ZKTeco Comet-S1000 Swing Barrier Speed Gate in Dubai, UAE
A single-lane indoor speed gate for organizations that need controlled pedestrian access without turning the reception area into an industrial-looking checkpoint.
The Comet-S1000 combines swing-barrier movement, infrared presence sensing, a brushless drive system and flexible credential integration. It is intended for projects where the access lane, authentication method, safety behaviour and visual presentation all matter. FourTeck can help buyers translate those project requirements into a practical bill of materials before a quotation is prepared.
A controlled entrance lane designed around both people flow and access decisions
The Comet-S1000 is best understood as the physical passage layer of an access-control project. It creates a defined pedestrian lane, receives the release decision from the chosen controller or credential system, moves the swing barrier to permit entry, and uses sensing logic to monitor the person moving through the lane. For a corporate reception, shared office, education facility, financial workplace or managed commercial building, that combination helps turn an ordinary doorway into a more structured entry point.
Its standard configuration provides a 660 mm passage, while a 900 mm lane can be selected where a wider route is needed. The gate uses a DC brushless motor with a stated movement time of 0.8 seconds for opening or closing. ZKTeco also specifies a mechanical clutch intended for anti-panic and anti-collision behaviour, infrared sensing, safety force detection, anti-intrusion logic, anti-tailgating logic, wrong-way alarms and automatic opening under emergency or power-loss conditions. These are important project details because entrance-control equipment has to balance restriction with safe movement rather than simply lock a path.
The authentication layer is intentionally flexible. Depending on the selected build, the lane can be prepared for RFID cards, QR codes, fingerprint readers, facial recognition or combinations of those methods. Under-mount and top-mount terminal approaches are supported, and the exact controller determines software compatibility. That means buyers should not purchase the lane body in isolation. The correct question is whether the selected gate, credential reader, controller, management platform, fire-alarm interface, lane width and installation environment work together as one entrance system.
For UAE buyers, this is especially relevant in projects where architects, facilities teams, security teams and IT administrators may all influence the specification. FourTeck can help consolidate those requirements into a clearer request: number of lanes, entry and exit logic, user credential, visitor handling, accessibility expectation, controller choice, software platform, floor condition, delivery point and required support. That preparation reduces the chance of buying a visually suitable gate that later needs different readers, mounting hardware or integration work than expected.
Why the Comet-S1000 can fit a professional access-control project
The strongest reason to consider this model is not a single specification. It is the way the lane design, safety features and credential flexibility can be combined around a controlled indoor entrance.
A defined lane instead of an uncontrolled doorway
A speed gate makes the permission decision visible and physical. When a valid credential is presented, the barrier opens to create a clear passage; when entry is not authorized, the lane remains controlled. For offices, campuses and managed facilities, this supports a more consistent entry process than relying on staff observation alone. It can also create a more professional visitor experience when the credential workflow is planned well.
Choose credentials around the operating model
RFID can suit employee access, QR can support visitor or temporary credentials, fingerprint can provide biometric verification, and facial recognition can support touchless workflows. The benefit is not simply having multiple technologies available; it is the ability to select a method that matches user volume, security policy, visitor process and existing access-control infrastructure.
Sensing and emergency behaviour are part of the design
The official specifications include safety force sensing, infrared presence detection, emergency release behaviour and automatic opening on power loss. Those functions matter because pedestrian control equipment must react predictably when a person pauses, passes with assistance, moves in the wrong direction or an emergency state is triggered. Final site testing and system configuration remain important.
Slim architecture for reception-facing spaces
With a standard chassis depth of only 115 mm and a cast-aluminium body, the Comet platform is designed for entrances where appearance matters. The tempered-glass lid, transparent barrier leaf options and configurable RGB indication can be easier to integrate into an architectural lobby than bulkier industrial gates. Site dimensions still need to be confirmed before ordering.
Brushless drive and service-oriented construction
ZKTeco specifies a DC brushless motor, a mean cycles between failures figure of six million and a mean time to repair under 60 minutes. These figures do not remove the need for preventive maintenance, but they give project planners useful reference points when evaluating an entrance lane that may operate repeatedly throughout the business day.
A wider passage option helps address accessibility planning
The 900 mm optional lane can be important where the project needs more space for wheelchairs, mobility assistance or easier movement with bags and equipment. ZKTeco also differentiates accessibility handling by authentication configuration, particularly for the under-mount facial-recognition version. Buyers should therefore treat accessibility as a complete lane-design question involving width, reader position, user detection and operating policy rather than selecting a wider barrier leaf alone.
