ZKTeco DL-858V17C-FS Fisheye Camera in Dubai, UAE
An 8MP 4K panoramic IP camera built to observe an entire scene from a single strategic mounting point, with a 360-degree fisheye view and on-board dewarping support.
For security teams, facility managers, integrators, retailers, logistics operators, and commercial property owners, the key buying question is not simply resolution. The camera must fit the recorder, viewing workflow, network, storage plan, mounting geometry, and night-monitoring requirement. FourTeck can help review these details before a quote is prepared.
A panoramic camera for spaces where coverage geometry matters
The DL-858V17C-FS is a specialist network camera rather than a conventional fixed-angle dome or bullet camera. Its purpose is to capture a very wide scene from one position using an 8MP Sony CMOS sensor and a fisheye lens with a 360-degree field of view. That makes it relevant when a security designer wants broad situational awareness across a lobby, retail floor, parking area, reception space, warehouse zone, public concourse, or other open environment where several narrower cameras might otherwise be required to observe different directions.
A fisheye image is intentionally distorted because the lens captures an extremely broad circular or panoramic scene. ZKTeco therefore provides dewarping support so the recorded or live view can be transformed into more usable perspectives. This is an important buying point: the camera may capture the full scene, but the practical operator experience depends on how the selected NVR, video management system, browser, or client software handles fisheye dewarping, live view, playback, and export. FourTeck recommends confirming this workflow before purchase rather than assuming every recorder treats fisheye video in the same way.
The camera records up to 3840 × 2160 resolution and supports H.265 and H.264 dual-stream encoding. It also includes infrared illumination for low-light black-and-white monitoring, motion detection, digital zoom, privacy masking, TWDR, defog, noise reduction, ONVIF Profile S interoperability, audio input/output, alarm input/output, RS485, and local micro-SD storage up to 128GB. Network connectivity is through a 10/100Mbps RJ-45 port. Power can be supplied through IEEE 802.3af Power over Ethernet or 12V DC, which gives integrators flexibility when planning cable runs and power distribution.
For a UAE project, selection should account for the physical site as much as the feature list. Mounting height, ceiling position, lighting, expected IR performance, network switch capacity, recorder compatibility, storage retention, remote viewing, environmental exposure, and required evidence quality all affect whether this camera is the right choice. FourTeck supports buyers with product verification, recorder and software matching, storage planning, quote assistance, delivery coordination, and guidance on suitable alternatives when another lens type or camera form factor would better fit the requirement.
Why a fisheye camera can simplify wide-area surveillance
The strongest value comes from scene coverage, operator awareness, and flexible network deployment. These benefits are most useful when the camera is placed and integrated correctly.
One viewpoint can observe an entire surrounding scene
A 360-degree fisheye field of view can reduce directional blind spots when the camera is mounted in the right central position. For retail floors, lobbies, reception areas, open offices, parking zones, waiting areas, and similar spaces, a panoramic view can give security operators a stronger sense of what happened around the camera rather than only inside one narrow viewing direction. This can also simplify investigation because activity moving across different directions remains within the same recorded scene.
8MP capture supports higher scene detail
The 3840 × 2160 sensor output provides more pixels than lower-resolution panoramic cameras. That gives operators more information to work with when digitally examining parts of a wide scene, although real-world identification quality still depends on distance, lighting, mounting height, lens geometry, bitrate, and recording settings.
Integrated IR supports after-hours monitoring
Four infrared LEDs provide an effective range stated at approximately 10 to 20 metres. In darkness the camera can move to black-and-white operation with IR. Buyers should treat this distance as a planning reference, then confirm the actual space, wall reflections, ceiling height, ambient light, and subject distance during design.
PoE can simplify camera cabling
IEEE 802.3af PoE allows compatible switches or injectors to carry power and data over the same Ethernet run. This can reduce the need for a nearby power socket at the camera location. It also makes central UPS protection easier when the PoE switch and recorder are protected together.
H.265 gives the recorder more flexibility
H.265 and H.264 support helps integrators balance image quality, network bandwidth, recorder compatibility, and retention targets. For an 8MP camera, storage planning is especially important because bitrate, frame rate, scene movement, retention days, and continuous-versus-event recording can materially change the required disk capacity.
