ZKTeco SBTL7222 Fingerprint RFID Swing Barrier Turnstile in Dubai, UAE
A dual-lane pedestrian entrance-control solution that combines swing barriers with an integrated controller, fingerprint verification, and RFID card reading.
The SBTL7222 variant belongs to ZKTeco’s SBTL7200 series and is designed for organizations that want controlled passage through reception areas, staff entrances, campuses, commercial facilities, and managed building access points. The core buying decision is not simply the model name: lane arrangement, passage width, credential policy, software environment, power, cabling, and installation conditions must all be confirmed before a project is finalized.
Controlled Pedestrian Entry with Two Credential Methods
The SBTL7222 is the fingerprint-and-RFID member of ZKTeco’s SBTL7200 dual-lane swing barrier family. In practical terms, it is intended to sit between an access-control decision and a physical pedestrian passage: a person presents a valid card or fingerprint, the controller validates the credential according to the configured access policy, and the swing barrier opens to allow passage. This turns a reception point or staff entrance into a managed access lane rather than relying on an unlocked doorway or manual guard intervention for every authorized user.
The platform is especially relevant where organizations want controlled movement without the enclosed feel of a full-height turnstile. ZKTeco specifies a slim 150 mm cabinet width, smooth swing movement, LED indication, infrared sensing, and a maximum throughput figure of up to 30 people per minute under the stated product parameters. Those figures help facility planners estimate how the lane may fit into an entrance, but they do not replace site planning. Real flow depends on credential speed, user behavior, queue design, lane direction, access policy, and the surrounding security process.
For a UAE project, the most important question is whether this specific lane architecture matches the site. The SBTL7200 family is described by ZKTeco as a dual-lane solution and as an additional-lane platform used with the SBTL7000 family. That means a buyer planning two or more passages should verify the complete cabinet arrangement, not assume that one boxed model alone represents the entire finished entrance. Floor dimensions, barrier width, pedestrian direction, adjacent cabinets, power feeds, network or controller cabling, emergency egress requirements, and reader enrollment workflow all deserve review before purchase.
FourTeck can help turn those site details into a clearer procurement request. Buyers can provide the number of entrances, required lane count, expected users, preferred authentication method, existing access-control environment, project location, and target installation date. That information helps distinguish a straightforward equipment request from a larger entrance-control project that may require matching cabinets, mounting preparation, software planning, credentials, cabling, integration, and installation coordination.
Why This Configuration Matters to Business Buyers
The value of this model is the way physical lane control, biometric identity checking, and card-based entry can be brought together in one entrance-control configuration. The benefit is strongest when the access policy and site layout are planned as one system.
Credential-Based Passage Instead of an Open Walkway
A swing barrier gives the access-control system a physical point at which permission is translated into movement. For businesses managing staff-only zones, reception entry, office floors, or controlled campus areas, this helps create a repeatable entry process. The SBTL7222 adds both fingerprint and RFID reading, allowing a project to support card-based access, biometric verification, or policies that use these methods according to the connected controller and software environment.
Designed for Regular Pedestrian Traffic
ZKTeco lists throughput up to 30 people per minute and an opening time of 0.8 seconds for the series. These are useful planning references for office and commercial access points. Actual entrance capacity should still be based on the complete user journey, because slow credential presentation, visitor handling, bag checks, or queue congestion can reduce real-world flow.
Slim Cabinet for Designed Entrances
The listed cabinet is 150 mm wide, helping planners create a controlled passage without oversized side structures. That does not mean the complete installation is narrow: the lane width, adjacent cabinets, clearance, barrier swing, accessibility requirements, and pedestrian approach path all need to be included in the floor plan.
Emergency Passage Consideration
The product family includes emergency mode support, and ZKTeco documentation describes the barriers as allowing passage during a power outage. This matters for entrance design because access control must never be planned in isolation from the building’s life-safety and egress requirements. The final installation should be reviewed against local project rules and the required emergency behavior.
Brushless Motor and High Cycle Reference
ZKTeco lists a brushless motor design and an MCBF reference of five million cycles for the SBTL7200 series. For procurement teams, the practical takeaway is that the platform is intended for repeated gate movement. Preventive maintenance, correct installation, clean sensor alignment, stable power, and suitable environmental protection still influence long-term performance.
Standard and Wider Passage Planning
The specified lane width is 660 mm with an optional configuration up to 900 mm. Buyers should not treat the wider option as automatic. It needs to be confirmed for the selected build, barrier material, site geometry, accessibility needs, and complete lane arrangement before the order is placed.
