ZKTeco MB560-VL Multi-Biometric Attendance Terminal in Dubai, UAE
A Linux-based terminal that combines visible-light facial authentication, fingerprint verification, optional card credentials and password entry for attendance and controlled-door workflows.
It is a practical fit for organisations that want one wall-mounted device to manage daily staff verification while keeping more than one authentication method available. FourTeck can help confirm the correct capacity, card module, network method, software platform and door-control requirements before quotation.
ZKTeco has published older regional MB560-VL specifications as well as a newer 2025 ZAM70 specification. Confirm the exact order ID, hardware generation, biometric algorithm, connectivity and software support before purchase so the delivered unit matches the project requirement.
What the MB560-VL Does in a Business Environment
The MB560-VL is designed for organisations that want attendance recording and basic access-control functions in one multi-biometric endpoint. Instead of forcing every employee to use the same credential, the terminal can authenticate by face, fingerprint, card where the appropriate module is selected, or password through the physical keypad. That flexibility is valuable in offices where different staff groups may need different methods because of hygiene policy, work environment, enrolment practicality or existing card infrastructure.
The current manufacturer specification positions visible-light facial authentication as a primary strength. The device can detect and authenticate a face from roughly 30 centimetres to 2 metres, which allows the employee to approach naturally rather than placing the face very close to the terminal. ZKTeco lists facial authentication at under 0.35 seconds and fingerprint authentication at under 0.5 seconds for the current generation. Those figures matter in reception areas and staff entrances because an attendance terminal should not become a bottleneck during shift changes, morning arrivals or end-of-day departures.
Capacity is another practical buying point. The standard specification supports 3,000 faces and 3,000 fingerprints, with optional configurations up to 5,000 for each biometric type. User capacity is listed at 10,000 and transaction storage at 100,000 records, optionally 200,000 on supported configurations. For a small office this may provide substantial headroom, while a larger organisation should still plan retention, synchronisation and software management rather than treating local terminal storage as the full attendance system.
For UAE buyers, the key decision is not simply whether the model name appears on a quotation. Buyers should verify the exact hardware generation, optional Wi-Fi requirement, card technology, software platform and whether the terminal will be used only for attendance or also connected to an electric lock, door sensor and exit button. FourTeck can help review those points before supply, making the product easier to fit into an existing HR, access-control or building-security workflow.
Key Business Benefits
The strongest reason to choose this model is not a single biometric technology. It is the ability to combine several verification methods with practical attendance and door-control functions in a compact wall-mounted terminal.
Multiple ways to verify employees
Face, fingerprint, optional card and password verification give administrators choices when one method is not ideal for every employee. A corporate office may prefer touchless face authentication for daily attendance, while a workshop may retain fingerprint or card methods for specific groups. The value is operational flexibility without deploying a separate device for each credential type.
Fast daily authentication
Fast biometric processing helps reduce queues at busy staff entrances. That becomes especially important when dozens of employees arrive within a short period and the attendance point must remain easy to use.
Room for growing user databases
The standard biometric capacities suit many SMB and mid-sized deployments, while optional higher capacity can be relevant when a project needs more enrolled faces or fingerprints. Planning capacity at the start can reduce unnecessary replacement later.
Attendance plus practical access interfaces
The terminal includes connections for an electric lock, door sensor and exit button, so it can participate in a controlled-door setup when the project design calls for it. This can simplify smaller deployments that want attendance and entry verification at the same point. Final lock wiring, power design, egress requirements and safety compliance should still be reviewed as part of the installation plan.
On-premise or cloud-oriented software options
The current specification lists ZKBio Time and ZKBio CVAccess for on-premise use and ZKBio Zlink for cloud-based management. Buyers can therefore discuss how attendance records should be administered before selecting the final deployment method.
A clearer procurement path
Because multiple MB560-VL revisions appear in regional documentation, confirming the order ID and supported options before buying helps avoid mismatches in camera, algorithm, connectivity or software expectations. FourTeck can include that verification step during quotation.