ONVIF helps with mixed-platform projects
ONVIF Profile S support can assist interoperability with compatible recorders and video platforms. It should not be treated as a guarantee that every advanced function will work identically across every third-party system, so live view, recording, events, audio, and dewarping should be checked against the intended NVR or VMS.
A practical combination of panoramic optics, network video and edge connectivity
This model combines an 8MP 1/1.7-inch Sony CMOS sensor with a fisheye lens and 360-degree field of view. Its main stream supports 4K at up to 30 frames per second, while a secondary stream can be configured at lower resolutions for viewing or bandwidth-conscious applications. Bitrate control can use CBR or VBR across a stated range from 32Kbps to 16Mbps, giving the integrator control over the trade-off between picture quality, network load, and storage demand.
The imaging toolset includes TWDR, day/night operation, white balance, defog, 2D/3D digital noise reduction, HLC, BLC, mirror/flip, corridor mode, anti-flicker, privacy masking, ROI selection, motion detection, and digital zoom. These functions help tune the image for challenging lighting and operator needs, but they should be commissioned for the actual scene rather than left at generic defaults.
Connectivity goes beyond basic Ethernet. The unit offers one audio input and one audio output, one alarm input and one alarm output, RS485, a micro-SD slot supporting up to 128GB, and automatic network replenishment support. ZKTeco lists AntarVis 2.0, ZKBioSecurity IVS, ZKBio Access IVS and the AntarView Pro mobile application as management options. Browser compatibility needs care because ZKTeco notes that video streaming is not available in Firefox, Chrome or Safari for this model even though those browsers appear in the supported browser list.
ZKTeco DL-858V17C-FS specification summary
The values below are based on ZKTeco product documentation. Final deployment suitability still depends on the recorder, network, installation conditions, firmware, viewing software, and project design.
| Specification | Details |
|---|---|
| Brand / model | ZKTeco DL-858V17C-FS |
| Product type | 8MP fisheye panoramic IP camera |
| Image sensor | 1/1.7-inch Sony CMOS |
| Effective pixels | 3840 × 2160 |
| Lens / field of view | Fisheye lens, F1.4 aperture, 360° FOV |
| Minimum illumination | Color: 0.1 Lux / F1.4 (AGC ON); B/W: 0 Lux with IR ON |
| IR | 4 IR LEDs; effective range 10–20 m |
| Compression | H.265 / H.264 |
| Main stream | 4K, 5MP, 4MP, 3MP or 2MP up to 30fps |
| Sub stream | 720p, D1 or CIF up to 30fps |
| Video features | TWDR, day/night, white balance, defog, 2D/3D DNR, HLC, BLC, ROI, motion detection, digital zoom, privacy mask, mirror/flip, anti-flicker |
| Network | 1 × RJ-45 10/100Mbps; TCP/IP and common IP video protocols |
| Interoperability | ONVIF Profile S, SDK, API |
| Local storage | Micro-SD support up to 128GB |
| Audio / alarm / serial | 1 audio in, 1 audio out, 1 alarm in, 1 alarm out, RS485 |
| Power | PoE IEEE 802.3af or 12V DC ±10%; consumption under 5W |
| Ingress protection | IP66 |
| Operating conditions | -10°C to 50°C; 10% to 90% humidity |
| Dimensions | Ø149.4 × 50 mm |
| Warranty / availability | Contact FourTeck for current options and applicable terms |
How to read these specifications before buying
Resolution and field of view are only part of the decision. A fisheye camera places a large scene into one image, so the useful pixel density on a person or object can be lower than buyers expect if the camera is mounted very high or if the subject is far from the lens. If the goal is general situational awareness, a 360-degree panoramic camera can be highly effective. If the goal is face-level identification at long distance, licence-plate capture, or detailed recognition of a narrow entrance, a different camera type may be needed alongside it.
Storage should be calculated from the selected bitrate, frame rate, recording schedule, motion level, retention period, and number of cameras rather than from resolution alone. Recorder compatibility should include not just basic ONVIF connectivity but also fisheye dewarping, audio, events, playback and user workflow. FourTeck can review these points when the buyer provides the NVR or VMS model, number of cameras, expected retention days, site layout and preferred recording quality.
