Hanwha Vision SBP-300WM1 Wall Mount in Dubai, UAE
The Hanwha Vision SBP-300WM1 is a dedicated wall-mounting accessory for supported PTZ, dome and related surveillance camera assemblies, providing a rigid vertical-surface mounting point for professional CCTV projects. It uses an ivory aluminum body, a PF 1½-inch mounting interface and a compact projection that helps position compatible cameras clear of the mounting wall for practical viewing geometry.
For security integrators and enterprise facilities teams in Dubai, the bracket offers a manufacturer-aligned path for building camera assemblies when the exact camera, hanging adaptor and substrate are validated before installation.
Procurement Snapshot
Brand: Hanwha Vision
Model: SBP-300WM1
Category: CCTV wall mount
Finish: Ivory
Material: Aluminum
Project note: Confirm camera and hanging-adaptor compatibility before ordering.
Quick Procurement & Configuration Matrix
Hanwha Vision SBP-300WM1
Wall mount for supported surveillance camera mounting assemblies.
Fixed wall installation of compatible PTZ, dome and multi-sensor camera assemblies.
Maximum documented load: 10 kg.
Passive mounting accessory; camera power is determined by the selected camera system.
Dubai, UAE and project-based regional supply.
Terms are supply-channel and project dependent; confirm on quotation.
Validate the exact camera, hanging adaptor and installation environment.
Executive Product Architectural Overview
The SBP-300WM1 is an infrastructure component rather than an active electronic device, but its role in a surveillance architecture is strategically important. Camera projects are frequently designed around sensor resolution, focal length, analytics, low-light performance and recording capacity, while the mechanical installation layer receives attention only near deployment. That sequence can create avoidable friction. A camera may be technically correct for a site but difficult to install safely if the mount, hanging adaptor, wall substrate, cable path and physical clearances are not considered as one assembly. The SBP-300WM1 addresses that mechanical layer by providing a purpose-built wall bracket designed to interface with selected Hanwha Vision mounting accessories and supported cameras.
The bracket extends the connection point away from the wall so the camera assembly can be positioned with practical clearance from a vertical structure. In real CCTV deployments this matters because the field of view is influenced not only by lens selection but also by the physical location of the camera relative to building edges, columns, soffits, façades, doorways, loading bays and perimeter walls. A suitable wall mount can reduce the risk of the camera body being crowded against architectural surfaces and can improve service access when the camera or adaptor requires inspection. The SBP-300WM1 therefore belongs to the structural path that connects the camera to the building, and it should be evaluated with the same discipline used for network and power components.
Current manufacturer documentation identifies an ivory aluminum construction, physical dimensions of approximately 112 mm wide by 183 mm high by 207.5 mm deep, a product weight of about 625 g, a maximum supported load of 10 kg and a PF 1½-inch mount screw size. The manufacturer also lists selected supported mounting products such as SBP-122HM, SBP-168HM and SBP-300HM7, while directing users to current compatibility resources for additional models. That distinction is important for procurement teams because camera accessory ecosystems evolve. A mount may remain mechanically available for years while camera families, housing combinations and hanging adaptors change. FourTeck therefore recommends treating compatibility as a project validation item rather than assuming that a matching brand alone guarantees fit.
For UAE deployments, the mechanical environment can include indoor commercial spaces, conditioned lobbies, external façades, shaded loading areas, warehouses, parking zones, hospitality properties and industrial facilities. Each environment changes the installation risk profile. The wall material might be reinforced concrete, blockwork, structural steel, cladding or another engineered surface. The appropriate anchors, cable protection method, sealants, junction arrangements and corrosion controls depend on that substrate and the exposure conditions. The SBP-300WM1 provides the camera-side mounting structure, but the wall fixing method must be engineered separately by the installer according to the building surface, load path and local project requirements.
From an enterprise systems perspective, the bracket fits into a broader surveillance stack that can include IP cameras, PoE switches, fiber uplinks, network segmentation, video management software, network video recorders, storage arrays, monitoring workstations and incident-response procedures. Although the SBP-300WM1 does not process video or carry network traffic, it supports system reliability by holding the imaging device in the intended physical position. Stable mechanical alignment is particularly relevant for PTZ applications where repeated pan, tilt and zoom movement can place dynamic stress on the mounting chain. The installed assembly should therefore be evaluated as a complete mechanical system: camera, hanging adaptor, wall mount, wall anchors, cable management and environmental protection.
