ZKTeco Comet Turnstile in Dubai, UAE
The ZKTeco Comet Series is an indoor multi-credential swing-barrier speed gate built for controlled pedestrian entry, adaptable lane planning and modern corporate entrances.
The range includes Comet-S1000 and Comet-S1200 modules, supports several credential choices, and can be planned around standard or wider passage requirements. FourTeck can help UAE buyers review lane count, authentication method, controller choice, access software, floor readiness and project delivery requirements before quotation.
What the ZKTeco Comet Series Is Designed to Do
The Comet Series is designed to turn a building entrance into a controlled pedestrian passage point without making the reception area feel industrial. It combines a slim cast-aluminium chassis, swing barrier movement, credential integration and passage sensing in an indoor speed-gate format. For buyers, the important point is not only that the gate opens after an accepted credential. The more important value is that the entrance can be planned around the expected people flow, authentication method and accessibility requirement.
The series is built around two modules. Comet-S1000 is the single-lane module, while Comet-S1200 is used as a dual-wing module together with Comet-S1000 when creating wider or multi-lane arrangements. This distinction matters during project planning because a buyer normally needs to think in terms of complete lane architecture rather than a single cabinet. The standard lane width is 660 mm, while a 900 mm option is available for projects that need a wider passage. The manufacturer also provides clear acrylic as the standard door-leaf material with a clear tempered-glass option.
Credential choice is another major design variable. The Comet platform can be prepared for under-mount RFID, QR code, fingerprint or facial-recognition arrangements, with combinations available depending on the selected lid and controller. Top-mount options can also accommodate compatible ZKTeco facial terminals. That flexibility makes the platform relevant to offices that already have an access-control policy as well as new projects that want a more integrated entry experience.
For UAE buyers, FourTeck can help convert these technical choices into a purchase-ready requirement. Before quotation, it is useful to confirm the number of lanes, expected users, peak traffic, preferred credential, visitor-entry method, fire-alarm requirement, software environment, floor condition and delivery location. This prevents a common procurement problem: ordering the right product family but the wrong lane combination, reader arrangement or installation accessories for the actual site.
Why Businesses Consider the Comet Platform
The strongest business case comes from combining physical entrance control with flexible identity methods, sensible safety logic and a design that can fit reception-focused interiors. Each benefit below connects a confirmed platform capability to a practical project decision.
Choose the credential around the workflow
RFID, QR code, fingerprint and facial-recognition options allow project teams to align the entrance with staff badges, visitor passes or biometric workflows. This matters when a building already has an access policy and does not want the gate hardware to force a completely different verification process.
Standard or wider passage
A 660 mm standard lane and 900 mm optional width give planners a practical way to address regular pedestrian traffic and wider-access needs in the same product family.
Passage sensing and emergency behavior
Infrared sensing, force sensing, anti-pinch functions, fire-alarm input and automatic opening behavior during power loss support safer circulation planning when correctly commissioned.
Clear visual state information
The seven-colour RGB LED strip can indicate standby, normal passage, closing and alarm states, helping users understand what the lane is doing before they step into the controlled area.
Pre-assembled project delivery
The manufacturer lists the product as pre-assembled. For a project team, this can simplify site handling, although final reader fitting, controller integration, cabling, commissioning and floor anchoring still need proper planning.
Built around repeatable gate movement
The published mean cycles between failures figure is 6 million, while the brushless DC motor is specified for 0.8-second open or close movement. These figures do not replace site-specific traffic planning, but they give integrators useful mechanical reference points when evaluating a busy indoor entrance.
Important Technical Strengths for Entrance Projects
Comet is most compelling when a project needs the physical speed gate, user verification and entrance presentation to work together. The chassis uses 3 mm cast aluminium alloy, with silver as the standard colour and gold as an option. The standard lid is black tempered glass, while door-leaf options include clear acrylic and clear tempered glass. These material choices help the system fit front-of-house installations where appearance matters alongside access control.