Configuration and buyer guidance
The safest way to select a fisheye camera is to start with the scene and evidence requirement, then work backward to mounting, recorder, storage and network design. The following checks prevent many common purchasing mistakes.
What must the camera prove?
Decide whether the goal is overview monitoring, incident reconstruction, people tracking, detailed identification, or evidence capture. A panoramic camera is strongest for scene awareness. For narrow, distant targets, a conventional fixed or varifocal camera may be required as a companion.
Does the recorder dewarp fisheye video?
Basic ONVIF connectivity does not automatically mean every fisheye viewing mode is available. Confirm the selected NVR or VMS can display, record and play back the required dewarped views, and verify whether dewarping happens in the camera, client, or recorder.
How many days must video be retained?
An 8MP stream can create meaningful storage demand. Tell FourTeck whether recording is continuous or event-based, the target frame rate and bitrate, retention days, camera count and whether a secondary stream will be used. This allows a more realistic disk calculation.
Is PoE available at the mounting point?
The camera supports IEEE 802.3af PoE, but the switch or injector must provide suitable power and the cable run must be planned correctly. Confirm cable category, route length, switch power budget and whether the network cabinet is backed by a UPS.
Will the environment fit the camera limits?
The unit is rated IP66 and has a stated operating range of -10°C to 50°C. Outdoor or semi-outdoor UAE projects should review shade, enclosure exposure, direct sun, local ambient temperature, dust, moisture, cleaning access and the actual mounting surface.
Send useful details with the quote request
Provide quantity, site type, mounting height, delivery location, recorder or VMS model, PoE switch details, retention target, installation requirement, required date and warranty expectations. These details help FourTeck respond with a more relevant supply or project recommendation.
Where panoramic coverage can be most useful
This camera fits best where one centrally placed lens needs to provide broad scene awareness. Its suitability should be judged by the required evidence level, not only by the size of the room.
Retail floors and shopping environments
Retail surveillance often needs context: where a person entered, how movement crossed aisles, whether an incident involved multiple directions, and what happened around a central floor area. A fisheye camera mounted above an open retail zone can preserve this wider context in one video stream. It can complement narrower cameras focused on entrances, payment areas, high-value displays or other points where facial or transactional detail is more important.
Reception and lobby monitoring
A lobby typically contains several activity directions: entrance doors, reception desks, waiting areas and internal corridors. A 360-degree view can provide an overview of the whole space, while dewarping can help operators examine specific zones. Installation height should balance broad visibility with usable person detail.
Warehouse open zones
In a warehouse, panoramic coverage can help observe open packing areas, staging zones, aisle intersections or loading activity from a central position. It should not replace dedicated cameras where reading labels, identifying faces at distance, or observing a specific loading door requires a narrower field of view and greater target detail.
Parking and open commercial areas
ZKTeco positions this model for broad open spaces such as parking environments. It can help provide general movement awareness around a mounting point. For licence-plate capture, long-range vehicle identification or directional gate monitoring, a specialised LPR or varifocal camera should be evaluated separately.
Office collaboration zones
Open-plan office common areas, shared entrances and collaborative floors can benefit from a discreet panoramic overview when the organisation has a legitimate security need and appropriate privacy policies. Privacy masking should be considered where parts of the scene should not be monitored.
Public and institutional spaces
Waiting areas, halls, service counters and similar public-facing spaces often need awareness across multiple directions. A fisheye camera can reduce the chance that an incident leaves the visible area simply because it moved around the camera. Final placement should follow site policy and applicable privacy or surveillance requirements.
DL-858V17C-FS 360° panoramic coverage and dewarping
The defining capability is the 360-degree fisheye field of view. Instead of pointing the lens toward one direction, the camera captures the surrounding scene in a highly curved panoramic image. This is useful for monitoring the relationship between events occurring in different directions around the same point. Security staff can gain a broader understanding of movement without switching between several independent fixed camera views.