For buyers in Dubai and across the UAE, the most efficient procurement process is to provide the exact Hanwha Vision camera model, the proposed mounting height, wall type, indoor or outdoor location, quantity, required cable route and any existing accessory part numbers. This allows FourTeck to help identify whether the SBP-300WM1 is the correct bracket or whether a different wall, pole, corner, parapet or ceiling accessory is more appropriate. That front-end validation reduces the chance of receiving a mechanically incompatible accessory and helps installation teams arrive on site with a coherent bill of materials.
Enterprise Business Value & ROI Benefits
Installation Consistency
Using a manufacturer-aligned mounting component helps standardize installation practices across repeated camera points. Standardization has operational value because technicians encounter the same bracket geometry, cable approach and accessory interface at multiple locations. That can reduce site-by-site improvisation and make documentation easier to maintain. For multi-branch retail, hospitality, education and logistics projects, repeatable mounting hardware also simplifies spares planning and future camera replacement activity.
Mechanical Reliability
A surveillance system is only as dependable as the physical structure holding the camera. The SBP-300WM1 is designed as a dedicated metal mounting component with a documented maximum load. When correctly matched to the camera assembly and fixed to an appropriate substrate, it contributes to stable positioning and reduces reliance on improvised brackets. That helps protect the investment in the camera and can reduce avoidable maintenance caused by unsuitable mounting methods.
Deployment Speed
Pre-validating the bracket, hanging adaptor and camera as a known combination can shorten installation decision-making on site. Technicians can focus on anchoring, alignment, cabling and commissioning rather than resolving accessory mismatches during the installation window. For projects with restricted access hours, lift rentals or night work, avoiding a return visit can have meaningful cost impact even though the bracket itself is a relatively small line item.
Lifecycle Serviceability
A clearly identified mounting part number supports better lifecycle records. Facilities teams can document which wall mount and hanging adaptor were installed at each camera point, improving troubleshooting and replacement planning. If a camera model is refreshed later, the existing mounting chain can be checked against the new model rather than rediscovered from scratch. That reduces uncertainty during phased modernization projects.
Compatibility Discipline
The most valuable procurement benefit comes from treating the mount as part of an engineered assembly. The PF 1½-inch interface and supported hanging adaptors create a defined compatibility path, but the final camera combination still requires confirmation. A disciplined selection process prevents the common mistake of ordering a wall bracket by appearance alone. FourTeck can help map the requested camera to the appropriate accessory chain before quotation.
Project Cost Control
Accessory errors can create costs that exceed the price of the hardware through transport, technician rescheduling, access equipment hire, project delays and site rework. Specifying the right mount during bill-of-material preparation helps reduce these indirect costs. For enterprise buyers, this is why mechanical accessories should be approved during design rather than left as a last-minute installation choice.
The business case for the SBP-300WM1 is therefore not based on processing performance or software functionality. Its value is linked to physical deployment quality, repeatability and risk reduction. A well-planned mounting architecture gives the camera the correct placement, protects the mounting chain from unnecessary improvisation and supports cleaner handover documentation. In a large security project with dozens or hundreds of camera points, small improvements in installation consistency can accumulate into measurable operational benefit.
Hardware & Technical Architecture Highlights
The SBP-300WM1 has a straightforward mechanical architecture, but each element has practical significance. The principal body is aluminum, selected for a useful balance of strength, weight and corrosion resistance compared with many basic ferrous brackets. The ivory finish is aligned with common surveillance camera color schemes and helps the bracket integrate visually with compatible housings in commercial and public-space installations. Because the mount itself contains no processor, electronics, memory or software, its engineering focus is entirely mechanical: load transfer, geometry, interface compatibility and mounting stability.
The documented envelope of approximately 112 × 183 × 207.5 mm provides a compact wall footprint while extending the hanging interface away from the surface. This projection is important in camera placement because a dome or PTZ housing requires clear space around its body and lens area. By moving the attachment point outward, the bracket can help the camera achieve a usable viewing position without excessive interference from the wall. The installer should still check lens sightlines, PTZ sweep area and nearby building elements before drilling.
The PF 1½-inch mounting thread is the critical connection point to the supported hanging adaptor or camera accessory. Threaded mounting interfaces provide a defined mechanical engagement, but installers must follow the accessory instructions and ensure the connection is fully seated and secured using the manufacturer-prescribed method. Compatibility is not determined by thread size alone. Load distribution, cable entry, enclosure geometry and approved adaptor combinations all matter, which is why the exact camera model and hanging adaptor should be validated together.