What stands out technically
This model is built around a single swing lane, a slim cast-aluminium chassis and an access-control architecture that can be equipped for several credential types. The most important buying advantage is configurability: the entrance can be tailored to the organization instead of forcing every user through the same verification method.
The lane includes an internal buzzer and a customizable seven-colour RGB strip along the lid for visual status communication. ZKTeco identifies blue for standby, steady green for normal use, steady red for closing and flashing red for alarm conditions. Those cues can help users understand the lane state quickly in busy reception spaces.
Confirmed Comet-S1000 technical details
The values below are based on ZKTeco product information for the Comet Series. Credential hardware, controller, software connection, barrier material and lane width can change with the selected configuration, so the final quotation should identify the exact build.
| Specification | Comet-S1000 |
|---|---|
| Brand / Model | ZKTeco / Comet-S1000 |
| Product type | Single-lane swing barrier speed gate |
| Lane width | 660 mm standard; 900 mm optional |
| Dimensions | 1500 × 115 × 1000 mm standard |
| Motor | DC brushless motor |
| Movement time | 0.8 seconds per opening or closing movement |
| Movement accuracy | ≤1.5 degree per movement |
| Chassis / lid | Cast aluminium alloy chassis; black tempered-glass lid standard |
| Barrier leaf | Clear acrylic standard; clear tempered glass option |
| IR sensors | 8 pairs standard, high position |
| Credential options | RFID, QR code, fingerprint, facial recognition and selected combinations; configuration dependent |
| Typical stated flow rates | RFID 30/min; QR 30/min; fingerprint 20/min; face 15/min |
| Power supply | 110 V / 220 V AC, 50–60 Hz |
| Power rating | 20 VA standby; 120 VA operation |
| Communication / fire input | RS485 ×1; fire-alarm relay input ×1 |
| Software support | ZKEasyGO, ZKBio Access or ZKBio CVSecurity depending on equipped controller |
| Operating environment | Indoor |
| Temperature / humidity | -28°C to 60°C; up to 95% RH non-condensing |
| Net / gross weight | 100 kg net; 130 kg gross |
| MCBF / MTTR | 6 million cycles / under 60 minutes |
| Certifications | CE, FCC |
| Site preparation | Flat, level finished floor; optional base plate for unfinished floor |
The main purchase choices are not the motor or chassis dimensions; those are largely fixed. The choices that change the project are lane width, reader or biometric terminal, controller, software platform, barrier material and the arrangement of multiple lanes. A buyer planning employee access with existing RFID cards may need a different bill of materials from a reception that issues QR visitor passes or a site that wants face authentication. For that reason, confirm the end-to-end access workflow before locking the hardware list.
How to select the right Comet-S1000 configuration
The correct configuration starts with the way people will use the entrance. A clear requirement brief makes it easier to decide which reader, controller, lane width and software connection belong in the quotation.
Who is passing through?
Separate employees, contractors, visitors and assisted users. Their credentials and passage patterns may be different. If visitors receive QR codes while staff use RFID cards, specify both workflows from the beginning rather than adding a second reader later.
Which credential should release the lane?
Choose the authentication method around your access policy and existing system. RFID can be straightforward for staff cards; QR can suit temporary or visitor permissions; biometrics may help where identity verification must be tied more closely to the user. Reader model and mounting method are configuration dependent.
Is the passage width suitable?
The standard 660 mm lane is compact, but not every project should default to it. If wheelchairs, mobility assistance, luggage or frequent equipment movement are expected, review the 900 mm option and the surrounding clearances. Accessibility should be checked against the complete entrance design and local project requirements.
What controller and software are already in use?
Software support depends on the equipped access controller. Tell FourTeck whether the project already uses a ZKTeco platform, another controller architecture or a new standalone deployment. Integration needs should be confirmed before equipment is ordered.
What happens during fire alarm or power loss?
The gate includes a voltage-free fire input and supports automatic opening when power is lost. The project should still document how the entrance behaves during emergency states, how that signal is wired, and who is responsible for commissioning and testing the fail-safe operation.
Is the installation area ready?
ZKTeco specifies an indoor environment and a flat, level finished floor, with a base plate option for unfinished floors. Check power, cable routes, controller location, reception furniture, adjacent lanes, emergency egress and final floor finish before scheduling installation.