Dewarping turns the circular or heavily distorted fisheye image into more familiar viewing perspectives. Depending on the software, users may view a panorama, select virtual directions, or inspect areas of the image as though they were separate views. The important limitation is that dewarping does not create new captured detail; it remaps the existing pixels. Therefore mounting position and pixel density still determine what can be identified.
For procurement, confirm how operators expect to use the image in live view and playback. If the recorder only stores the raw fisheye stream but does not offer convenient playback dewarping, investigation can be less intuitive. FourTeck can help check the intended NVR or VMS workflow before the camera is selected for a larger deployment.
DL-858V17C-FS low-light tools, IR and 8MP video
The camera combines 8MP resolution with imaging controls intended to preserve a usable picture under varied lighting. ZKTeco specifies color operation down to 0.1 Lux at F1.4 with automatic gain control on, plus black-and-white operation at 0 Lux when IR is active. Four built-in infrared LEDs provide a stated effective range of approximately 10 to 20 metres. This can support after-hours monitoring in dark areas without requiring separate visible lighting at the camera.
Real sites are more complex than a distance rating. IR can reflect from nearby walls, glossy surfaces, low ceilings or objects close to the lens, while distant subjects may receive less illumination. The camera’s TWDR, HLC, BLC, defog, white balance and digital noise-reduction functions can help manage challenging scenes, but commissioning should be performed after installation with the actual lighting conditions present.
DL-858V17C-FS network integration, storage and power
A network camera becomes valuable only when its video can be transported, recorded, reviewed and maintained reliably. This model uses a 10/100Mbps Ethernet interface and supports standard IP networking protocols together with ONVIF Profile S, SDK and API options. ZKTeco also lists AntarVis 2.0, ZKBioSecurity IVS and ZKBio Access IVS as management software choices, with AntarView Pro for mobile viewing.
Local micro-SD storage up to 128GB can provide an additional recording option, while ANR support can help recover video after network interruptions when paired with a compatible recorder workflow. For business systems, local storage should normally be considered part of a resilience design rather than a substitute for centrally managed recording unless the project has been deliberately designed that way.
PoE is especially useful because the camera can be powered from the same cable carrying network data. The camera’s stated power consumption is under 5W, but switch sizing must account for the full camera estate, cable losses, switch PoE budget and any future expansion. Where a 12V DC supply is used instead, power reliability and cable routing should be reviewed separately.
Decision checklist
- Confirm the exact NVR/VMS model and firmware generation.
- Check dewarping, live view, playback, event and audio support.
- Calculate storage from bitrate and retention days.
- Confirm PoE switch budget and cable route.
- Plan whether micro-SD will be used for edge recording or failover.
What Buyers Should Check Before Purchase
The biggest purchase risk with a fisheye camera is assuming that a 360-degree view automatically replaces every other camera. It is excellent for panoramic awareness, but identification distance, mounting geometry, recorder dewarping, storage and installation environment still determine whether the result meets the security objective.
Configuration Fit
Confirm whether the primary objective is overview or detailed identification. Measure the mounting height and typical subject distance. Decide the target frame rate, quality and retention period. If the camera is being selected for a large open space, identify critical areas that may still need a dedicated fixed, varifocal, PTZ or LPR camera for higher target detail.
Compatibility Check
Provide the current NVR or VMS model to FourTeck. Check ONVIF connectivity, dewarping modes, recording, playback, audio, alarm I/O, user access and browser workflow. Confirm whether the selected PoE switch can power the camera and whether the network has enough uplink capacity for the planned camera count and bitrate.
Availability and Warranty
Availability can change with supplier status, project quantity and model lifecycle. Warranty conditions may also depend on the source and commercial offer. Buyers should request the current lead time, applicable warranty terms, included accessories, packaging condition and any recommended replacement model before issuing a purchase order.
Quote Preparation
For a useful quote, share the model, quantity, delivery location, required date, recorder platform, PoE switch model, retention days, installation requirement, mounting environment and warranty expectation. For a new CCTV project, also include a basic floor plan or camera count so storage, networking and compatible recorder options can be reviewed together.