The stated maximum load of 10 kg is a design boundary for the mount itself, not a recommendation to build an assembly close to the limit without engineering review. The complete camera assembly weight should include the camera, housing where applicable, hanging adaptor and any directly supported accessories. The wall anchors and substrate must also be capable of carrying the static load plus an appropriate engineering safety margin. Outdoor or exposed installations can introduce additional forces from wind, vibration and maintenance activity. Those factors sit outside the bracket specification and require site-specific consideration.
Cable routing should be coordinated before mounting. Camera power and data may arrive through PoE Ethernet, dedicated DC or AC power depending on the selected camera, while some projects may also use fiber media converters, alarm I/O, audio or auxiliary wiring. The mount should be integrated into a weather-protected or indoor cable pathway that avoids sharp bends and unsupported cable strain. Where conduits, junction boxes or weather sealing are needed, the installer should design those elements around the wall material and local conditions rather than assuming the bracket alone provides a complete environmental enclosure.
Definitive Technical Specifications & Sizing Notes
| Parameter | Specification / Guidance |
|---|---|
| Manufacturer | Hanwha Vision |
| Model | SBP-300WM1 |
| Product Type | Wall mount for supported surveillance camera mounting assemblies |
| Color | Ivory |
| Material | Aluminum |
| Dimensions | Approximately 112 × 183 × 207.5 mm (W × H × D) |
| Product Weight | Approximately 625 g |
| Maximum Load | 10 kg |
| Mount Screw / Thread | PF 1½-inch |
| Documented Supported Accessories | Includes SBP-122HM, SBP-168HM and SBP-300HM7; additional compatibility should be verified for the current camera generation. |
| Power / Networking | None in the mount itself; requirements are determined by the attached camera. |
| Warranty | Supply-channel and project dependent; confirm with FourTeck quotation. |
Sizing a camera wall mount is not the same as choosing a bracket by maximum weight alone. Buyers should first identify the exact camera model, then determine whether a specific hanging adaptor is required between the camera and the SBP-300WM1. The assembled weight must remain within the documented mount limit, but the wall construction and anchor system also need independent validation. In concrete and masonry applications, anchor type and embedment depth can affect the real load capacity. In cladding or lightweight partitions, the installer may require structural backing rather than direct attachment to the visible surface.
Physical clearances should also be checked. Confirm that the projected camera position does not interfere with doors, shutters, signage, awnings, downpipes or lighting. For PTZ cameras, verify the full movement envelope and ensure that the wall does not create a large blind sector. Where environmental sealing is required, plan the cable path, glands and junction arrangement before mounting. Finally, treat the supported product list as a compatibility starting point rather than a permanent universal list. Camera and adaptor portfolios change over time, so FourTeck should be provided with the exact camera model for current matching.
Configuration, Sizing & Deployment Workbench
01 — Confirm the Camera and Accessory Chain
Start with the complete Hanwha Vision camera model, not only the camera family. Determine whether the camera attaches directly to a hanging adaptor and whether that adaptor is listed or currently supported for use with the SBP-300WM1. Manufacturer documentation specifically identifies several compatible hanging products, but additional models can be supported depending on the current product portfolio. Record every part number in the bill of materials so the installer receives a complete, traceable assembly.
02 — Calculate Mechanical Load Headroom
Add the weight of the camera, required housing if any, hanging adaptor and any directly supported accessory. Compare the total with the mount’s 10 kg maximum. Do not treat the maximum as a target. Practical engineering normally retains margin for installation tolerance and dynamic effects. The wall anchors, fasteners and structural substrate must be selected separately and may have different allowable loads. For exposed outdoor PTZ installations, consider wind and vibration loads in addition to static mass.
03 — Validate Viewing Geometry
Before drilling, model the camera position relative to the area of interest. A wall mount is typically chosen to move the camera away from the vertical plane and provide a cleaner view, but the exact benefit depends on lens direction, camera body size and the surrounding architecture. For fixed domes, check whether the wall creates an unwanted edge in the frame. For PTZ models, verify the pan and tilt movement envelope and identify any predictable blind sector created by the building surface.
04 — Engineer the Wall Fixing Method
The SBP-300WM1 is only one part of the load path. The installer must identify the wall substrate and choose anchors or bolts that are suitable for that material. Reinforced concrete, dense blockwork, structural steel and lightweight partitions require different fixing methods. Decorative façade panels may not be structural at all. For that reason, security integrators should obtain site information or conduct a survey before finalizing the installation method, particularly when cameras are positioned at height or above occupied areas.