For a useful quote, send FourTeck the number of lanes, required passage width, preferred credential, expected daily users, current access platform, project location, floor condition, installation requirement, target date and any accessibility or visitor-management needs. That gives the sales team enough context to review whether the requested hardware is likely to fit the project.
Where this type of speed gate makes practical sense
The Comet platform is intended for indoor entrance control. It is most useful where the organization needs a clearly managed pedestrian lane and already has, or plans to build, a credential-based access process.
Corporate reception and employee access
A reception area often needs to do several jobs at once: allow employees to enter quickly, stop unverified access, direct visitors, preserve a clean architectural look and maintain a safe passage route. The slim Comet chassis and multiple credential options make it suitable for this kind of mixed environment. Staff may use cards or biometrics while visitors follow a separate QR or reception-assisted process, provided the controller and software are configured for that workflow.
Commercial buildings and shared offices
Multi-tenant buildings need an entrance layer that can separate public lobby space from controlled areas. A speed gate can provide the physical checkpoint while the access system decides which tenant, floor or zone a user may enter. The final software and access policy depend on the controller and wider building system.
Education and campus administration
Administrative buildings, libraries, staff areas or controlled student facilities may use turnstile-style entry where cards or another credential identify permitted users. The optional wider lane can also be considered where accessibility and varied user groups are part of the requirement.
Financial and professional workplaces
Organizations that maintain stricter front-of-house access policies can use a speed gate to enforce the release decision from the credential system. Anti-tailgating and wrong-way detection functions add behavioural monitoring at the lane, although overall security still depends on staffing, cameras, doors, policies and the surrounding access design.
Visitor-managed facilities
Where visitors are preregistered or issued a temporary credential, QR-capable configurations can help connect the visitor process to the physical lane. Before selecting this approach, confirm how QR codes are generated, where they are validated, how exceptions are handled and how reception staff intervene when a credential fails.
High-visibility lobbies
The cast-aluminium structure, glass lid and clear barrier materials can suit locations where the security equipment is part of the customer-facing interior. Buyers should still prioritize safe circulation, lane spacing and service access over appearance. Architectural drawings should be reviewed with the physical dimensions before finalizing the entrance plan.
Comet-S1000 Credential Flexibility and Access Integration
The gate can be configured around several credential technologies rather than being tied to one reader. ZKTeco lists under-mount support for RFID readers, QR readers, fingerprint readers and facial-recognition terminals, as well as top-mount options for selected face terminals. That creates useful design freedom, but it also means the buyer has to define the authentication experience before the hardware is finalized.
A staff-only entrance may prioritize fast card presentation and simple visual feedback. A visitor-heavy lobby may need QR handling. A higher-assurance area may combine a biometric decision with a card or another factor depending on the access-control design. The lane should therefore be treated as one component of a complete identity-and-access workflow, not a standalone security product.
Comet-S1000 Safety Sensing and Passage Behaviour
A speed gate has to do more than open quickly. It needs to understand where the person is in the lane, avoid closing at the wrong time, react to forced movement and enter a safe state when the building signals an emergency. ZKTeco specifies eight high-position infrared sensor pairs as standard, together with safety force sensing, lower safety sensors, presence detection, anti-intrusion logic, anti-tailgating logic and wrong-way alarms.
These features should be commissioned as part of the whole entrance, not assumed to work correctly without configuration and testing. The installer should verify sensor alignment, barrier motion, fire input, power-loss response, accessibility behaviour and the interaction between adjacent lanes. Project teams should also decide how security staff respond to anti-tailgating or wrong-way alarms, because the gate can detect events but the building still needs an operating procedure.
Comet-S1000 Lane Design, Throughput and User Experience
The way a gate feels in daily use depends on more than opening speed. Lane width, credential speed, user familiarity, reader position, visitor exceptions and adjacent traffic all influence throughput. ZKTeco states up to 30 people per minute for RFID or QR, 20 for fingerprint and 15 for face in its Comet specifications. Those figures are useful references, but real flow will depend on the credential process and site behaviour.
Decision checklist
- Use the standard 660 mm lane where compact layout is the priority and the passage requirement allows it.
- Consider the 900 mm option where mobility devices, bags or wider passage are expected.
- Do not compare throughput by motor speed alone; credential verification can be the slower part of the journey.
- Place readers and displays where users can understand what to do before they enter the sensing zone.
- Plan exception handling so reception staff can assist when a credential is rejected or a visitor is not preregistered.