The standard sensor arrangement uses eight pairs of infrared sensors in a high position. Gate logic includes anti-intrusion, anti-tailgating, wrong-way entry alarm and automatic closing if no person passes. The motherboard also supports access-mode, anti-pinch and anti-tailgate configuration. Integration points include one fire-alarm relay input and one RS485 port, while the controller choice remains configuration dependent.
For authentication, the under-mount options can use supported RFID readers, QR500 QR reader, FR1200/FR1500 fingerprint readers or G4 Pro facial recognition. Top-mount compatibility includes ProFace X, Elite Pass and SpeedFace V5L. Buyers should treat these as supported integration paths rather than automatically included components; the exact controller, reader, mounting kit and software should be confirmed in the quotation.
ZKTeco Comet Series Specification Reference
The table below uses published manufacturer data for the Comet-S1000 and Comet-S1200 family. Final reader, controller, mounting and software details depend on the selected configuration.
| Field | Specification |
|---|---|
| Brand / Series | ZKTeco Comet Series |
| Models | Comet-S1000 / Comet-S1200 |
| Lane type | S1000 single lane; S1200 dual-wing module used with S1000 |
| Lane width | 660 mm standard; 900 mm optional |
| Barrier movement | Swing, DC brushless motor, 0.8 s per open/close movement |
| Movement accuracy | ≤1.5° per movement |
| Authentication options | RFID, QR code, fingerprint, combinations, facial recognition with display; top-mount options configuration dependent |
| Published flow rate | RFID 30/min; QR 30/min; fingerprint 20/min; face 15/min |
| Sensors | 8 pairs IR sensors standard, high position |
| Communication | 1 × fire-alarm relay input; 1 × RS485 |
| Power | 110/220 V AC, 50–60 Hz; 20 VA standby, 120 VA operation |
| MCBF / MTTR | 6 million cycles / less than 60 minutes MTTR |
| Dimensions | 1500 × 115 × 1000 mm standard |
| Net weight | S1000: 100 kg; S1200: 65 kg |
| Operating environment | Indoor; -28°C to 60°C; up to 95% RH non-condensing |
| Software | ZKEasyGo / ZKBio Access / ZKBio CVSecurity, depending on equipped controller |
| Certifications | CE, FCC |
| Warranty / availability | Contact FourTeck for current options and warranty guidance |
Choosing the right configuration starts with the lane, not the reader. First decide how many controlled passages are needed and whether any lane requires the optional 900 mm width. Then confirm how employees, contractors and visitors will authenticate. A staff-only office may prefer RFID or face, while a reception environment may need QR for visitor passes as well. The published passenger-per-minute figures differ by credential method, so peak-hour traffic should be considered before deciding that one lane is enough. Finally, confirm the controller, supported software, fire-alarm connection, floor finish, power source and cable routes. FourTeck can use these details to prepare a more accurate bill of materials rather than quoting only the visible gate chassis.
Plan the Entrance Before Choosing the Final Comet Configuration
A speed gate is part of an entrance system, so the safest buying approach is to define the site and user journey first. The gate model is only one part of the requirement. Readers, access controller, network path, fire-alarm connection, power, floor anchoring, software and reception process can all change what needs to be supplied.
How many lanes are needed?
Map entry and exit flows during normal and peak periods. Include visitors, shift changes and reception queues. Multi-lane projects may combine S1000 and S1200 modules rather than simply repeating identical cabinets.
Which credential will users carry?
Confirm whether the organization uses cards, mobile/QR visitor passes, fingerprints or facial recognition. Reader choice affects throughput, mounting and controller compatibility.
Is a wider lane required?
The 900 mm option may be appropriate where accessibility, luggage, carts or a more generous passage width is required. Check the full entrance geometry before ordering.
What already exists on site?
Document the access platform, door-controller architecture, fire-alarm interface, network availability, nearby power, cable route and finished-floor condition.