Strengths That Matter in Daily Use
The device combines touchless face authentication with fingerprint verification and optional credential technologies in one enclosure. Visible-light face detection gives users more freedom to approach from a natural standing position, while the binocular camera and anti-spoofing design are intended to improve authentication integrity compared with basic single-camera face readers.
The physical 16-key keypad is also practical. It supports password-based verification and local data entry without relying entirely on a touchscreen. For facilities that still need conventional card credentials, optional 125 kHz ID, 13.56 MHz IC and selected dual-frequency card configurations can be considered, but the exact module must be specified before ordering.
From a management perspective, TCP/IP is standard and 2.4 GHz Wi-Fi is optional on the current model. This lets a buyer decide between a predictable wired network connection and wireless deployment where cabling is difficult, while still treating Wi-Fi as a configuration decision rather than assuming every unit includes it.
ZKTeco MB560-VL Technical Specifications
The table below follows the current ZKTeco MB560-VL ZAM70 product specification published in 2025. Older regional versions may show different CPU, camera, algorithm or software details, so procurement teams should confirm the exact order ID and supplied revision.
| Specification | Current manufacturer detail |
|---|---|
| Model / Order ID | MB560-VL / AC01-SP07H-P21 |
| Display | 2.8-inch TFT colour LCD, 240 × 320 |
| Camera | Binocular camera, 1 MP WDR |
| Operating system | Linux |
| Processor / memory | Dual-core 1.0 GHz CPU; 512 MB RAM; 8 GB ROM |
| Fingerprint sensor | ZK optical sensor |
| Authentication methods | Fingerprint, face, card and password via physical keypad |
| Fingerprint capacity | 3,000 standard; 5,000 optional |
| Face capacity | 3,000 standard; 5,000 optional |
| Card / user capacity | 10,000 card records; 10,000 users |
| Transaction capacity | 100,000 standard; 200,000 optional |
| Biometric speed | Fingerprint under 0.5 sec; facial authentication under 0.35 sec |
| Face authentication distance | 30 cm to 200 cm |
| Biometric algorithms | ZKFace V4.0; ZKFingerprint V13.0 standard / V10.0 optional |
| Card options | 125 kHz ID, 13.56 MHz IC, or selected dual-frequency ID/IC/DESFire modules depending on configuration |
| Communication | 1 × TCP/IP; optional 2.4 GHz Wi-Fi IEEE 802.11 b/g/n/ax |
| Access interfaces | Electric lock, door sensor and exit button interfaces |
| Standard functions | ADMS, DST, Work Code, photo capture, event photo capture, up to 14-digit user ID, record query, tamper switch alarm, multiple verification methods, T9 keyboard input, HTTPS / SSH backend access, schedule bell and automatic status switch |
| Power | DC 12 V, 1.5 A |
| Operating environment | 0°C to 45°C; 20% to 80% RH, non-condensing |
| Dimensions | 170 × 138 × 38.55 mm |
| Supported software | On-premise: ZKBio Time / ZKBio CVAccess TA Module; cloud-based: ZKBio Zlink with web portal and mobile app |
| Installation / certifications | Wall-mount; ISO 14001, ISO 9001, CE and FCC listed by manufacturer |
When choosing a configuration, prioritise the features that change the delivered hardware: biometric capacity, card module, Wi-Fi and any software or integration requirement. The standard model may be sufficient for an office with a few hundred staff, while a larger project may need optional template or transaction capacity. If card credentials are already deployed, confirm frequency and card technology before ordering. If the terminal will operate a door, the lock type, door sensor, exit method, power arrangement and fail-safe or fail-secure requirement should be reviewed as a complete access-control design rather than treated as a terminal-only purchase.
Configuration and Buyer Guidance
The right purchase starts with how the device will be used, not with the model number alone. Before requesting a quote, define the employee count, authentication method, network connection, door-control scope and software environment.