05 — Plan Cable Routing and Environmental Protection
Map the Ethernet, fiber, power, alarm and auxiliary wiring required by the chosen camera. Establish whether the cables will enter from behind the bracket, through conduit, from a nearby junction box or through another protected route. Outdoor projects should include sealing details that prevent water ingress along the cable path. Where PoE is used, confirm switch power budget and cable distance. Where separate power is required, coordinate the electrical supply and isolation method with the project design.
06 — Define Quantity, Spares and Handover Records
For multi-camera deployments, separate installed quantity from recommended project spares. A small spare pool can be useful when sites are remote or maintenance windows are limited. During handover, record the mount model, camera model, adaptor model, wall location and any special fixing detail. These records shorten future maintenance because technicians can identify the installed accessory chain before visiting the site. FourTeck can help consolidate the requested quantities into a project quotation for Dubai and UAE delivery.
This workbench approach gives procurement, design and installation teams a shared decision sequence. The mount is selected only after camera compatibility, mechanical load, viewing position, wall structure and cable route have been considered together. That coordination is especially useful for enterprise rollouts where the same camera architecture may be repeated across multiple branches but each site has slightly different wall conditions.
Industry Use Cases & Workload Scenarios
Banking & Finance
Branches, ATM vestibules, operations centers and perimeter areas can require cameras mounted to rigid wall structures with predictable geometry. The SBP-300WM1 can form part of a standardized Hanwha Vision accessory chain where camera compatibility and security-zone coverage have been pre-engineered. The emphasis in financial sites is repeatability, tamper-aware positioning and clear maintenance documentation.
Healthcare
Hospitals, clinics and medical campuses often combine public entrances, corridors, service areas, loading zones and external boundaries. A dedicated wall mount helps position compatible cameras away from architectural obstructions while maintaining a clean installation appearance. Buyers should coordinate the mount location with infection-control requirements, patient privacy policies and facility access rules where relevant.
Government & Public Sector
Public-sector CCTV projects typically require precise bills of materials, formal technical submissions and clear model traceability. The SBP-300WM1 supports that process because it is a defined manufacturer part number with documented mechanical specifications. Compatibility should be validated against the approved camera schedule, and the final fixing method should be coordinated with the building’s structural requirements.
Logistics & Warehousing
Warehouses, distribution centers and loading yards benefit from camera positions that provide long, unobstructed views of dock doors, aisles, staging zones and perimeter traffic. Wall mounting can be useful where ceiling structures are high or where cameras need to look across broad areas. PTZ movement, vibration from industrial activity and exposure conditions should be considered during design.
Retail & Hospitality
Retail centers, hotels and restaurants need surveillance hardware that integrates visually with customer-facing spaces while preserving useful coverage. The ivory finish can align with common light-colored camera housings, and the controlled wall projection can help position the camera around columns or architectural edges. Final placement should balance aesthetics with evidential image quality and service access.
Education
Schools, universities and training campuses may deploy cameras at entrances, corridors, sports facilities, car parks and perimeter points. A standardized mounting approach improves consistency across large campuses and can simplify replacement work. Installations should be coordinated with safeguarding policies, privacy requirements and the institution’s approved network and recording architecture.
Technical Feature Deep Dive 1: Mechanical Throughput, Positioning & Workload Architecture
For an active device, throughput usually describes data processing capacity. For the SBP-300WM1, the more useful equivalent is the amount of mechanical workload the mount can carry while maintaining the intended camera position. The documented maximum load is 10 kg, which gives integrators a clear ceiling for the directly supported assembly. That figure should be interpreted within a broader mechanical design. A camera may weigh only a few kilograms, but a hanging adaptor, enclosure or specialized sensor package adds mass, and the offset from the wall creates leverage at the fixing points. The installer therefore needs to consider not only total weight but also how that weight acts through the bracket and the wall anchors.
The approximately 207.5 mm depth is a defining geometric characteristic. By projecting the connection point away from the wall, the bracket changes the camera’s relationship to the mounting surface. This can help reduce obstruction, improve the angle around a corner or façade and provide space for the hanging assembly. For PTZ cameras, projection can improve the usable pan sector compared with a camera body mounted too close to a wall. However, projection also increases the lever arm acting on the anchors. This is another reason the wall fixing method must be engineered for the actual substrate and not selected as a generic afterthought.
