Quick Procurement & Configuration Matrix

Executive Product Architectural Overview

The MAXHUB Raptor Series V3 180-inch display sits in a useful middle ground between traditional large-format flat panels and fully bespoke modular LED wall projects. A conventional LCD display becomes difficult to scale once room size, sightlines and audience count push beyond common commercial panel dimensions. Multi-panel LCD video walls can deliver larger canvases, but they introduce visible seams, several display controllers, more alignment points and additional service considerations. A custom LED wall can eliminate bezels, yet it often requires separate processing, carefully coordinated cabinet selection, external audio, control hardware, operating devices and site integration. The Raptor Series V3 addresses this project friction by packaging key visual, compute, audio, connectivity and management functions into a single all-in-one architecture.

For the LX180V07, the physical canvas measures 180 inches diagonally in a 16:9 format. The display area is approximately 3996 × 2248 mm, while overall dimensions are approximately 4026 × 2373 mm. That scale is appropriate for venues where a conventional 86-inch or 98-inch panel cannot provide sufficient visual impact or readable content density. MAXHUB specifies a recommended viewing distance of at least 4 metres, which is a useful planning point for room designers. The 2.0 mm pixel pitch and 1920 × 1080 native resolution place this model in a large-room Full HD category rather than a close-view ultra-fine-pitch application. This distinction matters: buyers should select the display based on audience distance and content type, not diagonal size alone.

The display engine uses SMD LED technology with adjustable brightness from 100 to 600 nits, a 3840 Hz refresh rate, 13–16 bit grayscale, a specified 6500:1 contrast ratio, adjustable color temperature from 2300 K to 9300 K, and broad 160-degree horizontal by 140-degree vertical viewing angles. These characteristics support corporate presentation, conferencing, dashboards, video playback, signage and teaching content across wide seating plans. Brightness can be adapted to room conditions, while the high refresh rate supports smooth on-camera use and moving content. A built-in light sensor can assist with intelligent brightness adjustment, reducing the burden on operators in rooms where ambient light changes during the day.

The embedded system is equally important to the all-in-one concept. MAXHUB equips the Raptor Series V3 with Android 13, an eight-core processor architecture combining four Cortex-A76 and four Cortex-A55 cores at up to 2.4 GHz, 8 GB of RAM and 64 GB of storage. The built-in platform supports mainstream video, audio and image formats and can run the collaboration and control functions required for day-to-day presentation. Wireless display workflows include MAXHUB Share, Miracast, Chromecast and AirPlay, helping mixed-device organizations present content without depending on a single laptop ecosystem. An optional PC module can be added when a Windows-based workflow is required, but configuration should be validated against the intended conferencing or application stack.

Audio is integrated rather than treated as an afterthought. The platform includes four full-range speaker units and two low-frequency units with maximum speaker output of 120 W and a stated maximum sound pressure level of 95 dB. In many boardroom or education deployments, this can reduce the need for separate room speakers for everyday content. Larger auditoriums or acoustically challenging venues may still benefit from dedicated audio engineering, so FourTeck recommends treating the built-in system as a strong baseline rather than assuming it replaces every external reinforcement scenario.

Connectivity supports both direct presentation and broader room integration. The interface set includes multiple HDMI inputs, HDMI output, USB, USB-C, analog audio, RJ45 network interfaces, RS232 support through RJ45, a PoE+ network connection intended for compatible MAXHUB PTZ cameras, separate OPS and Android LAN connections, and USB pass-through functions. This matters for room architects who need to combine laptops, conferencing equipment, cameras, control processors, external audio devices and management networks without building an entirely separate signal layer. The display also supports MAXHUB Pivot for centralized device management and can be controlled through MAXHUB touch-console workflows or compatible mobile applications.

From an operational standpoint, front-access maintenance is one of the most significant architectural features. The LED modules can be serviced from the front, reducing the need to preserve deep rear-access corridors behind the screen. The display itself is only about 28 mm thick, although real installation depth will be greater once the mounting structure, wall condition, cable routing and ventilation allowances are considered. For Dubai and UAE projects, where premium boardrooms and public-facing interiors often place strong emphasis on clean architectural finishes, this front-service design can simplify coordination between AV contractors, fit-out teams, electrical contractors and interior designers.

The result is a platform best understood as an integrated large-room collaboration and visualization endpoint. It is not merely a bigger television. It is a combination of LED display surface, signal processing, embedded operating environment, audio subsystem, wireless presentation engine, networked management endpoint and serviceable modular display. Enterprises should therefore evaluate it as part of the room architecture: wall loading, power circuits, network segregation, video source strategy, camera placement, audio requirements, control integration, service access and installation sequence all influence the success of the deployment.