A Compact Biometric Swing Barrier Built Around Entrance-Control Workflow
The defining difference of SBTL7222 within the family is the reader configuration: ZKTeco identifies it as the SBTL7200 dual-lane swing barrier variant equipped with a controller plus fingerprint and RFID readers. That makes it more directly suited to a project that already intends to authenticate users at the barrier, rather than buying a plain cabinet and deciding on reader hardware later.
The physical platform uses cold-rolled sheet cabinet and lid construction with powder coating, acrylic barrier material with tempered-glass option, LED indication, six pairs of infrared sensors with an optional ten-pair arrangement, and swing movement. Running power is listed at 30 W, while the operating input is AC 110/220 V at 50/60 Hz. These facts are useful to the electrical and site-preparation team because the barrier needs stable power and coordinated installation, not just a network connection.
- Fingerprint and RFID reader integration on SBTL7222
- Dual-lane SBTL7200 family architecture
- 0.8 s listed opening time
- Up to 30 people/minute listed throughput
- Six infrared sensor pairs; ten optional
- LED indicator support
- Emergency mode support
- Indoor or sheltered outdoor use
ZKTeco SBTL7222 Technical Specifications
The values below are based on ZKTeco’s official SBTL7200 series product listing. The SBTL7222 designation specifically identifies the version with a controller plus fingerprint and RFID readers. Optional items and project-specific integration should be confirmed before purchase.
| Specification | Vendor-listed detail | Buyer note |
|---|---|---|
| Brand / Model | ZKTeco SBTL7222 | SBTL7200 family variant |
| Variant configuration | Controller + fingerprint readers + RFID readers | Confirm software and credential workflow |
| Power requirements | AC 110V/220V, 50/60Hz | Plan protected local power |
| Running power | 30W | Per vendor listing |
| Working temperature | -20°C to 70°C | Outdoor use requires shelter |
| Working humidity | 5% to 95% | Site conditions still need review |
| Working environment | Indoor / outdoor if shelter available | Do not assume exposed-weather installation |
| Infrared sensors | 6 pairs; optional 10 pairs | Confirm selected configuration |
| Maximum throughput | Up to 30 people per minute | Real flow depends on access process |
| Lane width | 660 mm; optional up to 900 mm | Verify floor plan and access needs |
| Dimensions (L×W×H) | 1200 × 150 × 1028 mm | Series cabinet reference |
| Packed dimensions | 1290 × 330 × 1184 mm | Useful for logistics planning |
| Net / packed weight | 72 kg / 92 kg | Allow safe handling and fixing |
| Cabinet / lid material | Cold-rolled sheet | Powder-coated finish |
| Barrier material | Acrylic; tempered glass optional | Confirm preferred option |
| Barrier movement | Swing | Keep swing path clear |
| Opening time | 0.8 seconds | Vendor reference value |
| Opening noise | ≤30 dB | Quiet-operation reference |
| MCBF | 5 million | Maintenance and installation still matter |
| Emergency mode | Supported | Coordinate with building safety requirements |
| Warranty reference | 1 year on ZKTeco international product page | Confirm supplied UAE warranty on quote |
When selecting the final configuration, focus first on the physical entrance architecture and then on the credential workflow. A 660 mm lane can be appropriate for standard pedestrian movement, while a wider option may be required for a specific accessibility or site requirement; the exact supported build should be confirmed. Likewise, choosing fingerprint and RFID at the gate does not by itself define the complete access system. User enrollment, controller database, software version, door and gate permissions, network communication, backup procedures, visitor handling, and emergency behavior all belong in the project plan. Buyers should also confirm whether acrylic or optional tempered-glass barriers are preferred, whether six sensor pairs are sufficient, and how the lane will be protected if installed in a semi-outdoor area.
Configuration and Buyer Guidance
The right purchase starts with the site, not the catalogue. Before requesting a quotation, answer the questions below so the gate, reader setup, and installation scope are aligned with the way people will actually enter the building.
How many complete lanes are required?
This is the highest-risk question. SBTL7222 is part of a dual-lane/additional-lane family, so the quantity of cabinets and matching lane components must be mapped against the final entrance layout. Share a floor plan or simple lane sketch if possible.
Which credential policy will be used?
Decide whether employees will use RFID cards, fingerprints, or a policy that uses both methods in different situations. Confirm enrollment responsibility, user database size, lost-card process, biometric enrollment process, and how visitor access will be handled.
