combined design lets an operator carry out related cargo-control or verification tasks with one instrument, subject to the correct variant, adaptor and operating procedure.

2. What is the ullage and interface accuracy?

Honeywell states ±2 mm, approximately ±0.08 inch, for ullage and interface detection. The measuring tape is separately specified at ±1.5 mm over 30 m, with 1 mm or 1/16 inch resolution. Field measurement quality also depends on reference-point control, tape condition, tank movement and operator procedure, so the data-sheet figure should not be treated as the complete uncertainty of every field reading.

3. What tape lengths are available for the standard Gtex?

The referenced HERMetic UTImeter Gtex is offered with 15 m, 30 m and 35 m tape lengths, corresponding approximately to 50 ft, 100 ft and 115 ft. Metric or English graduation can be selected. The correct length should be based on the deepest intended tank measurement plus operating margin rather than automatically selecting the longest tape.

4. Can the Gtex be used for chemicals?

Yes, but the exact variant matters. Honeywell identifies a Gtex Chem version with FFKM gaskets and a tape connector for corrosive-liquid applications, while the standard Gtex uses FKM gaskets for key hydrocarbon duties. Buyers should provide the actual product or chemical list so wetted-material compatibility can be reviewed. Chemical compatibility should never be assumed from the word “Chem” alone.

5. Is there a version for high-viscosity products?

Honeywell offers Gtex Visc and Gtex Chem Visc configurations with added load on the sensing probe, intended to improve use in higher-viscosity products. The Visc choice should be based on the actual cargo and operating experience. If a fleet handles both ordinary hydrocarbons and viscous products, the procurement team can ask FourTeck whether separate dedicated configurations are more practical.

6. What hazardous-area approvals does the Gtex have?

Manufacturer data for the referenced Gtex lists ATEX II 1 G Ex ia IIB T4, Factory Mutual Class I Division 1 Groups C and D T4 / Class I Zone 0 AEx ia IIB T4, and IECEx Zone 0 Ex ia IIB T4. Always verify the exact approval and marking on the configuration being quoted, especially if the site requires a particular gas group or regional certification.

7. What is the temperature measurement capability?

The sensor measurement range is -40°C to 90°C, or -40°F to 194°F. Honeywell states temperature accuracy of ±0.1°C from 0°C to 70°C and ±0.2°F from 32°F to 158°F. The display can show Celsius or Fahrenheit, with selectable resolution of 0.01 or 0.1 degree. Field procedure should define immersion depth and stabilization requirements.

8. What is the maximum tank pressure for use?

The referenced UTImeter Gtex data states a maximum tank overpressure of 0.3 bar, approximately 4.4 psi. Buyers must compare this with the actual pressure at the intended gauging point and follow vessel or terminal safety procedures. If tank pressure can exceed the product limit or is uncertain, the application should be reviewed before purchasing or using the instrument.

9. What information should I send FourTeck for a quotation?

Provide the preferred Gtex variant if known, required tape length, metric or English graduation, cargo or chemical type, tank valve/adaptor details, quantity, delivery location, required date and any certificate or documentation needs. If the adaptor is uncertain, include the installed valve reference or supporting photographs where permitted. This helps avoid a quotation that is commercially complete but mechanically unsuitable.

10. Is the HERMetic UTImeter Gtex available for Dubai and UAE delivery?

FourTeck can coordinate quotation and supply inquiries for Dubai and other UAE locations. Current availability, lead time, included accessories, warranty terms and delivery schedule depend on the exact requested configuration and project conditions. Contact FourTeck with the operational requirement and target date so the commercial offer can be matched to the intended marine, terminal or industrial application.

Request a Honeywell HERMetic UTImeter Gtex Quote

For a configuration-ready quotation, send FourTeck the required model or variant, tape length, graduation preference, quantity, cargo or chemical service, tank valve/adaptor information, delivery location and deployment timeframe. Include any required certificates, inspection documents or project references. The clearer the field requirement, the faster the configuration can be validated for commercial quotation.

Contact FourTeck