How many people will enrol?
Count active staff, contractors and any expected growth. Do not size only for today’s headcount. If biometric enrolment could exceed the standard 3,000 face or fingerprint templates, ask whether the optional 5,000 capacity version is required.
Which verification methods are needed?
Face and fingerprint are core biometric methods, but card authentication depends on the selected module. Confirm whether your existing cards are 125 kHz ID, 13.56 MHz IC or another supported format before the purchase order is issued.
Wired Ethernet or optional Wi-Fi?
TCP/IP is the predictable default for a fixed wall-mounted terminal. Choose optional Wi-Fi only where it solves a real cabling constraint and where wireless coverage, security policy and network segmentation have been reviewed.
How will attendance data be managed?
Decide whether the project will use supported ZKTeco on-premise software or a cloud-oriented platform. Also identify any payroll, HR or third-party integration expectations before committing to a specific workflow.
Will the terminal control a door?
If yes, specify the lock, door sensor, exit device, power supply and emergency egress requirements. The terminal has relevant interfaces, but a safe access-control installation is a system design, not simply a cable connection.
Which hardware generation is being quoted?
Ask the supplier to confirm order ID, camera, CPU, algorithm, communication options and supported software. This avoids purchasing an older regional revision when the project specification expects the current ZAM70 generation.
For a useful quotation, send FourTeck the model, required quantity, employee count, preferred authentication methods, card type if any, Wi-Fi requirement, attendance software preference, whether door control is needed, installation location and target delivery date.
Ideal Business Use Cases
This terminal is best suited to controlled indoor business environments where a fixed attendance point can serve a defined employee population and where multi-method authentication improves convenience or resilience.
Corporate office attendance
For head offices and professional workplaces, touchless face authentication can create a smooth arrival experience while fingerprint, card or password methods remain available for selected users. The local user and transaction capacities are practical for many office populations, while software connectivity allows administrators to manage attendance data beyond the terminal itself.
Retail and service branches
Retail stores, clinics and customer-service sites often need a compact attendance point that can be mounted near a staff-only entrance. The MB560-VL can support central record collection when branch network connectivity and software architecture are planned correctly.
Schools and training centres
Education environments may use the terminal for staff attendance and selected controlled-access points. Buyers should define whether the user database covers employees only or a wider population, because capacity planning changes quickly when students or contractors are included.
Warehouses and back-office facilities
Where employees enter through a fixed staff gate or internal door, multiple authentication methods can help accommodate different working conditions. The installation should remain within the specified temperature and humidity range, and placement should avoid environmental conditions outside the product rating.
Attendance plus controlled entry
The lock, door-sensor and exit-button interfaces make the model relevant to smaller controlled-door projects where identity verification and attendance occur at the same point. Safety, power and egress design must still be considered separately.
Is this model suitable for a small office? In many cases, yes. A small office may use only a fraction of the available capacity and benefit from multi-biometric flexibility. However, buyers should still confirm the software workflow and required accessories. Is it suitable for an enterprise campus? It may work as one endpoint in a larger system, but the organisation should review central management, database scale, door architecture and whether a higher-capacity or more centrally managed ZKTeco platform would be a better fit.
ZKTeco MB560-VL Visible-Light Facial Authentication
The face-authentication workflow is designed around a more natural approach distance than older close-range biometric terminals. The current manufacturer specification lists a facial recognition range of 30 centimetres to 200 centimetres and authentication speed below 0.35 seconds. In daily use, that can help employees verify without stopping extremely close to the device or touching a shared sensor.
ZKTeco also describes deep-learning-based pose tolerance and anti-spoofing measures for the product family. That matters because face recognition in a real workplace must cope with people approaching at slightly different angles, variable expressions and ordinary environmental variation. Anti-spoofing is intended to make simple photo or video presentation attacks more difficult than with basic image-matching systems.