Enterprise Business Value & ROI Benefits

Return on investment for a display of this class should be measured across the full lifecycle rather than as a simple screen-price comparison. A lower-cost display arrangement may require external processors, additional speakers, presentation gateways, more complex mounting, repeated calibration or extra control hardware. Conversely, a premium all-in-one LED platform can concentrate those functions into a single managed endpoint. The financial outcome depends on room count, installation complexity, maintenance model, project lifespan and the business value of the room itself. An executive briefing centre used for customer presentations may justify the platform through improved visitor experience and faster setup, while a university lecture hall may prioritize visibility, serviceability and standardization.

Procurement teams should therefore compare the Raptor Series V3 against the total installed cost of alternatives. Include structural works, mounting, electrical circuits, signal distribution, audio, compute, wireless presentation, room control, service access, commissioning and support. FourTeck can assist with a bill-of-material review so the comparison reflects the entire deployment rather than only the headline display hardware.

Hardware & Technical Architecture Highlights

At the display layer, the LX180V07 uses SMD direct-view LED technology. Each LED module forms part of a continuous active-emissive canvas, so the image is produced directly by the LED surface rather than by an LCD panel with a backlight. The 2.0 mm pixel pitch means adjacent pixel centres are separated by two millimetres. That density is appropriate for the model’s published minimum recommended viewing distance of approximately four metres. When audiences sit substantially closer, buyers should assess whether a finer-pitch alternative better matches the intended content.

The native 1920 × 1080 resolution is distributed across the 3996 × 2248 mm active display area. For corporate video, conferencing, signage and presentation applications, this provides a familiar Full HD workspace at very large physical scale. Content systems should be configured to output the display’s native resolution where practical, avoiding unnecessary scaling stages that can reduce text clarity. The 3840 Hz refresh rate is particularly useful where the screen may appear on camera, because high refresh performance can reduce visible scanning artefacts in recorded or broadcast environments.

Brightness is adjustable between 100 and 600 nits, allowing the display to operate in controlled boardroom lighting as well as brighter interior spaces. The integrated ambient light sensor supports automatic brightness responses. Color temperature can be adjusted from 2300 K through 9300 K, and the display offers 13–16 bit grayscale. For installations that must follow specific brand color standards, FourTeck recommends commissioning with appropriate test content and validating the calibration procedure as part of acceptance.

The embedded compute platform uses Android 13 with an eight-core processor arrangement comprising four Cortex-A76 cores and four Cortex-A55 cores at up to 2.4 GHz, supported by 8 GB RAM and 64 GB storage. This provides the local processing needed for interface control, media playback, wireless collaboration and application functions. It should not be treated as a substitute for every high-performance workstation workload. Where a Windows application, enterprise desktop image or specialized conferencing software is mandatory, the optional PC module or an external compute device should be specified.

Network architecture includes Wi-Fi 6 with dual-band 2.4 GHz and 5 GHz operation in AP and station modes, Bluetooth 5.3, and multiple wired Ethernet interfaces. Separate network paths for Android and optional OPS compute can help integrators plan device management and corporate access. An RJ45 interface supports RS232 protocol for control integration, while a PoE+ RJ45 port can supply up to 30 W for a compatible MAXHUB PTZ camera. These interfaces create a stronger foundation for integrated meeting-room design than a consumer-class display with only one generic LAN port.

Audio hardware consists of four full-range and two low-frequency speakers, with 120 W maximum power. The system supports straightforward playback and conferencing use without immediate dependency on an external amplifier. For larger or acoustically complex spaces, integrators should still model room coverage, reverberation and microphone strategy. The screen’s audio capability may serve as the main system in a boardroom but only as a supplemental source in an auditorium.

Mechanically, the display is specified at about 28 mm screen thickness and approximately 185 kg net weight excluding the wall-mounting bar and stand. Gross weight including the wall-mounting bar is approximately 375 kg. These figures make structural review mandatory. The wall, substructure, anchoring method and installation access must be checked by qualified personnel. The front-maintenance design reduces routine service access demands, but the installation still needs sufficient space for cables, mounting hardware, airflow and safe technician access.