What happens when power or fire state changes?
The Comet platform supports emergency unlocking and fire-signal input, but the complete site behavior must be designed and tested within the building’s safety requirements.
For a useful quotation, send FourTeck the lane count, preferred passage width, credential method, approximate users, peak flow, existing controller or software if any, floor condition, required quantity, delivery location and target project date. Photos or a simple entrance drawing can also help clarify the physical layout.
Where the Comet Series Fits Best
The strongest use cases are indoor locations where pedestrian access needs to be controlled without relying on a conventional door at every entry point. The transparent, slim form factor and configurable credential options make the platform especially relevant to reception and lobby environments.
Corporate headquarters and office lobbies
A reception entrance often needs employees to move through quickly while visitors follow a managed process. Comet can support card, QR or biometric workflows depending on the chosen configuration, giving the project team flexibility to separate staff credentials from temporary visitor access without changing the physical gate family.
Commercial buildings
Multi-tenant towers can use speed gates as a controlled boundary between public reception space and tenant-only lift or office areas. Integration planning should include the building access platform and visitor-management process.
Education and campus facilities
Indoor student or staff entrances may benefit from controlled lanes and clear visual status indication. Buyers should calculate peak arrival periods carefully because class changes can create concentrated traffic.
Business centres and shared workplaces
Where memberships, tenants and visitors use different credentials, a multi-credential gate can support a more consistent entry experience. The back-end access platform still needs to be selected and configured correctly.
Controlled internal zones
A gate can be positioned between an open lobby and a restricted operational area when the site layout supports it. This can be useful where doors alone would create queues or make visitor supervision difficult.
The manufacturer specifies the Comet Series for indoor application. Buyers should not assume that a lobby-looking installation is protected for outdoor weather exposure. If the intended location is external, semi-exposed or subject to wash-down, humidity or dust conditions beyond the published environment, FourTeck should review a more suitable entrance-control option.
ZKTeco Comet Series Multi-Credential Access
The Comet platform is not tied to one verification method. That is valuable because entrance-control projects often have more than one user population. Permanent employees may carry RFID cards, contractors may use another credential, and visitors may receive QR codes from a reception system. Biometric options can also be considered where the organization’s policy and privacy requirements allow them.
Under-mount options include RFID, QR, fingerprint and facial recognition, with supported component families published by ZKTeco. There are also top-mount accessory routes for compatible facial terminals. The practical buying point is that these options should be designed into the gate before purchase. A buyer should not order a basic chassis and assume every reader can be added later without changing lids, brackets, cabling or controller choices.
ZKTeco Comet Series Passage Safety and Control Logic
A pedestrian gate must make decisions while people are moving through it. The Comet platform combines infrared sensing, force sensing, anti-pinch settings and configurable anti-tailgating logic to help the controller understand whether a person is entering, leaving, moving in the wrong direction or attempting to follow another user too closely. The standard configuration lists eight pairs of high-position infrared sensors.
Emergency behavior is equally important. The gate supports a voltage-free fire-signal input and is designed to unlock automatically in emergency mode. It also opens automatically on power loss and includes an anti-panic push-opening mechanism. These functions are useful building blocks, but they are not a substitute for project-specific life-safety design. The final interface with the fire alarm and the expected fail-state should be reviewed, wired and commissioned by the responsible project team.
ZKTeco Comet Series Lane Throughput and User Experience
Published gate speed and real pedestrian throughput are not the same metric. ZKTeco specifies approximately 0.8 seconds for each open or close movement, but the published passenger flow also depends on the credential method: RFID and QR code are listed at up to 30 passengers per minute, fingerprint at 20, and face at 15. A project should therefore be sized around the full user journey rather than the motor specification alone.
The LED strip helps by communicating lane state with clear colours for standby, normal use, closing and alarm. An internal buzzer provides an audio indicator. For a busy reception, these cues reduce hesitation because users can see whether the lane is ready before presenting a credential. The optional wider lane can also improve usability where a standard passage is too restrictive for the expected population.