What passage width is needed?
The series is listed at 660 mm with an optional wider configuration up to 900 mm. The correct choice depends on user profile, building layout, local accessibility requirements, barrier arrangement, and whether carts, luggage, or service movement share the entrance.
How will the system connect?
Confirm the controller, access software, network path, power feed, reader data, and any interface required with doors, lifts, visitor management, attendance, or security monitoring. Compatibility should be verified from the actual project environment rather than assumed from brand name alone.
Is the installation environment protected?
ZKTeco lists the unit for indoor use or outdoor use when shelter is available. A covered entrance, drainage, floor condition, dust exposure, direct rain, heat sources, and electrical protection should therefore be assessed before the product is fixed in place.
What should you send for a useful quote?
Share the exact model, quantity, lane count, required width, credential method, existing software or controller details, delivery location, target date, installation requirement, and preferred warranty or support expectation. A photo or layout drawing can reduce ambiguity.
Where the SBTL7222 Fits Best
This model suits sites that already have a clear reason to authenticate pedestrians at a controlled physical lane. It is not a substitute for a complete security policy; it is the gate layer that enforces a credential decision at the entrance.
Corporate Reception and Staff Entrances
A common fit is a building where employees already use cards or biometrics and the reception team needs a defined boundary between public and controlled space. Staff can authenticate at the lane while visitors follow a separate registration or escorted-entry process. Because the system offers both RFID and fingerprint reading, administrators can design different credential policies for regular employees, contractors, or special access groups, subject to the connected access-control system.
Education and Campus Buildings
Universities, training centers, and controlled campus facilities may use swing barriers where authorized users need repeatable access through a busy entrance. The buyer should plan peak arrival periods, student or staff enrollment, visitor procedures, accessibility, and the number of lanes required to prevent queues.
Commercial and Mixed-Use Buildings
A managed lobby can use the barrier to separate public circulation from tenant or staff zones. The project should confirm how cards are issued, whether different tenants share the same credential platform, and whether the barrier needs integration with visitor management or lift access.
Industrial and Office Facilities
Factories, logistics offices, and administrative buildings can use a controlled pedestrian gate at staff access points where vehicle entrances are separate. Fingerprint verification may be useful when card sharing is a concern, while RFID offers fast everyday credential presentation. The exact policy should be aligned with HR, security, and privacy requirements.
Gym, Club, or Member Access
Membership-based venues can use a barrier when access validity is linked to a credential and a controlled entrance is desirable. Integration capability, membership software workflow, peak-time traffic, guest entry, and emergency egress should be confirmed before this application is chosen.
SBTL7222 Fingerprint and RFID Authentication
The key functional difference of this variant is that the entrance lane is delivered around two familiar identity methods: fingerprint verification and RFID card reading. That gives a business more flexibility than a card-only gate. A fast RFID workflow can suit regular staff, while biometric verification can support situations where the organization wants stronger linkage between the credential and the individual user.
However, the presence of both readers does not automatically define a two-factor policy. Whether a person must present one credential or multiple credentials depends on the controller, software, configuration, and security policy. Buyers should decide this early because it affects enrollment, user training, queue time, fallback procedures, and support. Fingerprint enrollment also introduces practical considerations such as data governance, sensor cleanliness, user exceptions, and alternative access for people whose fingerprints cannot be reliably read.
SBTL7222 Lane Flow, Sensors and Emergency Behavior
A successful turnstile project depends on more than opening speed. The barrier must detect passage, support a predictable lane direction, and respond appropriately when normal operating conditions change. ZKTeco lists six pairs of infrared sensors for the series, with ten pairs available as an option, together with LED indication and emergency mode support. The barrier movement is swing-based, and the listed opening time is 0.8 seconds.
For a busy entrance, the buyer should test assumptions against peak traffic rather than average traffic. A site that sees 300 employees arriving during a narrow shift-change window may need more lane capacity than an office with the same headcount spread across an hour. Likewise, visitor checks, bag inspection, fingerprint retries, or security-desk intervention can become the true bottleneck. The barrier should therefore be planned as part of the entire arrival process.
SBTL7222 Physical Installation and Long-Term Maintainability
The SBTL7200 family uses a cold-rolled sheet cabinet and lid with powder coating, a compact cabinet width, and a brushless motor. Those characteristics are relevant to long-term ownership because entrance gates are mechanical-electronic systems: they need correct floor fixing, alignment, clean sensing, stable power, and access for maintenance. A visually clean installation that is difficult to service can create avoidable downtime later.