The PF 1½-inch interface acts as the standardized handoff from the wall bracket to the supported hanging accessory. In a properly documented assembly, this interface enables a modular installation path: building structure to wall mount, wall mount to hanging adaptor, hanging adaptor to camera. Modularity is useful because it separates the building-side fixing from camera-specific geometry. When a future camera replacement is considered, the integrator can evaluate whether the existing mount and adaptor remain compatible or whether only part of the assembly requires replacement.
For project planners, the performance objective is not to maximize load but to create stable headroom. A lightly loaded mount installed to a strong structural surface with appropriate anchors generally offers a more robust operating condition than an assembly designed close to the mechanical limit. Exterior deployments may also encounter wind loading, thermal cycling and vibration. These forces are influenced by camera housing shape, mounting height and exposure. They should be included in the site engineering process even though they are not expressed in the simple maximum-load figure.
Technical Feature Deep Dive 2: Security, Redundancy & System Resilience
Physical security systems depend on resilience at multiple layers: camera electronics, network transport, power delivery, recording, storage and the mechanical installation. The SBP-300WM1 sits at the final physical layer. A camera can have redundant recording and robust cybersecurity controls, yet a poor mounting method can still compromise coverage or create a maintenance risk. A dedicated bracket helps make the mechanical layer predictable, but resilience depends on correct installation rather than the bracket alone.
The aluminum body provides a rigid support structure with relatively low mass, while the documented mechanical limit helps system designers avoid uncontrolled loading. The final installation should include appropriate locking and fastening practices according to the camera and adaptor instructions. On exposed or high-risk sites, installers should also consider anti-tamper positioning, fastener access, conduit protection and whether the camera can be reached without controlled access equipment. The mount does not provide electronic tamper sensing by itself, so any tamper alarms must come from the camera or security platform.
Redundancy in this context is primarily procedural. Procurement teams can standardize compatible bracket and adaptor combinations, keep controlled spare quantities and document the exact accessory chain in the asset register. If a mount is damaged during building work or a camera point is relocated, a known spare can be issued without reopening the entire design process. For organizations operating many branches, this can reduce restoration time and support consistent installation quality across contractors.
Environmental resilience must be assessed for the complete assembly. The camera may carry its own ingress-protection and impact ratings, but those ratings do not automatically transfer to every junction, cable entry or wall penetration. Outdoor projects should use suitable glands, conduit, sealants and weather-protected routing. If the wall mount is attached to an external façade, the installer should prevent water from tracking through penetrations into the building structure. Coastal or industrial atmospheres may require additional material and maintenance review depending on exposure severity.
Technical Feature Deep Dive 3: Remote Management, Telemetry & Infrastructure Integration
The SBP-300WM1 itself has no network interface, management processor or telemetry capability, yet it directly influences the reliability of the devices that do. Modern Hanwha Vision cameras may connect to video management platforms, network video recorders, health-monitoring services and event-management systems. Those capabilities depend on the camera remaining correctly positioned and physically accessible for service. The wall mount therefore supports the management layer indirectly by providing the structural location from which the managed camera operates.
During design, the physical mounting point should be coordinated with network architecture. A PoE camera requires an Ethernet cable path that remains within link-distance limits and connects to a switch with adequate power budget. High-power PTZ cameras may use enhanced PoE classes or separate power depending on model. The mount selection should not block cable entry or create bend-radius problems. If fiber conversion equipment or a local junction box is required, that equipment should be located where technicians can service it without disturbing the camera alignment.
Telemetry becomes especially valuable in distributed environments. A monitoring platform may report camera offline status, storage faults, analytics events or scene-change alerts. If a camera has physically shifted because of an installation problem, scene-change detection can become an early indicator. A stable wall mounting arrangement reduces the chance that normal mechanical movement is mistaken for a change in the monitored scene. PTZ preset accuracy likewise benefits from a rigid structural base because presets assume the camera body remains fixed relative to the environment.
For system integration, document the camera’s physical location and mounting accessories in the same asset record used for IP address, switch port, recorder channel and software license. This creates a complete digital-to-physical inventory. When a technician receives an alert, they can see not only which camera is affected but also which bracket and adaptor are installed. FourTeck can support project quotations that keep these accessory relationships visible in the bill of materials, helping integrators avoid orphaned parts or incomplete mounting assemblies.
What Buyers Should Check Before Purchase
The main purchasing risk is not the bracket’s basic specification; it is ordering the mount without validating the complete camera, adaptor, wall structure and environmental context. Use the four checks below to turn the accessory into a controlled project item rather than an assumption.