Definitive Technical Specifications Table & Sizing Notes

Technical figures should be interpreted in context. The 180-inch model is fixed at Full HD native resolution and 2.0 mm pitch, so it is most appropriate where viewers are several metres from the screen. If a customer requires very close viewing, fine text at short distance, or native 4K resolution, the 220-inch 1.2 mm Raptor Series V3 variant may be more appropriate, subject to room size and budget. Conversely, smaller Raptor V3 models can make more sense where wall width, ceiling height or structural capacity is limited.

Dimensions and weight are critical project inputs rather than catalogue footnotes. Before ordering, the wall substrate should be reviewed, structural support confirmed, access path measured, lifting method planned and final mounting height agreed. Power and network outlets should be positioned to avoid visible cabling while remaining serviceable. Because manufacturer specifications can be revised, the final FourTeck quotation and current product documentation should be checked before construction drawings are frozen.

Configuration, Sizing & Deployment Workbench

Workload headroom for an LED display differs from a server or firewall because the limiting factors are primarily visual density, room scale, source architecture and embedded compute capability. User count is therefore best expressed as room occupancy and viewing geometry rather than licensed seats. Storage throughput matters mainly where the embedded system is expected to play local media; high-bitrate or specialized content may be better served from a dedicated player. Network port density matters when cameras, control systems, optional PC modules and management networks all converge around the display. License terms for conferencing applications or optional management services should be confirmed separately because they can vary by software platform and region.

Industry Use Cases & Workload Scenarios

Technical Feature Deep Dive 1: Processing, Throughput & Workload Performance Architecture

A large-format LED display has two distinct performance domains: image transport and embedded application processing. The image path determines how external HDMI or networked content reaches the LED canvas, while the Android subsystem governs local applications, wireless sharing, media decoding and user-interface functions. Treating those layers separately helps buyers avoid unrealistic expectations. A laptop connected by HDMI is not constrained by the Android processor in the same way as a locally running application, while a heavy local software workload can still exceed the practical role of an embedded collaboration device.

The LX180V07 operates at a native 1920 × 1080 resolution. That keeps source compatibility straightforward because Full HD remains widely supported across PCs, conferencing systems, signage players and AV switchers. The design goal should be a clean native signal path. Where long cable runs are required, certified extension technology should preserve resolution and frame rate without adding unnecessary scaling. A common integration mistake is to chain several processors because each vendor component includes a scaler; every additional conversion can add latency, image softness or troubleshooting complexity.

The 3840 Hz refresh specification addresses a different dimension of performance. It is the LED refresh characteristic, not the same as a 3840-frame-per-second content source. The practical benefit is stable image reproduction and improved behaviour when the screen appears in camera footage. This matters in hybrid events, broadcast-style briefing rooms and executive video production where a low-refresh LED wall may show scan bands under certain shutter settings. The Raptor V3 therefore fits environments where the display must serve both in-room viewers and cameras.

The embedded Android 13 platform uses four Cortex-A76 and four Cortex-A55 cores at up to 2.4 GHz, 8 GB RAM and 64 GB storage. The big.LITTLE-style core mix balances responsive application performance with background efficiency. In practice, that supports launcher functions, local media, wireless presentation, device controls and supported collaboration applications. Organizations should avoid turning the embedded subsystem into a general-purpose workstation for heavy data analysis, engineering applications or complex desktop software. An optional PC module or external workstation is the better design for those workloads.

Media-format support includes mainstream MPEG families, H.263, H.264, H.265, VC-1, VP9, VP8, MVC and AV1 video, along with common image formats and MP3 audio. This breadth is useful for local playback and signage scenarios. However, codec support does not automatically guarantee flawless playback for every combination of bit depth, container, bitrate and unusual encoding profile. Mission-critical media should be tested on the delivered system or played from a purpose-built signage engine.

Wireless throughput and usability depend on the room network. Wi-Fi 6 dual-band capability allows the display to join modern enterprise wireless environments or operate in appropriate access-point workflows. MAXHUB Share, Miracast, Chromecast and AirPlay create several ways for users to cast content, but user experience will depend on device support, network discovery and security policy. A well-engineered deployment chooses a primary wireless method, documents a guest procedure and disables redundant pathways if they create confusion or security concerns.

Technical Feature Deep Dive 2: Security, Redundancy & System Resilience

Security for a connected display should be treated as part of the enterprise endpoint architecture. The Raptor V3 includes Android, Wi-Fi, Bluetooth, wired Ethernet, casting protocols, USB and optional PC expansion. Each function increases flexibility, but each also creates a policy decision. Security teams should determine which interfaces are permitted, how the display is segmented, whether guest devices can discover it, whether administrative access is restricted and how firmware or application updates are governed.