Decision checklist
- Confirm the finished floor can accept secure fixing.
- Leave maintenance access around the cabinet.
- Keep the swing path free of furniture and queue barriers.
- Provide stable, protected electrical power.
- Plan data and control cabling before floor completion.
- Use shelter where the installation is not fully indoors.
Why it matters
A turnstile can be mechanically reliable yet perform poorly if sensors are obstructed, the cabinet is misaligned, the floor flexes, or water reaches an installation that was expected to be sheltered. Planning service access and environmental protection before purchase reduces the chance that the finished entrance becomes hard to maintain. For projects with multiple lanes, consistent mounting and commissioning across all cabinets is equally important.
What Buyers Should Check Before Purchase
The biggest purchase risk is ordering the right model name but the wrong lane architecture or integration scope. Confirm how many physical passages are required, what cabinets make up each passage, how users authenticate, and how the controller connects to the existing security environment.
Configuration Fit
Verify the lane count, standard or wider passage requirement, barrier material, sensor configuration, controller setup, and whether SBTL7222 is being used as part of a multi-cabinet entrance. If the project drawing is not clear, send the proposed floor plan before asking for a final equipment quantity.
Compatibility Check
Confirm the access-control software, credential database, enrollment devices, network design, power source, and any connection to visitor management, attendance, lifts, alarms, or security monitoring. A buyer replacing an older gate should also verify floor footprint and cable positions rather than assuming drop-in compatibility.
Availability and Warranty
Availability can change by quantity, selected options, and supplier status. ZKTeco’s international page lists a one-year warranty reference for the series, while regional programs may differ. Ask FourTeck to state the applicable supplied warranty, delivery expectation, and included items on the quotation so the commercial scope is clear.
Quote Preparation
Provide the quantity, lane drawing, expected users per day, peak traffic period, required credential method, delivery location, installation requirement, target date, and any known controller or software environment. For project supply, include whether accessories, credentials, commissioning, or training are expected.
Buying Support for Dubai and UAE Projects
FourTeck supports product inquiries for Dubai and the wider UAE with help around product selection, configuration review, quotation, delivery coordination, and warranty guidance. For an entrance-control product, the useful commercial conversation starts with the project scope. A simple one-unit inquiry may be different from a multi-lane corporate entrance that requires matching cabinets, controller planning, credentials, software coordination, installation, and commissioning.
Availability is not presented as guaranteed stock. It may vary according to supplier position, option choice, order quantity, and project timing. For the most useful response, include whether the request is for equipment only or whether you also need support reviewing installation and integration requirements.
Dubai, Abu Dhabi, Sharjah and Ajman Requirements
Businesses in Dubai, Abu Dhabi, Sharjah, Ajman, and other UAE locations can contact FourTeck for model availability, lane-configuration guidance, and quote assistance. The commercial requirement should include the delivery destination because site access, project timing, quantity, and installation coordination can influence the supply plan.
For new buildings, it is helpful to involve the entrance-control requirement before flooring and reception finishes are locked down. Power routes, conduit positions, floor fixing, access lane spacing, guard-desk visibility, accessible passage, and emergency circulation are easier to plan before final fit-out. For retrofit projects, photographs and measured drawings help identify whether the existing opening, floor condition, and cable route can support the proposed swing barrier arrangement.
GCC and Africa Availability Guidance
FourTeck also supports business technology inquiries across selected GCC and Africa markets through its regional inquiry channels. Organizations in Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Kenya, Uganda, and other supported locations can submit project requirements for product sourcing and configuration discussion. Availability, shipping method, warranty handling, local taxes, and project support can vary by country and should be confirmed for the specific order.
Entrance-control projects are particularly sensitive to local installation conditions and support arrangements. A product that is mechanically the same can still require different power planning, site preparation, import handling, warranty process, or installation coordination. Buyers should therefore share the destination country, quantity, lane drawing, and whether the request is equipment-only or part of a larger security project.
Other ZKTeco SBTL7200 Family Options Buyers May Consider
The right alternative depends mainly on which readers and controller arrangement are required. ZKTeco’s official family listing identifies distinct SBTL7200 variants, which makes it possible to avoid paying for a biometric configuration when the project only needs card access, or to choose a base unit when readers will be handled differently.
ZKTeco SBTL7211
Consider this family variant when the project requires a controller and RFID readers but does not require the fingerprint reader configuration associated with SBTL7222.