The practical buying lesson is to treat face authentication as part of the full deployment. Camera height, user approach path, lighting, enrolment quality and administrator policy all affect the experience. The device includes supplementary lighting, but that does not remove the need for sensible placement. FourTeck can discuss mounting position and user-flow expectations during pre-sales planning.
ZKTeco MB560-VL Multi-Method Verification and Capacity
A key strength of the terminal is that it does not require every employee to authenticate the same way. Standard face and fingerprint capabilities can be combined with optional card technology and password entry. This is useful when a workplace has mixed user needs, when certain employees cannot reliably enrol one biometric, or when an existing card system must remain part of the process.
Capacity should be evaluated with an operational margin. If a company has 2,700 staff today and expects expansion, the standard 3,000 biometric capacity may be too close to the expected ceiling even though it technically fits at the time of purchase. Optional capacity should be discussed before ordering rather than assumed to be a later software unlock.
Card selection also deserves attention. The current specification lists 125 kHz ID and 13.56 MHz IC options, with a dual-frequency module option that can support selected ID, IC and DESFire EV1/EV2 credentials. A buyer should identify the exact card technology already used on site, because matching frequency alone does not always guarantee that every credential format or security configuration will work as expected.
ZKTeco MB560-VL Connectivity, Software and Door Integration
The terminal is most useful when its network and software role is defined before installation. Standard TCP/IP gives a straightforward wired path to the management network. Optional 2.4 GHz Wi-Fi can help when Ethernet cabling is difficult, but wireless should be chosen deliberately because attendance and access devices are infrastructure endpoints that benefit from stable addressing, controlled network access and predictable management.
For software, the current ZKTeco specification lists ZKBio Time and ZKBio CVAccess with the time-attendance module for on-premise environments, plus ZKBio Zlink for cloud-based management through web portal and mobile app. That gives buyers more than one management direction, but the correct choice depends on user count, number of sites, reporting needs, administrator workflow and any HR or payroll integration expectations.
The device also exposes an electric lock output, door-sensor input and exit-button interface. This enables basic access-control deployment, but the terminal should not be treated as the whole door system. The installer must still consider lock voltage and current, separate power supplies where needed, door contact type, emergency exit rules, fire-alarm interaction, cable route and whether the door should fail safe or fail secure.
What Buyers Should Check Before Purchase
The most important purchase risk is receiving a configuration that carries the MB560-VL name but does not match the expected generation, card technology, software support or network option. A short pre-order review can prevent that mismatch.
Configuration Fit
Confirm user count, number of face and fingerprint templates, required transaction history, card type and whether optional Wi-Fi is needed. If the project is close to the standard biometric limit, specify the optional higher-capacity configuration rather than leaving capacity open to interpretation.
Compatibility Check
Review existing card credentials, attendance software, HR processes, network policy and any door hardware. If integrating with third-party software, confirm supported interfaces and responsibility for the integration before purchasing the terminal.
Availability and Warranty
Ask for current UAE availability, exact part or order ID, included accessories and applicable warranty terms on the quotation. Do not assume that Wi-Fi, card modules, power accessories or installation are included unless they are stated clearly.
Quote Preparation
Provide quantity, employee count, authentication methods, card technology, network preference, software choice, door-control need, delivery location and target date. For project supply, also mention rollout stages and whether installation, enrolment assistance or commissioning is required.
What configuration do you need for a 500-person office? Usually the standard capacity provides ample headroom, but the answer still depends on whether every employee will enrol both face and fingerprint templates, whether contractors are included and how records will be managed. Can the terminal work with an existing access-control door? Potentially, because it provides lock, door-sensor and exit-button interfaces, but electrical compatibility and safety design must be checked. Is Wi-Fi required? No. Wired TCP/IP is standard and is often the more predictable choice for fixed infrastructure.