In sensitive boardrooms, one practical model is to place AV equipment on a dedicated VLAN with limited routing to corporate systems. The embedded Android interface can be granted only the internet or management access it actually requires. The optional PC module, if domain joined, can be treated as a managed corporate endpoint with identity controls, endpoint protection, patching and configuration policy. Wireless casting can then be enabled in a controlled way rather than exposing the display indiscriminately across office networks.

Physical resilience begins with installation quality. A 180-inch LED wall is a substantial system, and wall structure, anchors, cable stress relief and power protection are all part of reliability. Front-access maintenance allows technicians to service the display without dismantling surrounding wall finishes or reaching behind the unit. This is operationally important because maintenance access problems can turn a small component service into a major room outage.

The specified LED lifespan of at least 100,000 hours indicates the long-life nature of the light-emitting components, but it should not be interpreted as a guarantee that every electronic component will operate for that duration without service. Power supplies, connectors, control electronics and environmental conditions influence system life. Preventive practices include maintaining clean airflow, avoiding condensation, keeping operating temperature within the specified -10°C to 40°C range, managing humidity between 10% and 80% RH non-condensing, and protecting the system from construction dust or accidental impact.

Redundancy should be designed according to business criticality. The all-in-one platform simplifies normal deployments but does not automatically make the entire room redundant. A mission-critical operations centre may require secondary source devices, spare LED modules or service components, dual network paths, alternate presentation inputs and a documented recovery plan. A boardroom may accept a simpler model in which the primary resilience strategy is rapid local service. FourTeck can help buyers define spares and support scope based on downtime tolerance rather than applying the same package to every project.

The embedded keypad-lock function can support basic local-control governance, while RS232 and network control can allow a central room-control platform to enforce predictable startup and shutdown behaviour. This is useful when non-technical users operate the room. Rather than exposing every display setting, the room interface can present approved functions such as source selection, volume and conferencing modes. Operational simplicity is itself a resilience mechanism because it reduces accidental misconfiguration.

Technical Feature Deep Dive 3: Remote Management, Telemetry & Infrastructure Integration

Large displays become easier to operate when they are managed as endpoints rather than treated as isolated room furniture. The Raptor Series V3 supports MAXHUB Pivot, allowing it to participate in MAXHUB’s centralized device-management ecosystem. For organizations with several meeting rooms, training rooms or branch sites, centralized management can reduce the number of physical room visits needed for routine administration and provide a more standardized operating model.

Infrastructure integration starts with the network topology. The display provides wired LAN connectivity for Android, a separate OPS LAN path, Wi-Fi 6 and control-oriented RJ45 interfaces. The correct design depends on whether the organization wants AV equipment isolated, whether the optional PC requires corporate access, and how management traffic is routed. Network administrators should document IP addressing, DNS, NTP, proxy requirements, firewall rules and wireless policy before commissioning. An LED wall that is physically installed but cannot reach required services is not operationally complete.

Control integration can use RS232 protocol through RJ45 alongside network methods, enabling connection to third-party automation platforms where supported. This allows the Raptor V3 to participate in coordinated room states. For example, a boardroom preset might wake the display, select the conferencing input, set a predefined audio level and activate related room systems. Another preset can place the room in presentation mode. Such automation reduces training requirements and improves consistency across repeatable meeting scenarios.

The dedicated PoE+ connection capable of up to 30 W for a compatible MAXHUB PTZ camera is a practical integration feature. It can reduce separate power cabling for supported camera designs and helps create a coordinated manufacturer ecosystem. Camera selection should still be based on room depth, required optical zoom, field of view, mounting position and conferencing platform. A 180-inch display can serve a large room, so a camera that works well in a small huddle space may be inadequate.

Telemetry value depends on how the organization uses it. Facilities teams may care about device uptime and power state, AV teams may care about source and firmware status, while IT teams may prioritize network reachability and software version control. Defining these responsibilities before deployment prevents the common problem in which a sophisticated room has no clear operational owner. FourTeck recommends assigning display administration, network ownership, room support and warranty escalation roles in the handover documentation.

The abundance of physical I/O also gives integrators a flexible fallback strategy. If wireless sharing is unavailable, users can connect through HDMI. If a built-in application is unsuitable for a specialized workflow, an external PC can drive the native Full HD input. If a room control platform is required, RS232 or network integration can provide deterministic control. This layered design makes the display adaptable without requiring every use case to pass through one software stack.