For projects with several parallel lanes, the Comet-S1200 dual-wing extension model may be part of the arrangement, while the S1000 functions as the primary single-lane unit. The exact lane combination should be drawn on the floor plan before procurement. That is especially important in premium lobbies where security equipment, reception furniture, lift queues and visitor circulation all compete for the same space.
What Buyers Should Check Before Purchase
The biggest purchase risk is choosing the gate body by model name and leaving the credential, controller, lane layout and installation details for later. A speed-gate project works best when those decisions are made together.
Configuration Fit
Confirm whether the project needs RFID, QR, fingerprint, facial recognition or a combination. The answer changes reader hardware, mounting, controller requirements and user experience. Also confirm whether 660 mm is sufficient or whether a 900 mm lane is needed. If several lanes are planned, provide a sketch showing entry direction, exit direction and any wider accessible lane.
Compatibility Check
Tell the supplier which access controller, software platform and credentials are already deployed. ZKTeco software support depends on the equipped controller, so existing infrastructure can materially change the recommended configuration. Check fire-alarm integration, RS485 needs, power location, floor finish, reader cabling and the available space around each chassis before confirming the order.
Availability and Warranty
Availability can change with the selected reader, barrier material, lane width, project quantity and supplier status. Warranty terms may also depend on the supplied configuration and commercial source. Ask for the final quotation to identify the exact model, accessories, warranty guidance, delivery scope and any installation services rather than relying on a generic web listing.
Quote Preparation
Provide the quantity of lanes, preferred credential, expected user volume, passage width, building location, access software, target date, installation requirement and any accessibility or visitor needs. If the project is replacing an older gate, include photos, current lane dimensions and controller details. Those inputs help FourTeck recommend a suitable supply scope instead of pricing an incomplete configuration.
Buyers should also plan the long-term operating details: who will issue credentials, who will manage visitor exceptions, how access logs will be reviewed, what preventive maintenance will be scheduled and how the entrance will be handled during renovation or power work. The gate may be the most visible part of the system, but the surrounding process determines whether it remains convenient and secure over time.
Selection, delivery coordination and warranty guidance
FourTeck supports product inquiries in Dubai and across the UAE with assistance around model selection, configuration review, quotation, delivery coordination and warranty guidance. For this type of entrance-control equipment, support is most useful before the purchase order is issued, because a small change in credential method or lane layout can change the required readers, controller, mounting hardware or software connection.
Availability is not assumed to be immediate. It can vary with model configuration, project quantity and current sourcing conditions. For the fastest review, share the complete requirement rather than asking only whether the base model is available. Contact FourTeck for product assistance.
Support for projects across major UAE business centres
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman and other UAE locations can contact FourTeck for product availability guidance, configuration review and quote assistance. The project location matters because delivery planning, installation access, site scheduling and after-sales handling may vary. When requesting a quotation, include the delivery site, floor or entrance location, number of lanes and whether installation or commissioning support is required. This helps the sales team distinguish a simple equipment supply from a project that needs more detailed coordination.
GCC and Africa project availability guidance
FourTeck also supports business technology inquiries through regional channels for selected GCC and Africa markets. Requirements from Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda and other locations can be reviewed based on product configuration, supplier status, shipping route and local project needs. Stock, delivery time, warranty handling and installation options should be confirmed for the destination rather than assumed from UAE availability.
Regional buyers can begin with FourTeck UAE, FourTeck Kenya, FourTeck Uganda, FourTeck Africa or FourTeck Kuwait as appropriate. Include the required lane count, credential method, destination and project schedule so the inquiry can be evaluated with the right context.
Other ZKTeco entrance-control options buyers may consider
A similar model may be more suitable when the lane arrangement, outdoor requirement, cabinet material or project budget is different. The alternatives below are starting points for discussion, not automatic replacements.
ZKTeco Comet-S1200
Designed as the dual-wing companion within the Comet Series, it is relevant when a project needs additional lane combinations built around the same design language. Confirm the exact arrangement with the project drawing.
ZKTeco Saturn-S1000
A different ZKTeco swing-barrier family that can be relevant where project environment, cabinet design or authentication approach calls for another platform.
ZKTeco Mars-S1000
Worth reviewing for projects that want a different ZKTeco swing-gate construction and entrance-control profile. Compare environment, lane width and material requirements before choosing.
ZKTeco swing barrier range
If the project does not yet have a fixed model, browsing the broader swing-barrier range can help identify a better fit for lane count, environment or physical design.