ZKTeco SBTL7200
Consider the base dual-lane family model when reader and controller requirements will be specified separately. Confirm the exact project BOM before treating it as interchangeable with reader-equipped variants.
ZKTeco SBTL7000
The SBTL7000 is the related single-lane family that ZKTeco references alongside the SBTL7200 additional-lane design. It may be part of a complete multi-lane entrance arrangement.
Entrance Control Requirement Review
If the buyer is unsure whether swing barriers, flap barriers, tripod turnstiles, or another access lane type fits the site, FourTeck can review the user flow and entrance objective before quoting.
Procurement Support Beyond the Model Number
A turnstile project becomes easier to purchase when the equipment list reflects the actual entrance. FourTeck’s role is to help business buyers turn operational requirements into a clearer procurement request, without presenting unverified stock, pricing, or partnership claims.
Questions Business Buyers Ask About the SBTL7222
What is the ZKTeco SBTL7222 used for?
It is used to control pedestrian passage through a swing barrier using fingerprint and RFID credentials. The model is part of ZKTeco’s SBTL7200 dual-lane family and includes a controller plus fingerprint and RFID readers. It suits managed entrances where authorized staff, members, students, tenants, or other approved users need to be verified before entering a controlled area.
Is SBTL7222 a complete two-lane entrance by itself?
Do not assume the project quantity from the model name alone. ZKTeco describes the SBTL7200 family as a dual-lane solution and as an additional-lane design used with the SBTL7000 family. The complete cabinet arrangement should be confirmed from the entrance drawing. Send FourTeck the number of required passages and a floor-plan sketch so the required units can be reviewed.
Can users enter with either fingerprint or RFID card?
The SBTL7222 variant is identified with both fingerprint and RFID readers, so both credential technologies are available at the product level. The actual access policy depends on the connected controller and software configuration. A project can be designed around card access, biometric access, or another supported rule, but the final authentication sequence should be confirmed during system configuration.
What lane width should I choose?
ZKTeco lists a standard 660 mm lane width with an optional configuration up to 900 mm. The correct choice depends on the site, user population, accessibility requirement, barrier arrangement, and whether people may pass with luggage or service items. Confirm the wider option before ordering rather than assuming it is included in every SBTL7222 configuration.
Can the turnstile be installed outdoors?
The official series listing states indoor use or outdoor use when shelter is available. That means a buyer should not treat the cabinet as suitable for unrestricted exposure to rain and weather. For semi-outdoor entrances, review canopy coverage, drainage, floor condition, power protection, direct heat, dust, and service access before the installation is approved.
What happens during a power failure?
ZKTeco lists emergency mode support for the series and describes the barrier as allowing passage during a power outage. The exact behavior should be tested and coordinated with the building’s emergency plan during commissioning. Entrance control is part of a wider life-safety environment, so local project requirements and escape-route rules must also be considered.
Is the product available in Dubai and the UAE?
FourTeck can support inquiries for Dubai and other UAE locations, but availability can vary according to project quantity, options, supplier status, and timing. Submit the model, required quantity, lane configuration, delivery location, and target date for a current quotation. If the site is still being designed, include the expected lane count and authentication requirement.
What warranty applies to SBTL7222?
ZKTeco’s international SBTL7200 product page lists a one-year warranty reference, while regional warranty programs can differ. The warranty that matters to a UAE buyer is the warranty stated on the actual FourTeck quotation and supply terms. Ask for the covered period, process, and any installation or misuse exclusions to be clarified before placing the order.
What information should I provide for a project quote?
Provide the exact model, number of lanes, quantity, standard or wider passage requirement, expected daily and peak traffic, fingerprint and RFID policy, current access-control software or controller, project location, target date, and whether installation or commissioning support is required. A drawing or entrance photo can help clarify the correct cabinet arrangement and site constraints.
Should I choose SBTL7211 instead?
SBTL7211 is the family variant ZKTeco identifies with a controller and RFID readers, while SBTL7222 adds fingerprint readers as well. If the project is card-only, the RFID variant may be more suitable. If biometric verification is part of the access policy, SBTL7222 is the relevant family option. FourTeck can help review the requirement before the final model is quoted.
Need Help Planning the Right Entrance Configuration?
FourTeck can review the intended lane count, fingerprint and RFID requirement, passage width, existing access-control environment, project quantity, delivery location, and support expectations before preparing a quotation. This helps avoid ordering a correct model with an incomplete lane or integration scope.
Share the model, lane drawing, required quantity, authentication policy, delivery location, and target date.