What Buyers Should Check Before Purchase

Buyers should also confirm the route from loading bay to final room. Large LED systems may ship in substantial protective packaging, and service elevators, corridor turns, door widths, ceiling heights and lift access can affect installation sequencing. In high-rise Dubai offices, building-management permissions and delivery windows can be as important as product lead time. In active corporate facilities, after-hours installation may need to be scheduled separately.

UAE Regional Availability & Service Ecosystem

FourTeck supports enterprise and institutional buyers across the UAE with configuration validation, quotation coordination, logistics planning and project-specific supply guidance. For a large-format display, the process should begin with technical fit and site readiness rather than stock status alone. Current availability, shipment timing, installation scope, warranty terms and optional accessories are confirmed at quotation stage. Buyers can submit floor plans, room photos, wall elevations and required deployment dates to improve planning accuracy.

K1. Dubai Supply & Logistics Support

Dubai projects range from DIFC boardrooms and Downtown customer-experience centres to Free Zone offices, hospitality venues, universities and corporate headquarters. FourTeck can coordinate commercial quotations, model validation, delivery planning and project staging across Dubai. Where building access is controlled, buyers should provide loading-bay procedures, installation windows and permit requirements early. For Free Zone sites, shipment and documentation requirements can be aligned with the purchasing entity and delivery terms.

K2. Abu Dhabi & Al Ain Logistics Reach

FourTeck supports sourcing and quotation coordination for Abu Dhabi and Al Ain corporate, government, education, healthcare and industrial projects. Large-scale deployments may require site-specific delivery schedules, security clearances or phased installation plans. Pre-sales review can address wall loading, room use, connectivity and optional accessories before the commercial scope is finalized.

K3. Sharjah & Northern Emirates Logistics Infrastructure

Organizations in Sharjah and the Northern Emirates can use FourTeck for project quotation, procurement coordination and delivery planning. Education campuses, industrial offices, showrooms and public venues often have different access and operating constraints, so logistics should be matched to site conditions. Configuration review can also help determine whether the 180-inch model or another Raptor V3 size offers the best fit.

K4. Ajman & Surrounding Emirates Logistics Coverage

Ajman-based businesses can request hardware availability verification, technical pre-sales guidance, delivery coordination and project quotation. For fit-out projects, early coordination with electrical, civil and AV contractors helps ensure wall reinforcement, power outlets and cable pathways are completed before the display installation date. Final supply terms are confirmed against the actual project requirement.

GCC & Pan-African Supply Chain Reach

FourTeck can support cross-border technology projects with regional inquiry routing, export quotation, configuration review, shipping coordination and commercial documentation assistance. Large-format LED systems require careful packaging, freight planning and destination-site preparation, so international orders should include delivery city, quantity, Incoterm preference where applicable, consignee requirements and target installation date. Customs duties, taxes, certification needs and local installation responsibilities vary by destination and should be confirmed for each project.

L1. Saudi Arabia (KSA) Export & Supply Support

Saudi enterprise projects can request model validation, project quotation and supply coordination for boardrooms, training centres, customer briefing environments and large presentation spaces. Buyers should provide destination city, quantity and required delivery window so freight and documentation can be aligned with the project schedule.

L2. Qatar Market Supply Reach

Qatar-based buyers can request cross-border sourcing, commercial quotation and logistics coordination. Hospitality, education, government and corporate projects may require precise delivery appointments and installation sequencing. FourTeck can align the display configuration with room geometry and accessory needs before shipment.

L3. Oman Regional Distribution Support

For Oman, FourTeck can support hardware procurement guidance and quote coordination for organizations planning large meeting or presentation spaces. Site power, network architecture, mounting responsibility and final delivery location should be included in the request so the supply scope is commercially clear.

L4. Kuwait Supply Chain Coverage

Kuwait projects can use FourTeck Kuwait for project quote assistance, technical inquiry routing and export supply coordination. Confirm model, quantity, project location and deployment timeline when requesting a commercial response.

L5. Kenya & East Africa Supply Infrastructure

Kenyan system integrators, corporate buyers and project teams can connect through FourTeck Kenya for regional distribution support, technical inquiry routing and delivery coordination. Large-screen projects should include room drawings and freight destination details where possible.

L6. Uganda Regional Procurement Support

Uganda inquiries can be routed through FourTeck Uganda for localized project response, technology sourcing and supply management. Warranty handling and installation responsibility should be confirmed in the project quotation for cross-border deployments.