Decision checklist
- Estimate peak users per five-minute period, not only daily headcount.
- Choose the credential type before calculating lane capacity.
- Separate staff flow from visitor registration time.
- Confirm whether one lane must support wheelchairs, luggage or service movement.
- Allow physical queue space before the gate so authentication delays do not block reception circulation.
What Buyers Should Check Before Purchase
The main purchase risk is treating a speed gate as a single boxed product. A working entrance needs the correct lane combination, reader method, controller, software, fire-alarm interface, floor fixing and power plan. Confirm these items before requesting a final quotation.
Configuration Fit
Confirm S1000/S1200 lane architecture, 660 or 900 mm passage, door-leaf material, reader type, access controller and whether facial recognition needs the under-mount display arrangement or a top-mounted terminal.
Compatibility Check
Document the existing access-control software, credential format, network and controller environment. Confirm whether the preferred reader is supported and whether the required integration uses RS485, relay or another controller-side interface.
Availability and Warranty
Ask for the exact model, reader and accessory availability rather than assuming every option ships together. Warranty terms and local handling can vary by supply channel and selected configuration, so these should be stated in the quotation.
Quote Preparation
Provide lane count, passage width, credential method, approximate user population, peak flow, delivery location, floor condition, target installation date and whether FourTeck should include configuration or installation support.
Procurement Support for Dubai and the UAE
FourTeck supports ZKTeco Comet Series inquiries across Dubai and the UAE with assistance for model selection, configuration review, quote preparation, delivery coordination and warranty guidance. Availability may vary according to the selected S1000/S1200 combination, credential hardware, access controller, optional lane width, quantity and supplier status.
For project-based supply, the best approach is to send a requirement rather than only asking for a unit price. A useful request includes the number of lanes, user volume, preferred authentication, existing access platform, floor condition, required delivery location and project timing. FourTeck can then help identify the parts that belong in the quotation and flag any accessories or integration items that should be checked before ordering.
Dubai, Abu Dhabi, Sharjah and Ajman Project Support
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman and other UAE locations can contact FourTeck for Comet Series availability, lane-planning guidance and quotation assistance. For a single office entrance, the discussion may focus on one or two lanes and a straightforward credential method. Larger headquarters, commercial towers or campuses may require a multi-lane arrangement, visitor access workflow, controller integration and staged delivery plan. FourTeck can help buyers organize these requirements before purchase so the quoted configuration reflects the building layout and operational process rather than only the model name.
GCC and Africa Business Inquiries
FourTeck also supports business technology inquiries through regional channels for selected GCC and Africa markets. Organizations in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda and other locations can ask about suitable entrance-control products, project quantities and configuration requirements. Supply conditions, freight, warranty handling, installation responsibility and available accessories may differ by country, so a regional request should include the final delivery destination.
For regional projects, it is especially helpful to provide drawings, lane count, credential type and whether the installation will use an existing access-control platform. Buyers can start from FourTeck UAE or use the relevant regional inquiry channel such as FourTeck Kenya, FourTeck Uganda, FourTeck Africa or FourTeck Kuwait.
Other Entrance-Control Options Buyers May Consider
Comet is one option within ZKTeco’s broader entrance-control portfolio. The best alternative depends on whether the project needs a different chassis style, passage type, security level or budget profile. FourTeck can help compare the requirement without assuming that every site needs the same speed-gate family.
ZKTeco Mars Series
A related ZKTeco entrance-control family worth reviewing when the Comet form factor or project configuration is not the best fit. Compare lane architecture, credential needs and physical design before choosing.
ZKTeco Saturn Series
Another ZKTeco entrance-control family that may suit projects requiring a different gate format or design direction. FourTeck can review the intended environment and passage requirement.
ZKTeco SBTL Series
Consider when a swing-barrier requirement needs a different chassis family or project price point.