Accessories can change the project outcome. Depending on the site, buyers may need appropriate Ethernet cabling, PoE switching, junction or mounting hardware, surge protection, UPS backup, micro-SD storage, an NVR with sufficient channels and disk bays, display hardware, and secure remote-access planning. None of these should be assumed from the camera model alone. FourTeck can help build a project list around the actual environment instead of treating the camera as an isolated item.
Buying support for surveillance projects in the UAE
FourTeck supports business inquiries for ZKTeco surveillance products across Dubai and the UAE with product selection, compatibility checks, quote preparation, delivery coordination and warranty guidance. Availability should be confirmed at the time of request because surveillance models, supplier positions, order quantities and project schedules can change. FourTeck does not need the buyer to have every technical detail ready before making contact, but the more information provided, the more useful the first response can be.
For an existing CCTV system, send the recorder model, camera count and switch details. For a new deployment, share the number of areas to monitor, intended mounting locations, desired retention period, whether installation is needed and the target completion date. FourTeck can then help match the camera, recorder, storage and network components more coherently.
Dubai, Abu Dhabi, Sharjah and Ajman project coverage
Businesses in Dubai, Abu Dhabi, Sharjah and Ajman can contact FourTeck for product availability, configuration guidance, quote assistance and delivery coordination. The same product may be suitable for very different sites, so requirements should be described in operational terms: the area being monitored, number of cameras, mounting environment, recorder platform, retention target, installation scope and expected project timing.
For multi-site organisations, it is also useful to explain whether all locations will be viewed from one control room, whether remote access is needed, and whether the same NVR or VMS standard must be maintained across branches. FourTeck can help identify where this fisheye model fits and where another camera type may provide a more suitable field of view or evidence level.
GCC and Africa availability support
FourTeck also supports business technology inquiries across selected GCC and Africa markets through its regional platforms and inquiry channels. Customers in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda and other supported markets can request information about model availability, suitable alternatives, project quantities, delivery possibilities and commercial support. Availability, warranty handling, import requirements and delivery arrangements may vary by country and supplier status.
For regional projects, procurement teams should provide the destination country and city, required quantity, target date, installation scope, recorder or VMS platform, and whether the request is for a single site or a multi-branch rollout. This helps separate a simple product supply request from a solution-design requirement. Regional deployments may also need different power, mounting, storage or warranty planning, so the correct commercial and technical route should be confirmed before ordering.
Useful regional resources include FourTeck UAE, FourTeck Kenya, FourTeck Uganda, FourTeck Africa and FourTeck Kuwait. Buyers should use the platform relevant to the delivery country so current logistics and support options can be discussed accurately.
Other products and solution paths buyers may consider
A fisheye camera is often one element inside a wider surveillance design. Depending on the scene, evidence requirement and recorder platform, these alternatives or complementary product families may be worth reviewing before finalising the bill of materials.
ZKTeco ZKBio Sense 8MP fixed cameras
Consider an 8MP fixed or varifocal network camera when the requirement is to concentrate more pixels on a doorway, aisle, loading bay or distant target rather than cover all directions from one point. A fixed camera can complement a fisheye unit by providing evidential detail in critical areas.
ZKTeco network video recorders
Choose a compatible NVR with enough channels, throughput and disk capacity for the full camera count and retention target. Fisheye playback and dewarping workflow should be verified before final selection.
PoE network switching
For multi-camera deployments, the PoE switch must support the required port count, power budget and uplink capacity. Centralised PoE also simplifies UPS-backed power for surveillance devices.
Specialist LPR or varifocal cameras
When the task is vehicle plate capture, gate monitoring or longer-distance identification, a specialist narrow-purpose camera may be more appropriate than a panoramic view.
Video management and remote viewing
Larger sites may need central user management, multi-site viewing, permissions and investigation tools beyond a basic NVR interface. The software should be matched to the operating workflow.
Why business buyers contact FourTeck
Surveillance procurement is rarely just a matter of selecting a camera from a specification sheet. The camera must be suitable for the scene, integrate with the recording platform, fit the network and power design, meet storage-retention expectations and align with the commercial project schedule. FourTeck supports buyers by helping connect those decisions before a purchase is finalised.