L7. Pan-African Regional Logistics & Trade Reach

For broader African technology projects, FourTeck Africa and FourTeck Global can support multi-country inquiry routing, export planning and project supply discussions. Buyers should identify destination country, final delivery city, expected quantity and whether installation will be handled locally or as part of a coordinated project.

Related FourTeck Products & Compatible Alternatives

Alternative selection should be based on the relationship between screen width, pixel pitch, resolution and viewing distance. The 180-inch LX180V07 is compelling when a large seamless canvas is required in a room where viewers are typically four metres or farther from the display. A smaller fine-pitch model may produce better perceived detail in a tighter boardroom, while the 220-inch 4K model is better suited to very large premium spaces that require higher native pixel density.

FourTeck can compare these models using wall elevation, seating layout and dominant content. This avoids selecting a display solely from diagonal size. A practical side-by-side evaluation should include structural weight, overall dimensions, power, closest viewing distance and source resolution in addition to purchase price.

Why Enterprises Choose FourTeck

Enterprise display procurement is rarely successful when treated as a simple box purchase. FourTeck’s role is to help the buyer translate a room requirement into a technically coherent supply scope. That begins with model validation: confirming diagonal size, viewing distance, resolution, mounting constraints, source devices and optional accessories before commercial approval. For a 180-inch LED wall, these checks can prevent avoidable rework after delivery.

Quotation coordination is structured around the information the project team actually needs, including hardware quantity, delivery location, installation requirement, target timeline and warranty expectation. Where several departments are involved, FourTeck can help separate product supply from civil works, electrical preparation, AV installation and software responsibilities so each stakeholder understands the boundary of scope.

Delivery planning is equally important. Large-format displays require suitable packaging handling, building access and installation sequencing. FourTeck can coordinate shipment timing with the customer or system integrator and can flag the need for site checks where access or structural conditions are unclear. Post-sales warranty support is handled according to the terms confirmed in the quotation rather than through vague assumptions. This evidence-led approach gives procurement teams a clearer basis for approval and gives technical teams better inputs for deployment.

Frequently Asked Questions

Plan Your MAXHUB Raptor V3 180-Inch Deployment

For an accurate quotation, send FourTeck the requested model LX180V07, quantity, delivery location, room type, wall dimensions, closest viewing distance, preferred installation height, target deployment timeframe, compute requirement and any camera, conferencing or control-system details. This allows the team to align the commercial offer with the physical and technical environment rather than quoting a display in isolation.

If the project is still at concept stage, provide the room drawing and intended use. FourTeck can help determine whether the 180-inch model is the right fit or whether another Raptor V3 size better matches audience distance, resolution requirements and available wall space.

Request MAXHUB Project Quote

Structured Product Data

The following structured data mirrors the core product identity, procurement context and common buyer questions used on this page. Commercial price, live stock and fixed warranty duration are intentionally not asserted because those details require current project confirmation.

{"@context":"https://schema.org","@graph":[{"@type":"Product","name":"MAXHUB Raptor Series V3 180-Inch All-in-One LED Display","sku":"MAXHUB-RAPTOR-V3-180-DUBAI","brand":{"@type":"Brand","name":"MAXHUB"},"model":"LX180V07","description":"180-inch SMD DvLED all-in-one display with 1920 x 1080 resolution, 2.0 mm pixel pitch, Android 13, Wi-Fi 6 and front-access maintenance."},{"@type":"MerchantListing","name":"MAXHUB Raptor Series V3 180-Inch All-in-One LED Display in Dubai, UAE","itemOffered":{"@type":"Product","name":"MAXHUB Raptor Series V3 180-Inch All-in-One LED Display","model":"LX180V07"},"seller":{"@type":"Organization","name":"FourTeck","url":"https://fourteck.ae"}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What is the exact model number of the 180-inch Raptor Series V3?","acceptedAnswer":{"@type":"Answer","text":"The 180-inch model is LX180V07 with 2.0 mm pixel pitch and 1920 x 1080 native resolution."}},{"@type":"Question","name":"How far should viewers sit from the 180-inch display?","acceptedAnswer":{"@type":"Answer","text":"MAXHUB recommends a viewing distance of at least 4 metres for the LX180V07."}},{"@type":"Question","name":"Is the MAXHUB Raptor V3 180-inch model 4K?","acceptedAnswer":{"@type":"Answer","text":"No. The LX180V07 is a native 1920 x 1080 Full HD display."}}]}]}