01 / FIT — Configuration Fit & Model Sizing
Provide the exact camera model and any existing hanging adaptor part number. Confirm that the camera assembly is supported and that its total mass remains within the mount’s documented load limit. Do not assume that every Hanwha Vision camera uses the same hanging connection. Different camera generations can use different adaptors, and the correct accessory chain may vary by housing type.
02 / MATCH — Compatibility & Environmental Requirements
Check the wall construction, indoor or outdoor exposure, mounting height, cable route and required field of view. The bracket must be attached to a structure that can safely support the complete assembly. For external locations, include weather sealing and corrosion considerations in the installation design. For PTZ cameras, verify clear movement around the camera body.
03 / TERMS — Availability, Delivery & Warranty Terms
Accessory availability can vary by distribution channel and project timing. Request current lead time, supply status and warranty terms on the quotation rather than relying on historical listings. For multi-site projects, specify whether deliveries should be consolidated or released in phases. FourTeck can coordinate Dubai and wider UAE project delivery based on confirmed commercial terms.
04 / REQUEST — Quote Preparation Data Needed
Send the camera model, SBP-300WM1 quantity, hanging adaptor if already known, delivery emirate, required delivery date and project name. If the wall material or camera configuration is uncertain, share available drawings or a description of the installation. Clear input allows the sales and technical team to flag accessory gaps before the order is released.
Buyers should also confirm whether the project requires additional wall-mount bases, pole adaptors, corner adaptors, parapet mounts or ceiling alternatives at other camera points. Large CCTV projects rarely use one mounting method everywhere. Building elevations, internal ceilings, perimeter poles and loading structures can require different accessories even when the camera family is the same. A camera-by-camera mounting schedule is therefore more reliable than purchasing a single bracket type in bulk without site mapping.
UAE Regional Availability & Service Ecosystem
FourTeck supports project-based sourcing and quotation coordination for CCTV hardware and accessories across the UAE. For the SBP-300WM1, the useful pre-sales step is configuration validation: confirm the Hanwha Vision camera model, hanging accessory, project quantity and delivery location before commercial release. This helps align the bracket with the rest of the surveillance bill of materials and gives procurement teams a cleaner path from technical approval to delivery scheduling.
Dubai Supply & Logistics Support
Dubai projects can include corporate offices, hotels, retail centers, logistics facilities, Free Zone sites, data centers, schools and mixed-use developments. FourTeck can coordinate quotations and delivery planning for these environments, including staged project quantities where required. For integrators, providing the camera schedule at quotation stage helps reduce the risk of accessory mismatches. Delivery timing, stock position and warranty conditions should be confirmed on the current quote because project availability can change.
Abu Dhabi & Al Ain Logistics Reach
For Abu Dhabi and Al Ain, FourTeck can support sourcing and quotation coordination for government, industrial, energy, healthcare, education and corporate security projects. The technical review can include the intended Hanwha Vision camera model and mounting method so the SBP-300WM1 is supplied as part of a coherent installation set rather than as an isolated accessory. Project deliveries can be planned around approved quantities and site readiness.
Sharjah & Northern Emirates Logistics Infrastructure
Sharjah and the Northern Emirates include manufacturing, warehousing, hospitality, retail and education facilities with varied camera mounting conditions. FourTeck can assist with commercial quotation handling and delivery coordination while encouraging installers to validate wall substrate, camera compatibility and environmental conditions. For distributed sites, the bill of materials can be separated by location to make receiving and installation tracking easier.
Ajman & Surrounding Emirates Logistics Coverage
Businesses in Ajman can request availability verification, project quantity quotations and pre-sales accessory guidance. Where the camera model is already defined, FourTeck can help identify whether the SBP-300WM1 aligns with the required mounting chain. Where the camera is still being selected, the mounting requirement should be included early so that the final camera and accessory combination supports the intended wall location.
GCC & Pan-African Supply Chain Reach
FourTeck can coordinate regional project inquiries beyond the UAE for integrators, resellers and enterprise buyers requiring surveillance hardware and accessories. Cross-border supply depends on current export conditions, project quantities, destination requirements and commercial terms. Buyers should provide model, quantity, destination city, required date and any documentation needs so the quotation can reflect the actual route. Customs clearance and local regulatory obligations remain destination dependent.