ZKTeco FBL Series
A flap-barrier family that may be more appropriate where the project specifically calls for flap-style lane control.
ZKTeco SBT2000S
A single swing-barrier option that may suit a different entrance layout than a full Comet multi-lane speed-gate project.
Practical Support Around the Product, Not Just the Model Number
Entrance-control purchases involve more than choosing a gate from a catalogue. The lane arrangement, credential method, controller, software, site preparation and building interfaces all affect whether the product works as expected. FourTeck’s role is to help buyers turn those project details into a clearer procurement request.
For more context on integrated building security, explore FourTeck CCTV and access control systems. For a broader technology requirement that includes networking, servers or deployment services, see FourTeck IT products and services.
Common Questions About the ZKTeco Comet Series
What is the ZKTeco Comet Series used for?
It is an indoor swing-barrier speed gate used to control pedestrian entry in places such as office lobbies, commercial buildings, campuses and other managed facilities. The gate can be paired with supported RFID, QR, fingerprint or facial-recognition options. The final use depends on how the lane, readers, controller and access software are configured for the building.
What is the difference between Comet-S1000 and Comet-S1200?
Comet-S1000 is the single-lane module. Comet-S1200 is a dual-wing module used together with Comet-S1000 when building a lane arrangement. A project should therefore be planned as a complete entrance layout rather than ordering modules independently. FourTeck can review the lane count and physical drawing before preparing a quotation.
Can the Comet gate use cards, QR codes or biometrics?
Yes, the manufacturer lists under-mount configurations for RFID, QR code, fingerprint and facial recognition, including combinations. Top-mounted facial terminal options are also supported for selected ZKTeco models. These readers are configuration choices rather than items that should be assumed to be included, so the exact authentication requirement should be specified before ordering.
Is a 900 mm lane available?
Yes. The standard lane width is 660 mm and the manufacturer lists 900 mm as an option. A wider lane can be useful when the entrance must accommodate wheelchair users, luggage or a more generous passage. The full lane geometry, door-leaf choice and surrounding reception layout should be checked before selecting the optional width.
How fast can people pass through the gate?
ZKTeco publishes up to 30 passengers per minute for RFID and QR, 20 for fingerprint and 15 for face, while gate movement is listed at 0.8 seconds per open or close action. Actual site throughput depends on credential presentation, user behaviour, queue design and access rules, so lane capacity should be planned around peak traffic.
Does the Comet Series support fire-alarm integration?
The published specification includes a voltage-free fire-signal input and emergency mode that unlocks the gate automatically. It also lists automatic opening on power loss. These capabilities still need to be designed into the building’s safety strategy and tested during commissioning. Buyers should provide the fire-alarm interface requirement when requesting a project quotation.
Can FourTeck help choose the controller and software?
Yes. ZKTeco lists ZKEasyGo, ZKBio Access and ZKBio CVSecurity support depending on the equipped access controller. Controller choice is configuration dependent. FourTeck can review the intended credential method, existing platform and project requirements so the quotation reflects a compatible controller and software path rather than only the mechanical gate.
Is the ZKTeco Comet Turnstile available in the UAE?
FourTeck accepts UAE inquiries for the Comet Series and can assist with quotation and delivery coordination. Current availability can vary by model, reader option, controller, lane width, quantity and supplier status. For the most useful response, provide the required number of lanes, authentication type, delivery location and target project date.
What should I send FourTeck before requesting a quote?
Send the lane count, standard or wide passage requirement, preferred credential method, estimated users, peak traffic, existing access-control system, delivery location and target date. Also mention whether the floor is finished and whether you need installation or configuration support. A simple lobby drawing or site photo can help FourTeck understand the physical arrangement.
Need Help Choosing the Right Comet Configuration?
FourTeck can review the intended entrance layout, quantity, lane width, authentication method, controller compatibility, delivery location and warranty expectations before preparing a quotation.
Share the number of lanes, credential type, estimated users, delivery location and target project date.