UAE Availability and Service Support
FourTeck supports ZKTeco attendance and access-control enquiries across Dubai and the wider UAE with product selection, configuration review, quotation assistance, delivery coordination and warranty guidance. Availability can vary according to the exact MB560-VL revision, optional card module, Wi-Fi requirement, supplier status and order quantity, so the correct process is to confirm the required configuration before relying on a model-only quotation.
Selection support
Review capacity, biometric method, card technology, network type, software and door-control scope before purchase.
Delivery coordination
Discuss quantity, delivery location, required date and any phased project requirement so supply expectations are clear.
Warranty guidance
Confirm the warranty terms applicable to the quoted source and configuration instead of assuming a universal period.
For a quotation, use the FourTeck contact page and include the project details that affect configuration. Buyers planning a wider physical-security deployment can also review FourTeck CCTV and access control solutions for system-level assistance beyond the terminal itself.
Dubai, Abu Dhabi, Sharjah and Ajman Coverage
Businesses in Dubai, Abu Dhabi, Sharjah and Ajman can contact FourTeck for availability checks, quotation support and configuration guidance for biometric attendance and access-control projects. The same model can be used differently depending on the site: a Dubai head office may prioritise touchless attendance and central software management, while a warehouse in Sharjah may need a controlled staff entrance with a lock, exit button and door sensor.
For multi-site UAE deployments, buyers should provide the quantity per location, expected employee count, network availability and whether all sites will share one management platform. This helps determine whether the requirement is simply terminal supply or a broader rollout involving network preparation, enrolment, software setup and ongoing administration.
GCC and Africa Availability
FourTeck also supports business technology enquiries across selected GCC and Africa markets through regional platforms and enquiry channels. Organisations with procurement teams in the UAE may be sourcing attendance hardware for offices or projects in Saudi Arabia, Qatar, Oman, Kuwait or Bahrain, while other customers may need guidance for deployments in Kenya, Uganda or additional African markets.
Regional supply should be planned carefully because availability, import process, delivery method, warranty handling and compatible software support can differ by country. If several sites will use the same terminal model, it is useful to standardise the hardware generation, card module and software approach so administrators are not left supporting mixed revisions across locations. Multi-country buyers should also check local door-access, data-protection and workplace policies relevant to biometric systems before deployment.
For regional enquiries, buyers can start with FourTeck UAE, FourTeck Kenya, FourTeck Uganda, FourTeck Africa or FourTeck Kuwait. Final options depend on country, quantity and supplier status.
Other Options Buyers May Consider
The MB560-VL is a balanced choice when face and fingerprint authentication are both required in a compact attendance terminal. Buyers with different capacity, interface or management requirements may want FourTeck to compare other ZKTeco families before selecting a final model.
ZKTeco SpeedFace Series
Consider this family when the project requires a newer face-focused access-control platform, larger display options or feature sets beyond a classic attendance terminal. Exact model selection should be based on verified capacity and interface requirements.
ZKTeco SenseFace Series
A useful comparison point for buyers evaluating newer standalone face-based access terminals. The appropriate model depends on user capacity, credential support and management platform.
ZKTeco iClock Series
Relevant when attendance is the primary requirement and a buyer wants to compare against other time-and-attendance terminal formats rather than a face-led access device.
PoE and network support equipment
Biometric systems often share structured cabling and security cabinets with cameras, switches and controllers. Buyers planning a wider security rollout may also need suitable network infrastructure.
The decision difference is usually capacity, credential mix, management method and access-control complexity rather than a simple claim that one model is universally better. FourTeck can review the required employee population, number of doors, software expectations and rollout scale before recommending the MB560-VL or a suitable alternative.
Why Buyers Choose FourTeck
Biometric terminals sit between IT, HR and physical security. A good purchase therefore requires more than reading a capacity number from a catalogue. FourTeck helps buyers connect the product specification to the practical requirements of the site and purchasing process.
Review the exact model, configuration and supplier options instead of relying only on a generic product name.