Saudi Arabia (KSA) Export & Supply Support
Saudi projects can be supported through regional inquiry routing, configuration validation and project quotation coordination. For CCTV deployments, accessory matching is particularly important because large projects may combine indoor domes, outdoor PTZ cameras, poles, parapets and façade mounts. Supplying the exact camera schedule enables the mounting accessories to be checked as part of the wider bill of materials.
Qatar Market Supply Reach
FourTeck can assist Qatari buyers with project quotation and cross-border sourcing for Hanwha Vision surveillance accessories, subject to current supply and export conditions. Share the destination, camera model, bracket quantity and required delivery timeline so the request can be evaluated as a project rather than as an unspecified accessory inquiry.
Oman Regional Distribution Support
For Oman, FourTeck can coordinate procurement guidance and project quotes for CCTV equipment and compatible installation accessories. Wall-mount suitability should be checked against both camera compatibility and the installation environment, particularly for outdoor, industrial or coastal deployments where exposure conditions can influence fixing and maintenance requirements.
Kuwait Supply Chain Coverage
Kuwait project buyers can request quotation assistance and export supply coordination through FourTeck Kuwait. Provide the Hanwha Vision camera model, SBP-300WM1 quantity and project destination so compatibility and commercial terms can be reviewed together.
Kenya & East Africa Supply Infrastructure
System integrators and enterprise buyers in Kenya can route project inquiries through FourTeck Kenya. For surveillance accessories, the recommended approach is to send the camera bill of materials and mounting requirements together so the bracket, hanging adaptor and related accessories can be evaluated as a complete installation set.
Uganda Regional Procurement Support
Uganda inquiries can be coordinated through FourTeck Uganda for project sourcing and delivery planning. Current availability, export documentation, commercial terms and delivery schedules vary by project, so procurement teams should request a formal quotation with the exact models and quantities required.
Pan-African Regional Logistics & Trade Reach
For wider African technology projects, buyers can use FourTeck Africa or FourTeck Global to route multi-country supply inquiries. Regional projects often benefit from consolidated model validation before export, particularly when the same surveillance standard is being deployed across multiple countries. A consistent camera and accessory schedule can simplify project documentation while still allowing site-specific mounting adaptations.
Related FourTeck Products & Compatible Alternatives
| Accessory | Role | When to Consider |
|---|---|---|
| Hanwha Vision SBP-300WM | Swan-neck wall mounting option | Consider when the approved camera and site geometry call for the swan-neck mounting style rather than the SBP-300WM1 profile. |
| Hanwha Vision SBP-300B | Wall-mount base accessory | Useful when the approved mounting architecture requires a base element between the wall structure and another mounting component. |
| Hanwha Vision SBP-300PM | Pole mounting accessory | Select for pole-based surveillance points where a flat wall bracket alone is not suitable. |
| Hanwha Vision SBP-300KM | Corner mounting accessory | Consider for building corners where the camera must project across two wall planes or achieve a wider external viewing angle. |
| Hanwha Vision SBP-300CM | Ceiling mount | Use when the camera position is better served from a structural ceiling rather than a vertical wall. |
| Hanwha Vision SBP-300LM | Parapet mounting accessory | Consider for rooftop or parapet applications where the camera needs to extend beyond an edge to obtain the required external view. |
These alternatives are not automatic substitutes. The correct selection depends on the camera model, the approved hanging adaptor, the building structure and the required viewing position. A pole mount solves a different structural problem from a wall mount, while a parapet mount changes the camera geometry significantly. FourTeck can review the proposed camera schedule and help map each location to the appropriate accessory family before finalizing the order.
Why Enterprises Choose FourTeck
Enterprise technology procurement works best when commercial supply and technical validation happen together. FourTeck supports buyers by reviewing model numbers, quantities, delivery locations and accessory relationships before quotation. For a component such as the SBP-300WM1, that means confirming that the requested wall mount is being considered alongside the camera and hanging adaptor rather than treated as an isolated SKU. This approach helps reduce specification gaps that otherwise appear during installation.
Project buyers can also coordinate delivery sequencing, especially when CCTV hardware is being installed in phases across multiple sites. The quotation can identify current commercial terms, availability expectations and warranty guidance without relying on assumed stock or generic claims. Integrators can provide their approved bill of materials, and FourTeck can help route sourcing around the exact part numbers required for the project.
After supply, warranty handling depends on the applicable product and channel terms. Maintaining purchase records, serial information where relevant and the approved accessory schedule helps support any future claim or replacement process. For enterprise customers, the objective is not simply to source a bracket but to maintain a traceable procurement path from technical selection through delivery and support.