Access control readers and terminals
The correct reader or biometric terminal is part of the complete gate solution. Match the credential hardware to the controller and management software.
Why business buyers involve FourTeck before ordering
Entrance-control purchases often cross several teams. Security defines who may enter. IT or the system integrator manages credentials and software. Facilities manages power, floor work and physical access. Procurement needs a clear commercial scope. FourTeck can help bring those details into one product inquiry so the buyer is comparing a complete requirement rather than only a chassis model.
This approach is especially useful for project quantities, fit-out schedules and replacement projects where site constraints may not be visible from a model number. The goal is to identify the information that changes the purchase decision early, so the quotation is more useful to both technical and procurement teams.
Questions business buyers commonly ask
What is the ZKTeco Comet-S1000 used for?
It is a single-lane indoor swing barrier speed gate used to control pedestrian entry. A connected access-control system decides whether a presented credential is valid, and the gate creates the physical passage. It can suit offices, commercial buildings, campuses and managed reception areas where staff, visitors or other authorized users need a structured entrance process.
Which credential methods can be configured?
ZKTeco lists options for RFID cards, QR codes, fingerprint readers and facial-recognition terminals, including selected combinations. The exact reader and mounting approach depend on the chosen configuration. Buyers should specify how employees and visitors will authenticate, because the credential choice affects controller requirements, physical mounting, throughput and software integration.
Is a 900 mm lane available?
Yes. ZKTeco specifies 660 mm as the standard lane width and 900 mm as an option. The wider lane can be relevant where the entrance needs more clearance for wheelchairs, assisted passage, bags or equipment. The full floor plan and accessibility requirements should be reviewed rather than selecting width based only on the gate specification.
Can it integrate with ZKTeco software?
Supported software depends on the equipped access controller. ZKTeco references ZKEasyGO, ZKBio Access and ZKBio CVSecurity in current product information. Before purchase, confirm the controller model, software platform and any existing database or credential environment so the final configuration is selected around the actual system rather than a generic compatibility assumption.
What should be prepared at the installation site?
ZKTeco specifies indoor use and a flat, level finished floor, with a base plate option for unfinished flooring. The project should also plan power, access-control cabling, fire-alarm input, controller location, lane spacing, reader position and service access. Final floor finish and cable routes are best confirmed before equipment arrives to avoid rework during commissioning.
How does the gate behave during a power failure?
The official specifications state that the barrier supports automatic opening when power is lost and provides a voltage-free input for a fire-alarm fail state. The project installer should still test the exact emergency behaviour after commissioning. Emergency egress is a system-level requirement involving the gate, power, alarm interface and building safety plan.
Is the Comet-S1000 available in Dubai?
FourTeck can review current supply options for Dubai and other UAE projects. Availability may depend on lane configuration, credential reader, controller, barrier material, project quantity and supplier status. Send the required configuration and delivery location when requesting a quote so availability can be checked against the actual build rather than the base model name alone.
What information should I provide for a quotation?
Provide the number of lanes, preferred lane width, credential method, expected user type, existing controller or software, project location, installation requirement, target delivery date and any accessibility or visitor-management needs. Photos or floor plans are useful for replacement projects. With those details, FourTeck can prepare a more relevant quotation and identify whether accessories or an alternative gate family should be considered.
Can businesses request multiple lanes for a project?
Yes, project quantities can be discussed, but the lane arrangement should be defined first. Multi-lane layouts may use the Comet-S1000 with the companion S1200 configuration depending on the design. Share a floor plan or lane sketch showing directions, wide-lane requirements and reception position so the hardware quantity reflects the intended entrance rather than a simple count of cabinets.
Should I choose Comet or another ZKTeco swing barrier?
Choose based on environment, lane layout, cabinet design, credential workflow and project constraints. The Comet platform is specifically listed for indoor use and emphasizes a slim cast-aluminium design with multiple credential options. If the site needs sheltered outdoor use, different materials or another security level, a Saturn, Mars or other ZKTeco entrance-control family may be worth reviewing with FourTeck.
Need help specifying the right entrance-control configuration?
FourTeck can review the intended use, lane quantity, credential choice, passage width, controller, software environment, delivery location and installation expectations before preparing a quote. This is particularly useful when the entrance must support both employee access and visitor handling or when a wider accessible lane is part of the project.
Share the model, lane count, authentication method, delivery location, target date and any floor-plan details available.