Match biometric capacity, card technology, network method, software and door interfaces to the project.
Build a clearer request using quantity, delivery location, required options and installation scope.
Discuss location and required date so supply expectations can be aligned with current availability.
Confirm the warranty terms attached to the actual quoted source and product revision.
Consider cabling, networking, door hardware and management software where the terminal forms part of a larger deployment.
This approach is especially useful for SMB and enterprise buyers that need procurement records to match the delivered hardware. A quotation can identify the exact configuration and required options, reducing the chance of discovering after delivery that Wi-Fi, the expected card technology or the desired software workflow was not included.
Frequently Asked Questions
What is the MB560-VL used for?
It is a multi-biometric terminal for time attendance and selected access-control workflows. Organisations can enrol users for face and fingerprint verification, add supported card credentials on the appropriate configuration, and use password authentication. The terminal can also connect to an electric lock, door sensor and exit button when the project includes controlled entry.
How many faces and fingerprints can it store?
The current ZKTeco specification lists 3,000 face templates and 3,000 fingerprint templates as standard, with optional capacity up to 5,000 for each biometric type. Total user capacity is listed at 10,000. Buyers near the standard limit should request the required capacity explicitly before ordering.
Does the terminal support Wi-Fi?
Wi-Fi is optional on the current manufacturer specification, while TCP/IP is standard. If wireless connectivity is required, it should be stated clearly on the quotation request. For a fixed attendance point, wired Ethernet is often preferred when cabling is available because it provides predictable connectivity and easier network management.
Can it work with existing employee cards?
Potentially, but card compatibility depends on the selected card module and the credentials already in use. ZKTeco lists 125 kHz ID and 13.56 MHz IC options, plus selected dual-frequency configurations. Provide a sample card specification or known credential technology so the correct module can be confirmed before purchase.
Which software supports the current version?
The current official specification lists ZKBio Time and ZKBio CVAccess with the time-attendance module for on-premise deployment, and ZKBio Zlink for cloud-based management through a web portal and mobile app. If third-party HR or payroll integration is required, compatibility and integration responsibilities should be confirmed separately.
Why do some online listings show different MB560-VL specifications?
ZKTeco has published older regional documents and a newer 2025 ZAM70 specification. Older listings may show a different CPU, camera, algorithm version or software reference. For procurement, compare the exact order ID and current manufacturer data instead of assuming every unit sold under the same model name is identical.
Is it available in Dubai and the UAE?
FourTeck can check current UAE availability and supplier options based on the required configuration and quantity. Availability can change, especially when optional Wi-Fi, card modules or higher biometric capacity are required. Request a quote with the exact project details so the response can match the intended configuration.
Can FourTeck help with installation planning?
Yes, FourTeck can discuss deployment requirements such as mounting location, network connectivity, door interfaces, quantity and software expectations as part of the buying process. Final installation scope should be agreed in the quotation, especially when electric locks, exit devices, door sensors or wider access-control infrastructure are involved.
What should I provide before asking for a quote?
Provide the model, quantity, employee count, required biometric methods, card type if applicable, Wi-Fi requirement, software preference, whether door control is needed, delivery location and target date. For a multi-site rollout, include the number of terminals per site and whether central management is required.
Can businesses request bulk or project supply?
Business buyers can request quotations for multiple terminals or phased project requirements. For larger orders, it is especially important to standardise the hardware revision, optional modules and software approach across the project. FourTeck can use the quantity and rollout plan to coordinate availability and clarify what is included in the supply scope.
Need Help Choosing the Right MB560-VL Configuration?
FourTeck can review the employee count, biometric methods, card requirement, network preference, software platform, door-control scope, quantity, delivery location and warranty expectations before preparing a quotation. This is especially important when you need the current hardware generation or optional capacity.
Share the required quantity, user count, credential types, network method, delivery location and target use.
Reviews
There are no reviews yet.