Frequently Asked Questions
1. What is the Hanwha Vision SBP-300WM1?
The SBP-300WM1 is a wall mount used with supported Hanwha Vision surveillance camera mounting assemblies. It is designed for installation on a wall or other suitable vertical structure and provides a PF 1½-inch mounting interface for compatible hanging accessories. The bracket is made from aluminum, finished in ivory and intended to become part of the mechanical support path for selected PTZ, dome or related camera installations.
2. What are the dimensions and weight of the SBP-300WM1?
Current manufacturer documentation lists dimensions of approximately 112 mm wide, 183 mm high and 207.5 mm deep. Product weight is approximately 625 g. These dimensions are useful when checking wall space, camera projection and installation clearances. The actual installed envelope will be larger once the hanging adaptor and camera are attached, so installers should model the complete assembly rather than using the bracket dimensions alone.
3. What maximum load does the SBP-300WM1 support?
The documented maximum load is 10 kg. This figure applies to the mount and should be considered alongside the total weight of the camera, hanging adaptor and any directly supported accessories. The wall anchors and building substrate require separate engineering validation. Outdoor installations may also need consideration of wind and vibration forces, especially when larger PTZ camera bodies are mounted at exposed heights.
4. Which cameras are compatible with the SBP-300WM1?
Compatibility depends on the exact Hanwha Vision camera and the required hanging adaptor. Manufacturer documentation lists supported mounting products including SBP-122HM, SBP-168HM and SBP-300HM7, while additional models may be supported through current compatibility resources. Because camera families change over time, buyers should provide the exact camera part number to FourTeck so the mounting chain can be checked before ordering.
5. Can the SBP-300WM1 be used outdoors?
The suitability of the complete installation depends on the selected camera, adaptor, fixing method, cable route and environmental exposure. The wall mount is an aluminum mechanical accessory, but outdoor readiness is not determined by the bracket alone. Installers should follow the current Hanwha Vision instructions and use appropriate anchors, weather sealing, conduit and cable glands where required. Coastal or highly corrosive environments may warrant additional project-specific review.
6. Does the SBP-300WM1 provide power or network connectivity?
No. The SBP-300WM1 is a passive mechanical wall mount and contains no power supply, Ethernet interface, PoE electronics or data-processing hardware. Power and network requirements are defined by the attached camera. During installation, the bracket should be coordinated with the planned cable path so Ethernet, power and any auxiliary wiring can reach the camera without excessive strain or unsuitable bend radius.
7. What wall type is required for installation?
There is no single universal wall type because the bracket can be used in different building environments. What matters is that the wall or structural backing can safely carry the complete assembly using appropriate anchors. Reinforced concrete, masonry, structural steel and lightweight partitions require different fixing strategies. The installer should identify the substrate before choosing fasteners, especially for high-level installations or camera points located above occupied areas.
8. Is the SBP-300WM1 available in Dubai and the UAE?
FourTeck can provide project quotations and availability guidance for Dubai and wider UAE requirements. Actual stock, lead time and warranty terms should be confirmed on the current quotation because accessory availability can change. For the fastest technical review, send the Hanwha Vision camera model, required quantity, delivery location and project timeline so the bracket and related hanging accessories can be checked together.
9. What information should I send when requesting a quote?
Provide the SBP-300WM1 quantity, the exact camera model, the hanging adaptor model if already selected, the UAE delivery location and the required project date. If the installation is outdoors or on a non-standard wall surface, include that information as well. For larger projects, a camera schedule or bill of materials is useful because it allows the mounting accessory relationships to be checked across multiple camera points.
10. Can FourTeck help select alternative mounts?
Yes. If the SBP-300WM1 does not match the intended camera or mounting surface, FourTeck can review alternatives such as pole, corner, ceiling, parapet or other wall mounting accessories from the Hanwha Vision ecosystem. The correct choice depends on the exact camera, structural surface, field-of-view requirement and environmental conditions, so providing a site description or camera schedule helps speed up selection.
Request a Configuration-Checked SBP-300WM1 Quote
For a precise quotation, send FourTeck the Hanwha Vision camera model, SBP-300WM1 quantity, required hanging adaptor if known, delivery emirate and deployment timeframe. If the project includes multiple camera types or different mounting surfaces, include the camera schedule so the wall mount can be validated as part of the complete accessory architecture. FourTeck can then coordinate current commercial terms, availability guidance and UAE delivery planning.