This approach is useful for SMB, enterprise, retail, logistics, property, education and other organisations that want a practical procurement conversation rather than a model-only quotation. For a broader view of available security services, visit FourTeck CCTV and access control solutions or use the FourTeck contact page to send the project requirement.
Questions buyers ask about this ZKTeco fisheye camera
What is the ZKTeco DL-858V17C-FS used for?
It is designed for panoramic IP video surveillance in areas where a wide 360-degree scene is useful. Typical applications include retail floors, lobbies, parking areas, warehouse zones, open offices and public spaces. It is strongest for situational awareness and broad scene coverage. If the project needs detailed identification of a distant doorway, face or licence plate, a narrower specialist camera may also be required.
Does this camera really provide a 360-degree view?
Yes. ZKTeco specifies a 360-degree field of view through the fisheye lens. The raw image is highly panoramic and distorted by design. Dewarping support can convert the captured scene into more familiar viewing perspectives, but the available live-view and playback layouts depend on the camera software, NVR or VMS being used.
Can it work with a third-party NVR?
The camera supports ONVIF Profile S, which can help interoperability with compatible third-party recorders. However, buyers should confirm more than basic video connectivity. Fisheye dewarping, playback, audio, alarm events, motion events and user workflow can vary between platforms. Give FourTeck the exact NVR or VMS model so compatibility can be reviewed before purchase.
How much storage will an 8MP fisheye camera need?
Storage depends on bitrate, frame rate, compression, scene movement, recording schedule and retention period. The camera supports H.265 and H.264 with configurable bitrate control. There is no single correct storage figure for every project. For accurate planning, provide the number of cameras, required retention days, recording mode and preferred quality settings so the NVR disk requirement can be calculated.
Does it support night vision?
Yes. ZKTeco specifies four IR LEDs with an effective infrared range of approximately 10 to 20 metres. The camera can operate in black-and-white with IR when there is no visible light. Actual night performance depends on mounting height, reflective surfaces, scene geometry, ambient light and subject distance, so the IR specification should be treated as a planning reference rather than a guaranteed identification distance.
Can the camera be powered through PoE?
Yes. It supports IEEE 802.3af Power over Ethernet and can also use 12V DC ±10%. PoE is convenient because power and data can share the Ethernet cable. For multi-camera installations, check the total PoE budget of the switch, the cable route and whether the switch and recorder should be backed by a UPS for better surveillance continuity.
Is local micro-SD recording available?
Yes. ZKTeco lists micro-SD support up to 128GB. Local storage can be useful for edge recording, network-loss resilience or smaller standalone use cases, depending on the system design. For business surveillance, buyers should still decide how central recording, backup, retention, user access and evidence export will be handled rather than relying on the memory card alone.
Is this camera suitable for outdoor use in the UAE?
The camera carries an IP66 ingress-protection rating and ZKTeco states an operating temperature range of -10°C to 50°C. For UAE outdoor or semi-outdoor locations, installation should still be reviewed for direct solar heating, shade, enclosure temperature, dust, water exposure, mounting surface and maintenance access. Where site temperatures may exceed the stated operating range, another model or protected installation approach should be considered.
How do I request a quote from FourTeck?
Send the model, required quantity, delivery location, target date and intended use through the FourTeck contact page. For a more accurate project recommendation, also include the NVR or VMS model, PoE switch details, mounting environment, retention period, installation requirement and warranty expectation. FourTeck can then check current availability and whether additional accessories or alternative cameras should be included.
Can businesses request bulk or project supply?
Yes, businesses can submit project or quantity requirements for review. The commercial response can depend on supplier availability, quantity, delivery schedule and whether the request also includes NVRs, storage, PoE switches, cabling or installation services. For multi-site projects, provide the site count, per-site camera quantities, delivery locations and standardisation requirements so the overall solution can be planned more consistently.
Need help matching the camera to your surveillance system?
FourTeck can review the intended scene, required quantity, mounting environment, NVR or VMS compatibility, storage retention, PoE requirements, delivery location and warranty expectations before preparing a quote. This helps avoid buying a panoramic camera that cannot be used in the desired dewarped view or recording workflow.
Share the model, quantity, recorder platform, retention days, site type, delivery location and target date.